Study guide

1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants

California Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Water Regulatory Framework & Certification Ladders

1.1 State Water Board & Regional Boards Structure 1.2 Drinking Water Certification: T1-T5 & D1-D5 Requirements 1.3 Wastewater Certification: Grades I-V & OIT Requirements 1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants 1.5 California Waterworks Standards (Title 22, Chapter 16) 1.6 Public Water System Types, Permits & the Sanitary Survey

2 Chapter 2: California Water Rights, Title 22 & Environmental Policy

2.1 California Title 22 Recycled Water Standards 2.2 California Environmental Quality Act (CEQA) & Proposition 218 2.3 Water Rights & California Water Resources

3 Chapter 3: Drinking Water Source Quality & Coagulation/Flocculation

3.1 Source Water Quality & Watershed Management 3.2 Coagulation Chemistry & Flash Mixing 3.3 Flocculation & Jar Testing 3.4 Wells, Aquifers & Groundwater Hydraulics 3.5 Raw Water Storage, Clearwells & Reservoir Management

4 Chapter 4: Clarification & Granular Media Filtration

4.1 Sedimentation & Advanced Clarification 4.2 Granular Media Filtration Mechanics & Media Types 4.3 Filter Operation, Backwash Cycles & SWTR Compliance

5 Chapter 5: Disinfection, Oxidation & Advanced Water Treatment

5.1 Chlorination Chemistry & Breakpoint Curves 5.2 Disinfection Kinetics & CT Calculations 5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide 5.4 Advanced Treatment: Membranes, AOP & PFAS Adsorption 5.5 Chloramination & Nitrification Control 5.6 Iron & Manganese Removal 5.7 Fluoridation Practice & Compliance 5.8 Corrosion Control Treatment & Water Stability 5.9 Taste & Odor Control and Algal Toxin Management

6 Chapter 6: Wastewater Preliminary & Primary Treatment

6.1 Preliminary Treatment: Screening & Grit Removal 6.2 Primary Clarification Operations 6.3 Primary Sludge Characteristics & Pumping 6.4 Stabilization Ponds, Lagoons & Small-Plant Processes

7 Chapter 7: Secondary Biological Treatment & Activated Sludge

7.1 Activated Sludge Process Fundamentals 7.2 Process Control Parameters: F/M, MCRT & SVI 7.3 Activated Sludge Microbiology & Troubleshooting 7.4 Fixed-Film & Hybrid Biological Processes

8 Chapter 8: Biological Nutrient Removal, Water Reuse & Solids Handling

8.1 Biological Nitrogen Removal: Nitrification & Denitrification 8.2 Biological Phosphorus Removal (EBPR) & Chemical Precipitation 8.3 Anaerobic & Aerobic Digestion 8.4 Sludge Thickening, Dewatering & Biosolids Disposal 8.5 Wastewater Disinfection: Chlorination, Dechlorination & UV

9 Chapter 9: Distribution Systems, Collection Networks & Hydraulics

9.1 Hydraulics, Pressure & Flow Dynamics 9.2 Centrifugal Pumps, Motors & VFDs 9.3 Distribution Network Infrastructure & Cross-Connection Control 9.4 Wastewater Collection Systems, SSMP & FOG Management

10 Chapter 10: Laboratory Analytics, Safety & Water Math

10.1 Water & Wastewater Laboratory Methods 10.2 Laboratory Quality Assurance & Regulatory Reporting 10.3 Chemical Safety, Hazardous Gases & Confined Space 10.4 Essential Water & Wastewater Math for Operators

11 Chapter 11: Federal & California Drinking Water Rules

11.1 The Revised Total Coliform Rule & Assessments 11.2 The Lead and Copper Rule and Service Line Replacement 11.3 Surface Water Treatment Rules & Log Removal Credit 11.4 Stage 1 & Stage 2 Disinfection Byproduct Rules 11.5 Secondary MCLs, Notification Levels & Response Levels 11.6 Public Notification, Consumer Confidence Reports & Recordkeeping

12 Chapter 12: Distribution System Design, Demand & Hydraulics

12.1 System Layout, Pressure Zones & Distribution Maps 12.2 Water Demand, Peaking Factors & Fire Flow 12.3 Distribution Storage: Types, Sizing & Turnover 12.4 Head Loss, C-Factor & Distribution Hydraulic Calculations 12.5 Water Hammer, Surge Control & Air Management

