Study guide

5.1 Chlorination Chemistry & Breakpoint Curves

California Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Water Regulatory Framework & Certification Ladders

1.1 State Water Board & Regional Boards Structure 1.2 Drinking Water Certification: T1-T5 & D1-D5 Requirements 1.3 Wastewater Certification: Grades I-V & OIT Requirements 1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants 1.5 California Waterworks Standards (Title 22, Chapter 16) 1.6 Public Water System Types, Permits & the Sanitary Survey

2 Chapter 2: California Water Rights, Title 22 & Environmental Policy

2.1 California Title 22 Recycled Water Standards 2.2 California Environmental Quality Act (CEQA) & Proposition 218 2.3 Water Rights & California Water Resources

3 Chapter 3: Drinking Water Source Quality & Coagulation/Flocculation

3.1 Source Water Quality & Watershed Management 3.2 Coagulation Chemistry & Flash Mixing 3.3 Flocculation & Jar Testing 3.4 Wells, Aquifers & Groundwater Hydraulics 3.5 Raw Water Storage, Clearwells & Reservoir Management

4 Chapter 4: Clarification & Granular Media Filtration

4.1 Sedimentation & Advanced Clarification 4.2 Granular Media Filtration Mechanics & Media Types 4.3 Filter Operation, Backwash Cycles & SWTR Compliance

5 Chapter 5: Disinfection, Oxidation & Advanced Water Treatment

5.1 Chlorination Chemistry & Breakpoint Curves 5.2 Disinfection Kinetics & CT Calculations 5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide 5.4 Advanced Treatment: Membranes, AOP & PFAS Adsorption 5.5 Chloramination & Nitrification Control 5.6 Iron & Manganese Removal 5.7 Fluoridation Practice & Compliance 5.8 Corrosion Control Treatment & Water Stability 5.9 Taste & Odor Control and Algal Toxin Management

6 Chapter 6: Wastewater Preliminary & Primary Treatment

6.1 Preliminary Treatment: Screening & Grit Removal 6.2 Primary Clarification Operations 6.3 Primary Sludge Characteristics & Pumping 6.4 Stabilization Ponds, Lagoons & Small-Plant Processes

7 Chapter 7: Secondary Biological Treatment & Activated Sludge

7.1 Activated Sludge Process Fundamentals 7.2 Process Control Parameters: F/M, MCRT & SVI 7.3 Activated Sludge Microbiology & Troubleshooting 7.4 Fixed-Film & Hybrid Biological Processes

8 Chapter 8: Biological Nutrient Removal, Water Reuse & Solids Handling

8.1 Biological Nitrogen Removal: Nitrification & Denitrification 8.2 Biological Phosphorus Removal (EBPR) & Chemical Precipitation 8.3 Anaerobic & Aerobic Digestion 8.4 Sludge Thickening, Dewatering & Biosolids Disposal 8.5 Wastewater Disinfection: Chlorination, Dechlorination & UV

9 Chapter 9: Distribution Systems, Collection Networks & Hydraulics

9.1 Hydraulics, Pressure & Flow Dynamics 9.2 Centrifugal Pumps, Motors & VFDs 9.3 Distribution Network Infrastructure & Cross-Connection Control 9.4 Wastewater Collection Systems, SSMP & FOG Management

10 Chapter 10: Laboratory Analytics, Safety & Water Math

10.1 Water & Wastewater Laboratory Methods 10.2 Laboratory Quality Assurance & Regulatory Reporting 10.3 Chemical Safety, Hazardous Gases & Confined Space 10.4 Essential Water & Wastewater Math for Operators

11 Chapter 11: Federal & California Drinking Water Rules

11.1 The Revised Total Coliform Rule & Assessments 11.2 The Lead and Copper Rule and Service Line Replacement 11.3 Surface Water Treatment Rules & Log Removal Credit 11.4 Stage 1 & Stage 2 Disinfection Byproduct Rules 11.5 Secondary MCLs, Notification Levels & Response Levels 11.6 Public Notification, Consumer Confidence Reports & Recordkeeping

