Study guide

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group

California Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: California Water Regulatory Framework & Certification Ladders

1.1 State Water Board & Regional Boards Structure 1.2 Drinking Water Certification: T1-T5 & D1-D5 Requirements 1.3 Wastewater Certification: Grades I-V & OIT Requirements 1.4 Safe Drinking Water Standards, MCLs & Emerging Contaminants 1.5 California Waterworks Standards (Title 22, Chapter 16) 1.6 Public Water System Types, Permits & the Sanitary Survey

2 Chapter 2: California Water Rights, Title 22 & Environmental Policy

2.1 California Title 22 Recycled Water Standards 2.2 California Environmental Quality Act (CEQA) & Proposition 218 2.3 Water Rights & California Water Resources

3 Chapter 3: Drinking Water Source Quality & Coagulation/Flocculation

3.1 Source Water Quality & Watershed Management 3.2 Coagulation Chemistry & Flash Mixing 3.3 Flocculation & Jar Testing 3.4 Wells, Aquifers & Groundwater Hydraulics 3.5 Raw Water Storage, Clearwells & Reservoir Management

4 Chapter 4: Clarification & Granular Media Filtration

4.1 Sedimentation & Advanced Clarification 4.2 Granular Media Filtration Mechanics & Media Types 4.3 Filter Operation, Backwash Cycles & SWTR Compliance

5 Chapter 5: Disinfection, Oxidation & Advanced Water Treatment

5.1 Chlorination Chemistry & Breakpoint Curves 5.2 Disinfection Kinetics & CT Calculations 5.3 Alternative Disinfection: Ozone, UV & Chlorine Dioxide 5.4 Advanced Treatment: Membranes, AOP & PFAS Adsorption 5.5 Chloramination & Nitrification Control 5.6 Iron & Manganese Removal 5.7 Fluoridation Practice & Compliance 5.8 Corrosion Control Treatment & Water Stability 5.9 Taste & Odor Control and Algal Toxin Management

6 Chapter 6: Wastewater Preliminary & Primary Treatment

6.1 Preliminary Treatment: Screening & Grit Removal 6.2 Primary Clarification Operations 6.3 Primary Sludge Characteristics & Pumping 6.4 Stabilization Ponds, Lagoons & Small-Plant Processes

7 Chapter 7: Secondary Biological Treatment & Activated Sludge

7.1 Activated Sludge Process Fundamentals 7.2 Process Control Parameters: F/M, MCRT & SVI 7.3 Activated Sludge Microbiology & Troubleshooting 7.4 Fixed-Film & Hybrid Biological Processes

8 Chapter 8: Biological Nutrient Removal, Water Reuse & Solids Handling

8.1 Biological Nitrogen Removal: Nitrification & Denitrification 8.2 Biological Phosphorus Removal (EBPR) & Chemical Precipitation 8.3 Anaerobic & Aerobic Digestion 8.4 Sludge Thickening, Dewatering & Biosolids Disposal 8.5 Wastewater Disinfection: Chlorination, Dechlorination & UV

9 Chapter 9: Distribution Systems, Collection Networks & Hydraulics

9.1 Hydraulics, Pressure & Flow Dynamics 9.2 Centrifugal Pumps, Motors & VFDs 9.3 Distribution Network Infrastructure & Cross-Connection Control 9.4 Wastewater Collection Systems, SSMP & FOG Management

10 Chapter 10: Laboratory Analytics, Safety & Water Math

10.1 Water & Wastewater Laboratory Methods 10.2 Laboratory Quality Assurance & Regulatory Reporting 10.3 Chemical Safety, Hazardous Gases & Confined Space 10.4 Essential Water & Wastewater Math for Operators

11 Chapter 11: Federal & California Drinking Water Rules

11.1 The Revised Total Coliform Rule & Assessments 11.2 The Lead and Copper Rule and Service Line Replacement 11.3 Surface Water Treatment Rules & Log Removal Credit 11.4 Stage 1 & Stage 2 Disinfection Byproduct Rules 11.5 Secondary MCLs, Notification Levels & Response Levels 11.6 Public Notification, Consumer Confidence Reports & Recordkeeping