13 Chapter 13: Distribution Equipment Operation, Maintenance & Inspection

13.1 Valves: Types, Operation & Exercising Programs 13.2 Fire Hydrants: Types, Testing & Maintenance 13.3 Water Meters: Types, Accuracy & Meter Management 13.4 Instrumentation, In-Line Sensors, Telemetry & SCADA 13.5 Electrical Systems, Motors & Standby Generators 13.6 External Corrosion, Cathodic Protection & Asset Inspection

14 Chapter 14: Water Mains, Piping & Field Construction

14.1 Pipe Materials & Pipe Selection 14.2 Joints, Fittings, Thrust Restraint & Bedding 14.3 Main Installation, Tapping & Service Line Installation 14.4 Leak Detection, Water Loss Auditing & Main Repair 14.5 Main Cleaning & Maintenance: Flushing, Pigging & Lining 14.6 Excavation, Trench Safety & Utility Locating

15 Chapter 15: Disinfecting Distribution Facilities & Maintaining Water Quality

15.1 Water Main Disinfection (AWWA C651) 15.2 Disinfecting Storage Reservoirs (C652) & Wells (C654) 15.3 Maintaining Distribution Water Quality: Residual, Biofilm & Discolored Water 15.4 Cross-Connection Control Program Administration & Device Testing

16 Chapter 16: Plant Equipment, Chemical Feed & Maintenance

16.1 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 16.2 Gas Chlorination Equipment & Hypochlorite Systems 16.3 Blowers, Compressors & Aeration Equipment 16.4 Flow Measurement Devices: Meters, Weirs & Flumes 16.5 Preventive Maintenance, CMMS & Asset Management

17 Chapter 17: Utility Management, Administration & Emergency Response

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group 17.2 Budgets, Water Rates & Financial Management 17.3 Operator Training, Staffing & Safety Program Development 17.4 Energy Management & Optimization 17.5 Emergency Response Planning, Risk & Resilience & Security 17.6 Water Conservation Planning & Drought Response

18 Chapter 18: Applied Operator Mathematics Workshop

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis 18.2 Distribution & Hydraulic Math Workshop 18.3 Treatment & Wastewater Process Math Workshop

1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants

Key Takeaways Explain This Topic AI

The California Safe Drinking Water Act authorizes the State Water Board to establish Primary Maximum Contaminant Levels (MCLs) that are equal to or more stringent than federal EPA standards.

Primary MCLs are legally enforceable, health-based limits, whereas Secondary MCLs (SMCLs) regulate aesthetic parameters like color, odor, taste, foaming agents, and total dissolved solids (TDS).

Public Health Goals (PHGs) are established by California's Office of Environmental Health Hazard Assessment (OEHHA) based solely on public health risk without considering technical feasibility or economic cost.

Under the Stage 2 Disinfection and Disinfection Byproducts Rule (D/DBPR), compliance for TTHM (80 µg/L) and HAA5 (60 µg/L) is calculated using a Locational Running Annual Average (LRAA) at each discrete monitoring point.

The Lead and Copper Rule (LCR) establishes action levels of 15 µg/L (0.015 mg/L) for lead and 1.3 mg/L for copper, evaluated at the 90th percentile of consumer tap samples.

Last updated: August 2026

Statutory Framework: Federal vs. California Safe Drinking Water Act

Public drinking water supplies are co-regulated by the federal government under the Safe Drinking Water Act (SDWA) of 1974 (amended in 1986 and 1996) and the State of California under the California Safe Drinking Water Act (California Health and Safety Code, Division 104, Part 12, Chapter 4). The State Water Resources Control Board Division of Drinking Water (DDW) administers primacy authority on behalf of the US EPA.

Important

The Strictness Principle: Under state law, California drinking water standards must be at least as stringent as federal US EPA standards . In many cases, California establishes lower numerical limits or regulates emerging contaminants years ahead of federal rulemaking (e.g., hexavalent chromium, perchlorate, 1,2,3-trichloropropane [1,2,3-TCP], and PFAS). Risk Analysis

  • │
  • ▼
  • ┌─────────────────────────────┐
  • │ OEHHA Public Health Goal │
  • │ (PHG) - Zero-Risk Level │
  • │ (Non-Enforceable Target) │
  • └──────────────┬──────────────┘
  • │
  • Consider Treatment Feasibility, Analytical
  • Detection Limits (DLR), and Economic Cost
  • │
  • ▼
  • ┌─────────────────────────────┐
  • │ California Primary MCL │
  • │ (Legally Enforceable Max) │
  • └─────────────────────────────┘
  • The Hierarchy of Drinking Water Quality Limits

Maximum Contaminant Level Goal (MCLG) / Public Health Goal (PHG):

MCLGs are federal targets established by the US EPA; PHGs are California state targets established by the Office of Environmental Health Hazard Assessment (OEHHA) .