12 Chapter 12: Distribution System Design, Demand & Hydraulics

12.1 System Layout, Pressure Zones & Distribution Maps 12.2 Water Demand, Peaking Factors & Fire Flow 12.3 Distribution Storage: Types, Sizing & Turnover 12.4 Head Loss, C-Factor & Distribution Hydraulic Calculations 12.5 Water Hammer, Surge Control & Air Management

13 Chapter 13: Distribution Equipment Operation, Maintenance & Inspection

13.1 Valves: Types, Operation & Exercising Programs 13.2 Fire Hydrants: Types, Testing & Maintenance 13.3 Water Meters: Types, Accuracy & Meter Management 13.4 Instrumentation, In-Line Sensors, Telemetry & SCADA 13.5 Electrical Systems, Motors & Standby Generators 13.6 External Corrosion, Cathodic Protection & Asset Inspection

14 Chapter 14: Water Mains, Piping & Field Construction

14.1 Pipe Materials & Pipe Selection 14.2 Joints, Fittings, Thrust Restraint & Bedding 14.3 Main Installation, Tapping & Service Line Installation 14.4 Leak Detection, Water Loss Auditing & Main Repair 14.5 Main Cleaning & Maintenance: Flushing, Pigging & Lining 14.6 Excavation, Trench Safety & Utility Locating

15 Chapter 15: Disinfecting Distribution Facilities & Maintaining Water Quality

15.1 Water Main Disinfection (AWWA C651) 15.2 Disinfecting Storage Reservoirs (C652) & Wells (C654) 15.3 Maintaining Distribution Water Quality: Residual, Biofilm & Discolored Water 15.4 Cross-Connection Control Program Administration & Device Testing

16 Chapter 16: Plant Equipment, Chemical Feed & Maintenance

16.1 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 16.2 Gas Chlorination Equipment & Hypochlorite Systems 16.3 Blowers, Compressors & Aeration Equipment 16.4 Flow Measurement Devices: Meters, Weirs & Flumes 16.5 Preventive Maintenance, CMMS & Asset Management

17 Chapter 17: Utility Management, Administration & Emergency Response

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group 17.2 Budgets, Water Rates & Financial Management 17.3 Operator Training, Staffing & Safety Program Development 17.4 Energy Management & Optimization 17.5 Emergency Response Planning, Risk & Resilience & Security 17.6 Water Conservation Planning & Drought Response

18 Chapter 18: Applied Operator Mathematics Workshop

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis 18.2 Distribution & Hydraulic Math Workshop 18.3 Treatment & Wastewater Process Math Workshop

5.1 Chlorination Chemistry & Breakpoint Curves

Key Takeaways Explain This Topic AI

Gaseous chlorine (Cl₂, 100% available chlorine) hydrolyzes rapidly in water to form hypochlorous acid (HOCl), which dissociates into hypochlorite ion (OCl⁻) in a reversible, pH-dependent equilibrium with a pKa of 7.5 at 25°C.

Hypochlorous acid (HOCl) is 80 to 100 times more potent as a germicide than hypochlorite ion (OCl⁻) because its neutral electrical charge allows it to readily penetrate negatively charged microbial cell walls.

Commercial sodium hypochlorite (NaOCl, 12.5% trade available chlorine, pH 11–13) and calcium hypochlorite (Ca(OCl)₂, 65% available chlorine) generate the identical active disinfecting species in water as chlorine gas but alter pH and alkalinity differently.

Chlorine reacts sequentially with inorganic ammonia to form monochloramine (NH₂Cl, dominant at pH > 8.0), dichloramine (NHCl₂, dominant at pH 5.0–7.0, causing strong chlorinous odors), and trichloramine (NCl₃, dominant at pH < 4.5, causing severe eye and respiratory irritation).

The breakpoint chlorination curve comprises four distinct phases: Zone 1 (oxidation of inorganic reducing agents), Zone 2 (formation of chloramines and organochlorines), Zone 3 (oxidative destruction of chloramines releasing N₂ and N₂O), and Zone 4 (appearance of free available chlorine residual with a 1:1 proportional increase relative to applied dose).

Last updated: August 2026

Chlorination Chemistry & Breakpoint Curves

Chlorination is the most widely deployed chemical disinfection process in municipal drinking water and wastewater treatment across California. Developed and refined over more than a century, chlorination provides two distinct public health protections: primary disinfection (inactivating pathogenic bacteria, viruses, and protozoan cysts within the treatment plant contact basin) and secondary disinfection (maintaining a persistent chemical residual throughout the distribution conveyance network to suppress bacterial regrowth and protect against cross-connection contamination).

To manage disinfection processes effectively, certified operators must master the chemical equilibria of aqueous chlorine, the differences among commercial chlorine chemical feedstocks, the kinetics of chlorine reactions with inorganic and organic compounds, and the mechanics of the breakpoint chlorination curve.

Chemical Delivery Forms of Chlorine

Water and wastewater treatment facilities utilize three primary chemical forms of chlorine, each possessing unique physical properties, available chlorine content, storage requirements, and operational safety protocols.

Chemical Form Available Chlorine (%) Physical State / Appearance pH & Water Chemistry Impact Typical Handling & Application

Chlorine Gas ( Cl 2 \text{Cl}_2 Cl 2 ​ ) 100% Compressed liquefied amber gas; vaporizes to greenish-yellow gas (2.49x heavier than air) Depresses pH; consumes 0.7–1.4 mg/L alkalinity (as CaCO 3 \text{CaCO}_3 CaCO 3 ​ ) per 1 mg/L Cl 2 \text{Cl}_2 Cl 2 ​ fed Vacuum-operated chlorinators, 150-lb cylinders, 1-ton containers, emergency scrubbers

Sodium Hypochlorite ( NaOCl \text{NaOCl} NaOCl ) 10% to 15% (12.5% trade) Corrosive yellowish liquid solution (pH 11.0–13.0) stabilized with NaOH \text{NaOH} NaOH Raises pH slightly; conserves alkalinity; naturally degrades to NaClO 3 \text{NaClO}_3 NaClO 3 ​ and O 2 \text{O}_2 O 2 ​ gas Bulk HDPE tanks, positive displacement or peristaltic metering pumps with degassing valves

Calcium Hypochlorite ( Ca(OCl) 2 \text{Ca(OCl)}_2 Ca(OCl) 2 ​ ) 65% Dry white granular powder, compressed tablets, or briquettes Raises pH; adds calcium hardness (increases scaling potential in hard waters) Dry storage away from organics/fuels; dry tablet feeders or batch solution preparation tanks

1. Gaseous Chlorine ( C l 2 Cl_2 C l 2 ​ )

Physical Properties: Elemental chlorine is supplied under pressure as a heavy amber-colored liquid in 150-lb cylinders, 1-ton containers, or railcars. When vaporized, liquid chlorine expands 460 times into a greenish-yellow gas that is approximately 2.5 times heavier than air (specific gravity ≈ 2.49 \approx 2.49 ≈ 2.49 ). Because the gas is denser than ambient air, accidental releases migrate along the floor, collect in low-elevation sumps, and travel downhill.

Available Chlorine Equivalent: 100% available chlorine by definition.

Safety & Handling: Chlorine gas is a severe pulmonary irritant and toxic inhalation hazard. Facilities must maintain automatic vacuum-operated chlorinators, sulfur dioxide or caustic scrubbers, emergency repair kits (Kit A for 150-lb cylinders, Kit B for 1-ton containers, Kit C for tank cars), and continuous atmospheric gas detectors calibrated to alarm at 0.5 ppm (warning) and 1.0 to 3.0 ppm (evacuation / emergency scrubber activation).

2. Sodium Hypochlorite ( N a O C l NaOCl N a OCl )

Physical Properties: Liquid bleach solution containing dissolved sodium hypochlorite in water. Commercial grade typically contains 12.5% trade available chlorine (approximately 125 g/L available C l 2 Cl_2 C l 2 ​ , or ~10.8% available chlorine by weight). It is strongly alkaline, with a pH ranging from 11.0 to 13.0 , stabilized with residual sodium hydroxide ( N a O H NaOH N a O H ) to prevent premature decomposition.