Status: Non-enforceable aspirational health goals.

Basis: Calculated exclusively from toxicological and epidemiological risk assessments (representing the concentration in drinking water that poses no significant health risk over a lifetime of exposure). For known carcinogens (e.g., arsenic, benzene, bromate), the PHG is frequently set to zero or near-zero part-per-trillion levels.

Primary Maximum Contaminant Level (Primary MCL):

Status: Legally enforceable regulatory standard .

Basis: Established by DDW as close to the PHG as feasible, taking into account the best available treatment technology (BAT), analytical detection limits for reporting (DLR), and the economic cost of compliance to public water systems.

Secondary Maximum Contaminant Level (Secondary MCL / SMCL):

Status: Enforceable in California for all community water systems.

Basis: Established to protect the aesthetic quality and consumer acceptance of drinking water (preventing objectionable taste, odor, color, staining of laundry/plumbing fixtures, foaming, or excessive mineral scaling).

Master Summary of Major Regulated Contaminants

Contaminant Category Parameter California Primary MCL Federal Primary MCL Common Sources & Health / Operational Significance

Inorganic Chemicals (IOCs) Nitrate (as N) 10 mg/L 10 mg/L Agricultural fertilizer runoff, septic leachate. Causes infant methemoglobinemia ( "blue baby syndrome" ). (Note: 10 mg/L as N = 45 mg/L as NO₃).

Nitrite (as N) 1.0 mg/L 1.0 mg/L Intermediate nitrification byproduct; rapid biological oxidation to nitrate.

Arsenic 0.010 mg/L (10 µg/L) 0.010 mg/L Natural geological deposits. Human carcinogen (skin, bladder, lung cancers).

Perchlorate 6 µg/L (0.006 mg/L) Not Federally Regulated Solid rocket propellant, pyrotechnics. Disrupts thyroid hormone production.

Fluoride 2.0 mg/L 4.0 mg/L Added for dental health or natural mineral deposits. Skeletal fluorosis risk above 2.0 mg/L in CA.

Organic Chemicals (VOCs/SOCs) 1,2,3-Trichloropropane (1,2,3-TCP) 0.005 µg/L (5 ppt) Not Federally Regulated Industrial solvent, soil fumigant. Potent genotoxic carcinogen.

Benzene 1.0 µg/L 5.0 µg/L Petroleum refining, leaking fuel tanks. Known human carcinogen (leukemia).

Trichloroethylene (TCE) 5.0 µg/L 5.0 µg/L Industrial metal degreasing solvent. Liver, kidney, and immune system toxicity.

Microbiological E. coli MCL Violation (Zero) MCL Violation (Zero) Fecal contamination indicator; gastrointestinal illness, acute diarrhea, hemolytic uremic syndrome.

Turbidity (Surface Water) ≤ 0.3 NTU in 95% samples; Max 1.0 NTU Same Granular filtration performance standard. Protects against microbial shielding from disinfectants.

Secondary Maximum Contaminant Levels (SMCLs)

Under Title 22 CCR §64449, California community water systems must monitor for secondary contaminants. For total dissolved solids and specific conductance, California utilizes a three-tier standard (Recommended, Upper, and Short-Term limits):

Secondary Parameter Recommended Limit Upper Limit Short-Term Limit Aesthetic Impact / Consumer Concern

Total Dissolved Solids (TDS) 500 mg/L 1,000 mg/L 1,500 mg/L Mineralized taste, pipe scaling, appliance damage.

Specific Conductance (EC) 900 µS/cm 1,600 µS/cm 2,200 µS/cm Electrical conductivity proxy for dissolved mineral ions.

Chloride (Cl⁻) 250 mg/L 500 mg/L 600 mg/L Salty taste, increased corrosion of copper/galvanized pipes.

Sulfate (SO₄²⁻) 250 mg/L 500 mg/L 600 mg/L Bitter taste, laxative effect in unacclimated consumers.

Iron (Fe) 0.3 mg/L (300 µg/L) — — Red/brown water, staining of plumbing fixtures and laundry.