Decomposition Factors: Sodium hypochlorite solutions are inherently unstable and naturally degrade over time into sodium chloride ( N a C l NaCl N a Cl ), sodium chlorate ( N a C l O 3 NaClO_3 N a Cl O 3 ​ ), and oxygen gas ( O 2 O_2 O 2 ​ ). The decomposition rate accelerates dramatically in the presence of:

Elevated Temperature: Storage temperatures above 20°C (68°F) significantly shorten chemical shelf life; tanks should be stored in temperature-controlled or shaded enclosures.

Ultraviolet Light: Direct sunlight promotes photolytic breakdown; bulk storage requires opaque, UV-stabilized high-density cross-linked polyethylene (HDPE) or fiberglass reinforced plastic (FRP) tanks.

Transition Metal Catalysts: Minute trace concentrations of iron ( F e Fe F e ), nickel ( N i Ni N i ), copper ( C u Cu C u ), or manganese ( M n Mn M n ) catalyze rapid decomposition.

Operational Hazard: Off-gassing of oxygen inside chemical feed suction lines and positive displacement diaphragm pump heads causes gas binding (vapor lock) , interrupting chemical dosing unless degassing valves or peristaltic pumps are used.

3. Calcium Hypochlorite ( C a ( O C l ) 2 Ca(OCl)_2 C a ( OCl ) 2 ​ )

Physical Properties: Solid dry chemical available as white granules, compressed tablets, or briquettes containing approximately 65% available chlorine by weight (trade names include HTH).

Safety & Storage: Calcium hypochlorite is a potent Class 3 oxidizing agent. It reacts violently and exothermically with organic materials, petroleum products, oils, greases, solvents, and acids, potentially causing spontaneous combustion and toxic gas release. It must be stored in cool, dry, well-ventilated areas away from any combustible materials.

Operational Impact: When dissolved in water, calcium hypochlorite releases calcium ions ( C a 2 + Ca^{2+} C a 2 + ), which increases the finished water's total calcium hardness. In high-alkalinity waters, this can cause calcium carbonate ( C a C O 3 CaCO_3 C a C O 3 ​ ) scale precipitation on pump impellers, injector nozzles, and carrier piping.

Aqueous Chlorine Chemistry & pH Dissociation Equilibrium

Regardless of whether chlorine is fed as gas ( C l 2 Cl_2 C l 2 ​ ), sodium hypochlorite ( N a O C l NaOCl N a OCl ), or calcium hypochlorite ( C a ( O C l ) 2 Ca(OCl)_2 C a ( OCl ) 2 ​ ), identical chemical disinfecting species are produced once dissolved in water.

Step 1: Hydrolysis of Chlorine

When gaseous chlorine dissolves in water, it undergoes a rapid, virtually instantaneous hydrolysis reaction (completed in less than 1 second) to form hypochlorous acid ( H O C l HOCl H OCl ) , hydrogen ions ( H + H^+ H + ), and chloride ions ( C l − Cl^- C l − ): Cl 2 + H 2 O ⇌ HOCl + H + + Cl − ( K h = 4.5 × 10 − 4 at 25 ∘ C ) \text{Cl}_2 + \text{H}_2\text{O} \rightleftharpoons \text{HOCl} + \text{H}^+ + \text{Cl}^- \quad (K_h = 4.5 \times 10^{-4} \text{ at } 25^\circ\text{C}) Cl 2 ​ + H 2 ​ O ⇌ HOCl + H + + Cl − ( K h ​ = 4.5 × 1 0 − 4 at 2 5 ∘ C )

Notice that the hydrolysis of chlorine gas produces hydrochloric acid ( H + + C l − H^+ + Cl^- H + + C l − ), which consumes ambient water alkalinity and depresses the pH. For every 1.0 mg/L of chlorine gas ( C l 2 Cl_2 C l 2 ​ ) added , approximately 0.7 to 1.4 mg/L of alkalinity (as C a C O 3 CaCO_3 C a C O 3 ​ ) is consumed.

When sodium hypochlorite is added to water, it hydrolyzes without generating free hydrochloric acid: NaOCl + H 2 O ⇌ HOCl + Na + + OH − \text{NaOCl} + \text{H}_2\text{O} \rightleftharpoons \text{HOCl} + \text{Na}^+ + \text{OH}^- NaOCl + H 2 ​ O ⇌ HOCl + Na + + OH −

This reaction releases hydroxyl ions ( O H − OH^- O H − ), slightly increasing the pH and conserving ambient water alkalinity.