Manganese (Mn) 0.05 mg/L (50 µg/L) — — Black precipitates, bitter metallic taste, staining.

Color 15 Apparent Units — — Yellow/brown discoloration from natural tannins/iron.

Odor 3 Threshold Odor No. (TON) — — Earthy, musty, or chemical odors (geosmin / MIB).

Foaming Agents (MBAS) 0.5 mg/L — — Detergent residues creating visible froth and foam.

Disinfection and Disinfection Byproducts Rules (Stage 1 & Stage 2 D/DBPR)

When chemical disinfectants (primarily free chlorine) react with naturally occurring organic matter (Total Organic Carbon / TOC) in raw surface water, they produce Disinfection Byproducts (DBPs) linked to bladder cancer and reproductive harm. Disinfectant Dose Raw Water NOM Disinfection Byproducts

  • ┌──────────────────────┐ ┌─────────────────────┐ ┌───────────────────────┐
  • │ Free Chlorine │ + │ Natural Organic │ ──────► │ TTHM (MCL = 80 µg/L) │
  • │ (HOCl / OCl-) │ │ Matter (NOM / TOC) │ │ HAA5 (MCL = 60 µg/L) │
  • └──────────────────────┘ └─────────────────────┘ └───────────────────────┘
  • Maximum Residual Disinfectant Levels (MRDLs)
  • Chlorine (Free): MRDL = 4.0 mg/L (Running Annual Average)
  • Chloramines (Combined): MRDL = 4.0 mg/L (Running Annual Average)
  • Chlorine Dioxide (ClO₂): MRDL = 0.8 mg/L (Daily monitoring at plant point of entry)
  • Regulated Disinfection Byproduct Limits

Total Trihalomethanes (TTHM): MCL = 0.080 mg/L (80 µg/L) . Sum of chloroform, bromoform, bromodichloromethane, and dibromochloromethane.

Haloacetic Acids (HAA5): MCL = 0.060 mg/L (60 µg/L) . Sum of monochloroacetic, dichloroacetic, trichloroacetic, monobromoacetic, and dibromoacetic acids.

Bromate (BrO₃⁻): MCL = 0.010 mg/L (10 µg/L) (Formed when ozone reacts with raw water bromide).

Chlorite (ClO₂⁻): MCL = 1.0 mg/L (Byproduct of chlorine dioxide disinfection).

Compliance Calculation: The LRAA Framework

Under the Stage 2 D/DBPR , compliance is calculated using the Locational Running Annual Average (LRAA) : LRAA = Q 1 + Q 2 + Q 3 + Q 4 4 \text{LRAA} = \frac{\text{Q}_1 + \text{Q}_2 + \text{Q}_3 + \text{Q}_4}{4} LRAA = 4 Q 1 ​ + Q 2 ​ + Q 3 ​ + Q 4 ​ ​

Warning

Stage 1 RAA vs. Stage 2 LRAA: Under the obsolete Stage 1 Rule, utilities averaged results across all monitoring sites system-wide (Running Annual Average). Under Stage 2, each individual monitoring location must independently maintain an LRAA ≤ 80 µg/L for TTHM and ≤ 60 µg/L for HAA5 . An exceedance at even one high-water-age sampling point constitutes a non-compliant Primary MCL violation.

Lead and Copper Rule (LCR) & 90th Percentile Action Levels

Lead and copper enter drinking water primarily through the corrosion of interior plumbing materials, lead service lines (LSLs), and brass fixtures rather than source water contamination. Consequently, the Lead and Copper Rule regulates these metals through Action Levels (ALs) rather than traditional plant-effluent MCLs.

  • Action Levels & Monitoring Protocol
  • Lead Action Level: 0.015 mg/L (15 µg/L / 15 ppb)
  • Copper Action Level: 1.3 mg/L (1,300 µg/L / 1.3 ppm)

Sampling Protocol: Requires first-draw 1-liter tap samples collected after water has stood motionless in customer plumbing for a minimum of 6 hours (stagnation period). 90th Percentile Concentration = Value at Rank ( 0.90 × N ) \text{90th Percentile Concentration} = \text{Value at Rank } (0.90 \times N) 90th Percentile Concentration = Value at Rank ( 0.90 × N )

(where N is the total number of valid compliance tap samples sorted in ascending order).