Step 2: Acid-Base Dissociation Equilibrium of Hypochlorous Acid

Hypochlorous acid ( H O C l HOCl H OCl ) is a weak acid that partially dissociates in water into hydrogen ions ( H + H^+ H + ) and hypochlorite ions ( O C l − OCl^- OC l − ) in a reversible, instantaneous equilibrium governed by solution pH and temperature: HOCl ⇌ H + + OCl − ( p K a = 7.54 at 25 ∘ C ) \text{HOCl} \rightleftharpoons \text{H}^+ + \text{OCl}^- \quad (pK_a = 7.54 \text{ at } 25^\circ\text{C}) HOCl ⇌ H + + OCl − ( p K a ​ = 7.54 at 2 5 ∘ C )

The sum of hypochlorous acid and hypochlorite ion concentration is defined as Free Available Chlorine (FAC) : Free Available Chlorine = [ HOCl ] + [ OCl − ] \text{Free Available Chlorine} = [\text{HOCl}] + [\text{OCl}^-] Free Available Chlorine = [ HOCl ] + [ OCl − ]

Water pH Hypochlorous Acid ( HOCl \text{HOCl} HOCl ) % Hypochlorite Ion ( OCl − \text{OCl}^- OCl − ) % Primary Active Disinfecting Species Relative Disinfection Germicidal Efficacy

  • 6.0 97% 3% HOCl \text{HOCl} HOCl (Dominant) Very High (Rapid bacterial & viral kill)
  • 6.5 90% 10% HOCl \text{HOCl} HOCl (Dominant) High (Standard optimal disinfection)
  • 7.0 78% 22% HOCl \text{HOCl} HOCl (Dominant) Strong
  • 7.54 ( p K a pK_a p K a ​ ) 50% 50% Equal mixture Moderate (Equilibrium midpoint at 25°C)
  • 8.0 22% 78% OCl − \text{OCl}^- OCl − (Dominant) Reduced (Substantially slower pathogen kill)
  • 8.5 10% 90% OCl − \text{OCl}^- OCl − (Dominant) Low (Requires prolonged contact time / high dose)
  • 9.0 3% 97% OCl − \text{OCl}^- OCl − (Dominant) Very Low (Electrostatic repulsion by cell walls)

Important

Germicidal Efficacy: HOCl vs. OCl⁻ Hypochlorous acid ( H O C l HOCl H OCl ) is 80 to 100 times more potent as a germicide than the hypochlorite ion ( O C l − OCl^- OC l − ) for inactivating bacteria and viruses.

Why? Bacterial and microbial cell walls carry a net negative surface charge. Hypochlorous acid ( H O C l HOCl H OCl ) is an electrically neutral molecule ( H - O - C l H\text{-}O\text{-}Cl H - O - Cl ), allowing it to readily penetrate the cell's lipid bilayer membrane via passive diffusion to oxidize vital intracellular enzyme systems. In contrast, the hypochlorite ion ( O C l − OCl^- OC l − ) carries a negative electrical charge and is electrostatically repelled by the cell wall, severely impeding its penetration rate.

Consequently, chlorination is vastly more effective at lower pH levels (pH 6.5 to 7.2) where H O C l HOCl H OCl predominates than at elevated pH levels (pH > 8.0).

Chlorine Demand Kinetics & Math

When chlorine is introduced into untreated water, it reacts immediately with various chemical constituents before establishing a stable residual.

The Fundamental Chlorine Balance Chlorine Dose (mg/L) = Chlorine Demand (mg/L) + Chlorine Residual (mg/L) \text{Chlorine Dose (mg/L)} = \text{Chlorine Demand (mg/L)} + \text{Chlorine Residual (mg/L)} Chlorine Dose (mg/L) = Chlorine Demand (mg/L) + Chlorine Residual (mg/L) Chlorine Demand (mg/L) = Chlorine Dose (mg/L) − Chlorine Residual (mg/L) \text{Chlorine Demand (mg/L)} = \text{Chlorine Dose (mg/L)} - \text{Chlorine Residual (mg/L)} Chlorine Demand (mg/L) = Chlorine Dose (mg/L) − Chlorine Residual (mg/L) Total Chlorine Residual = Free Available Residual + Combined Available Residual \text{Total Chlorine Residual} = \text{Free Available Residual} + \text{Combined Available Residual} Total Chlorine Residual = Free Available Residual + Combined Available Residual

Chlorine Dose: The total mass concentration of chlorine chemical added to the water stream (expressed in mg/L \text{mg/L} mg/L or ppm \text{ppm} ppm ).

Chlorine Demand: The amount of applied chlorine consumed by reactions with:

Inorganic Reducing Agents: Ferrous iron ( F e 2 + Fe^{2+} F e 2 + ), manganous manganese ( M n 2 + Mn^{2+} M n 2 + ), hydrogen sulfide ( H 2 S H_2S H 2 ​ S ), and nitrite ( N O 2 − NO_2^- N O 2 − ​ ).

Organic Matter: Humic and fulvic natural organic matter (NOM), proteins, amino acids, and cellular debris.

Ammonia and Nitrogenous Compounds: Free ammonia ( N H 3 NH_3 N H 3 ​ ) and organic nitrogen.

Chlorine Residual: The total concentration of active chlorine compounds remaining in the treated water at the end of a specified contact time (measured via DPD colorimetric or amperometric titration methods).

Reactions with Ammonia: Inorganic Chloramine Chemistry

When free chlorine is added to water containing natural dissolved ammonia ( N H 3 NH_3 N H 3 ​ ) or when ammonia is intentionally added in chloramination systems, chlorine reacts in sequential substitution steps to form inorganic chloramines (combined chlorine). Ammonia Present (NH₃)

  • │
  • ▼ + HOCl (pH > 8.0, Cl₂:N < 5:1)
  • Monochloramine (NH₂Cl)
  • │
  • ▼ + HOCl (pH 5.0 - 7.0, Cl₂:N 5:1 to 7.6:1)
  • Dichloramine (NHCl₂)
  • │
  • ▼ + HOCl (pH < 4.5, Cl₂:N > 7.6:1)
  • Trichloramine / Nitrogen Trichloride (NCl₃)

1. Monochloramine ( N H 2 C l NH_2Cl N H 2 ​ Cl ) NH 3 + HOCl ⇌ NH 2 Cl + H 2 O \text{NH}_3 + \text{HOCl} \rightleftharpoons \text{NH}_2\text{Cl} + \text{H}_2\text{O} NH 3 ​ + HOCl ⇌ NH 2 ​ Cl + H 2 ​ O

Formation Conditions: Favored at alkaline pH ( p H > 8.0 pH > 8.0 p H > 8.0 ) and a chlorine-to-ammonia nitrogen ( C l 2 : N H 3 - N Cl_2 : NH_3\text{-}N C l 2 ​ : N H 3 ​ - N ) weight ratio of approximately 3:1 to 5:1 (stoichiometric weight ratio is 5.06:1).

Characteristics: Monochloramine is a relatively stable, weak disinfectant. While slower at killing pathogens than free chlorine (requiring longer contact times), it produces significantly lower concentrations of regulated trihalomethanes (TTHMs) and haloacetic acids (HAA5), does not produce offensive odors, and persists for extended durations in large distribution networks.

2. Dichloramine ( N H C l 2 NHCl_2 N H C l 2 ​ ) NH 2 Cl + HOCl ⇌ NHCl 2 + H 2 O \text{NH}_2\text{Cl} + \text{HOCl} \rightleftharpoons \text{NHCl}_2 + \text{H}_2\text{O} NH 2 ​ Cl + HOCl ⇌ NHCl 2 ​ + H 2 ​ O

Formation Conditions: Formed at intermediate pH ( p H 5.0 to 7.0 pH\ 5.0 \text{ to } 7.0 p H 5.0 to 7.0 ) and elevated C l 2 : N Cl_2 : N C l 2 ​ : N weight ratios between 5:1 and 7.6:1 .