Mandatory Triggers upon Action Level Exceedance

If the 90th percentile concentration exceeds 15 ppb lead or 1.3 ppm copper , the utility has not committed an immediate violation of an MCL, but is legally mandated to execute specific corrective actions:

Water Quality Parameter (WQP) Monitoring: Intensive monitoring of pH, alkalinity, calcium, conductivity, and orthophosphate throughout the distribution network.

Corrosion Control Treatment (CCT): Installation or optimization of CCT (e.g., raising pH/alkalinity to form calcium carbonate scale or dosing zinc orthophosphate inhibitor).

Public Education (PE): Delivering mandatory lead public education notices to all consumers, schools, and healthcare facilities within 60 days .

Lead Service Line Replacement (LSLR): Implementing mandatory annual lead service line inventory and replacement programs.

Revised Total Coliform Rule (RTCR): "Find and Fix" Framework

The Revised Total Coliform Rule (RTCR) treats total coliform bacteria as an operational indicator of distribution integrity, vulnerability, or potential pathogen pathways rather than an acute health threat, replacing the old total coliform MCL with a "Find and Fix" assessment protocol . Routine Distribution Sample

  • │
  • ▼

Total Coliform Positive?

  • / \
  • YES / \ NO
  • ▼ ▼
  • Collect 3 Repeat Samples In Compliance
  • + E. coli Lab Test
  • │
  • ┌─────────────────┴─────────────────┐
  • │ │
  • ▼ ▼
  • E. coli Positive Total Coliform Only
  • │ │

ACUTE PRIMARY MCL VIOLATION Assess Trigger Criteria:

  • Tier 1 Public Notice (24 Hr) - >5.0% Positives (>=40 samples)
  • Level 2 Assessment Mandatory - >=2 Positives (<40 samples)
  • │
  • LEVEL 1 ASSESSMENT TRIGGERED
  • Coliform Compliance Rules & Assessments

Acute E. coli Primary MCL Violation: Triggered if:

An E. coli -positive repeat sample follows a total coliform-positive routine sample.

A total coliform-positive repeat sample follows an E. coli -positive routine sample.

A utility fails to collect all required repeat samples following an E. coli -positive routine sample.

Mandatory Action: Tier 1 Public Notification (Boil Water Advisory within 24 hours) and a mandatory Level 2 Assessment .

Level 1 Assessment: Triggered by operational vulnerabilities (e.g., >5.0% total coliform positive samples in a month for systems collecting ≥40 samples/month, or ≥2 positive samples for small systems). Conducted by the utility operator to inspect storage tanks, booster stations, main breaks, and sampling taps.

Level 2 Assessment: Triggered by an E. coli MCL violation or a second Level 1 assessment trigger within a rolling 12-month window . A comprehensive sanitary investigation conducted by DDW staff or a DDW-approved certified third party.

  • California Emerging Contaminants: PFAS & Hexavalent Chromium
  • 1. Per- and Polyfluoroalkyl Substances (PFAS)

PFAS are synthetic organofluorine chemical compounds ( "forever chemicals" ) containing strong carbon-fluorine bonds, historically used in firefighting foams (AFFF), non-stick cookware, waterproof textiles, and industrial plating. California regulates two primary advisory tiers:

Notification Level (NL): Health-based advisory level that triggers mandatory written notification to the utility's governing body (city council / board of directors) within 30 days.

  • PFOA (Perfluorooctanoic acid) NL: 5.1 ng/L (ppt)
  • PFOS (Perfluorooctanesulfonic acid) NL: 6.5 ng/L (ppt)

Response Level (RL): Advisory level at which DDW strongly recommends taking the contaminated drinking water well off-line or installing advanced treatment.

  • PFOA RL: 10 ng/L (ppt)
  • PFOS RL: 40 ng/L (ppt)

Note: In 2024, the US EPA promulgated National Primary Drinking Water Regulations establishing enforceable federal Primary MCLs of 4.0 ppt for PFOA and PFOS , which California utilities must achieve within the federal multi-year compliance schedule.

2. Hexavalent Chromium (Chromium-6 / Cr-VI)

While total chromium has a California Primary MCL of 50 µg/L (stricter than the federal 100 µg/L limit), California established a dedicated state Primary MCL for Hexavalent Chromium of 10 µg/L (10 ppb) , reflecting OEHHA's carcinogenic risk assessments. Water systems must comply through granular activated carbon, ion exchange (strong base or weak base), or reduction-coagulation-filtration (RCF) treatment.

Loading diagram... California Drinking Water Regulatory Limits & Emerging Contaminant Framework