Characteristics: Dichloramine has a strong, pungent, chlorinous odor and taste (often mistaken by consumers as "too much chlorine") and is a respiratory irritant. Operators avoid operating in this regime.

3. Trichloramine / Nitrogen Trichloride ( N C l 3 NCl_3 NC l 3 ​ ) NHCl 2 + HOCl ⇌ NCl 3 + H 2 O \text{NHCl}_2 + \text{HOCl} \rightleftharpoons \text{NCl}_3 + \text{H}_2\text{O} NHCl 2 ​ + HOCl ⇌ NCl 3 ​ + H 2 ​ O

Formation Conditions: Formed under highly acidic conditions ( p H < 4.5 pH < 4.5 p H < 4.5 ) or at very high C l 2 : N Cl_2 : N C l 2 ​ : N weight ratios exceeding 7.6:1 .

Characteristics: Nitrogen trichloride is an extremely volatile, noxious gas that causes severe eye tearing (lachrymator) and acute respiratory irritation. In indoor swimming pools or enclosed treatment headworks, trichloramine volatilization creates severe operational safety hazards.

The Breakpoint Chlorination Curve

The breakpoint chlorination curve illustrates the relationship between the applied chlorine dose and the resulting chlorine residual in water containing oxidizable inorganic compounds, organic matter, and ammonia-nitrogen. The curve is divided into four distinct operating zones. Residual

  • Chlorine
  • (mg/L) │
  • │ Zone 4: Free Chlorine
  • │ (Slope = 1.0)
  • │ /
  • │ Zone 2: /
  • │ Chloramines /
  • │ Peak /
  • │ /\ /
  • │ / \ /
  • │ / \ /
  • │ / \ / <── Breakpoint (Lowest Residual)
  • │ / \ /
  • 0 ──────┴───/──────────\──/───────────────────► Applied Chlorine Dose (mg/L)
  • Zone 1 Zone 3
  • (Inorganic (Chloramine
  • Demand) Destruction)
  • Zone 1: Oxidation of Inorganic Reducing Agents (Initial Demand)

Chemical Mechanism: Chlorine added in this initial stage is immediately reduced to inactive chloride ions ( C l − Cl^- C l − ) by readily oxidizable inorganic substances: ferrous iron ( F e 2 + → F e 3 + Fe^{2+} \rightarrow Fe^{3+} F e 2 + → F e 3 + ), manganese ( M n 2 + → M n O 2 Mn^{2+} \rightarrow MnO_2 M n 2 + → M n O 2 ​ ), sulfides ( H 2 S + 4 C l 2 + 4 H 2 O → H 2 S O 4 + 8 H C l H_2S + 4Cl_2 + 4H_2O \rightarrow H_2SO_4 + 8HCl H 2 ​ S + 4 C l 2 ​ + 4 H 2 ​ O → H 2 ​ S O 4 ​ + 8 H Cl ), and nitrites ( N O 2 − → N O 3 − NO_2^- \rightarrow NO_3^- N O 2 − ​ → N O 3 − ​ ).

Observed Residual: Zero residual is formed. All applied chlorine is consumed satisfy the immediate inorganic chemical demand.

Zone 2: Formation of Chloramines and Organochlorines

Chemical Mechanism: Once inorganic demand is satisfied, added chlorine reacts with ammonia and organic amines to form monochloramine ( N H 2 C l NH_2Cl N H 2 ​ Cl ), dichloramine ( N H C l 2 NHCl_2 N H C l 2 ​ ), and chloro-organic complexes.

Observed Residual: The measured chlorine residual increases proportionally with the applied dose up to a peak. This residual consists almost entirely of Combined Available Chlorine (CAC) .

Peak Point: The peak occurs at a C l 2 : N H 3 - N Cl_2 : NH_3\text{-}N C l 2 ​ : N H 3 ​ - N weight ratio of approximately 5:1 .

Zone 3: Oxidation and Destruction of Chloramines

Chemical Mechanism: As the chlorine dose is increased past the 5:1 ratio, the excess free chlorine reacts with and oxidizes the previously formed chloramines, converting combined nitrogen into nitrogen gas ( N 2 N_2 N 2 ​ ), nitrous oxide ( N 2 O N_2O N 2 ​ O ), and hydrochloric acid: 2 NH 2 Cl + HOCl ⟶ N 2 ↑ + 3 HCl + H 2 O 2\text{NH}_2\text{Cl} + \text{HOCl} \longrightarrow \text{N}_2\uparrow + 3\text{HCl} + \text{H}_2\text{O} 2 NH 2 ​ Cl + HOCl ⟶ N 2 ​ ↑ + 3 HCl + H 2 ​ O

Observed Residual: The measured total chlorine residual decreases sharply despite adding more chlorine chemical. Highly volatile trichloramine ( N C l 3 NCl_3 NC l 3 ​ ) and dichloramine intermediates cause strong odors.

The Breakpoint: The point where the residual curve reaches its absolute lowest level. At the breakpoint, virtually all ammonia-nitrogen and combined chloramines have been oxidized and off-gassed. Stoichiometrically, the breakpoint occurs at a theoretical C l 2 : N H 3 - N Cl_2 : NH_3\text{-}N C l 2 ​ : N H 3 ​ - N weight ratio of 7.6:1 (in actual water systems containing natural organics, the practical ratio is typically 8:1 to 10:1 ).

Zone 4: Free Available Chlorine Residual

Chemical Mechanism: Once the breakpoint is reached and all ammonia is destroyed, any additional chlorine added dissolves as Free Available Chlorine ( H O C l HOCl H OCl and O C l − OCl^- OC l − ).

Observed Residual: The chlorine residual increases in a direct 1:1 linear relationship with the applied dose (the curve rises at a 45-degree angle / slope of 1.0). In this zone, the total residual consists of free available chlorine plus a small baseline of refractory unoxidized organochlorines.

  • Practical Operational Considerations
  • Chloramination vs. Free Chlorination

Free Chlorination (Operating in Zone 4): Provides powerful, rapid disinfection kinetics; effective against viruses and bacteria; controls biofilms. Disadvantage: reacts with natural organic matter (NOM) to form high levels of regulated disinfection byproducts (TTHMs and HAA5).

Chloramination (Operating in Zone 2): Minimizes DBP formation; provides a long-lasting, stable residual across large distribution networks. Disadvantage: weaker disinfectant (ineffective against Cryptosporidium oocysts); susceptible to distribution system nitrification if free ammonia is released.

Nitrification in Chloraminated Distribution Networks

If the C l 2 : N H 3 - N Cl_2 : NH_3\text{-}N C l 2 ​ : N H 3 ​ - N ratio drops below 4:1 (excess free ammonia present), autotrophic ammonia-oxidizing bacteria ( Nitrosomonas ) and nitrite-oxidizing bacteria ( Nitrobacter ) proliferate in storage tanks and dead ends: NH 3 + 1.5 O 2 → Nitrosomonas NO 2 − + H + + H 2 O \text{NH}_3 + 1.5\text{ O}_2 \xrightarrow{\text{Nitrosomonas}} \text{NO}_2^- + \text{H}^+ + \text{H}_2\text{O} NH 3 ​ + 1.5 O 2 ​ Nitrosomonas ​ NO 2 − ​ + H + + H 2 ​ O NO 2 − + 0.5 O 2 → Nitrobacter NO 3 − \text{NO}_2^- + 0.5\text{ O}_2 \xrightarrow{\text{Nitrobacter}} \text{NO}_3^- NO 2 − ​ + 0.5 O 2 ​ Nitrobacter ​ NO 3 − ​

Nitrification symptoms include: rapid loss of total chlorine residual, elevated nitrite ( N O 2 − NO_2^- N O 2 − ​ ) and nitrate ( N O 3 − NO_3^- N O 3 − ​ ) levels, drop in dissolved oxygen (DO), and drop in pH. Corrective action involves increasing the chlorine-to-ammonia ratio, deep tank cycling, distribution line flushing, or conducting a periodic "free chlorine burnout" (temporary conversion to Zone 4 free chlorination).

Loading diagram... Breakpoint Chlorination Curve Zones and Chemical Species

Percentage of Germicidal Hypochlorous Acid (HOCl) vs Solution pH (at 25°C)