12 Chapter 12: Distribution System Design, Demand & Hydraulics

12.1 System Layout, Pressure Zones & Distribution Maps 12.2 Water Demand, Peaking Factors & Fire Flow 12.3 Distribution Storage: Types, Sizing & Turnover 12.4 Head Loss, C-Factor & Distribution Hydraulic Calculations 12.5 Water Hammer, Surge Control & Air Management

13 Chapter 13: Distribution Equipment Operation, Maintenance & Inspection

13.1 Valves: Types, Operation & Exercising Programs 13.2 Fire Hydrants: Types, Testing & Maintenance 13.3 Water Meters: Types, Accuracy & Meter Management 13.4 Instrumentation, In-Line Sensors, Telemetry & SCADA 13.5 Electrical Systems, Motors & Standby Generators 13.6 External Corrosion, Cathodic Protection & Asset Inspection

14 Chapter 14: Water Mains, Piping & Field Construction

14.1 Pipe Materials & Pipe Selection 14.2 Joints, Fittings, Thrust Restraint & Bedding 14.3 Main Installation, Tapping & Service Line Installation 14.4 Leak Detection, Water Loss Auditing & Main Repair 14.5 Main Cleaning & Maintenance: Flushing, Pigging & Lining 14.6 Excavation, Trench Safety & Utility Locating

15 Chapter 15: Disinfecting Distribution Facilities & Maintaining Water Quality

15.1 Water Main Disinfection (AWWA C651) 15.2 Disinfecting Storage Reservoirs (C652) & Wells (C654) 15.3 Maintaining Distribution Water Quality: Residual, Biofilm & Discolored Water 15.4 Cross-Connection Control Program Administration & Device Testing

16 Chapter 16: Plant Equipment, Chemical Feed & Maintenance

16.1 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 16.2 Gas Chlorination Equipment & Hypochlorite Systems 16.3 Blowers, Compressors & Aeration Equipment 16.4 Flow Measurement Devices: Meters, Weirs & Flumes 16.5 Preventive Maintenance, CMMS & Asset Management

17 Chapter 17: Utility Management, Administration & Emergency Response

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group 17.2 Budgets, Water Rates & Financial Management 17.3 Operator Training, Staffing & Safety Program Development 17.4 Energy Management & Optimization 17.5 Emergency Response Planning, Risk & Resilience & Security 17.6 Water Conservation Planning & Drought Response

18 Chapter 18: Applied Operator Mathematics Workshop

18.1 The Exam Conversion Sheet, Units & Dimensional Analysis 18.2 Distribution & Hydraulic Math Workshop 18.3 Treatment & Wastewater Process Math Workshop

17.1 Planning, Organizing, Directing & Controlling a Utility Work Group

Key Takeaways Explain This Topic AI

Planning, Organizing, Directing, Controlling, and Implementing Regulations are five separate named sub-topics in the SWRCB treatment Expected Range of Knowledge Safety/Regulations/Administrative Duties category.

Administer Compliance and Budgets and Future Planning are named sub-topics in the distribution Regulations/Management/Safety category, which carries 35 questions at D4 and 45 at D5.

23 CCR 3701(c)(2) puts basic supervision into the Grade II wastewater blueprint and 3701(c)(4) puts supervision and management into Grade IV.

Management content is weighted toward the upper grades because a T4, D4, D5, or Grade IV or V operator is expected to run a facility, not just a shift.

The T5 oral examination devotes two of its six questions to utility management and emergency situations.

Last updated: September 2026

Why Management Weight Climbs With Grade

Look at how the blueprints shift:

  • Content category T1 T2 T3 T4
  • Safety / Regulations / Administrative Duties 15 15 15 35
  • Content category D1 D2 D3 D4 D5
  • Drinking Water Regulations / Management / Safety 15 10 15 35 45

At D5, 45 percent of the exam is regulations, management, and safety. Meanwhile the technical categories shrink - Water Mains and Piping falls from 20 questions at D1 to 5 questions at D5 . The exam is explicitly testing a different job.

The wastewater regulation says the same thing in words. 23 CCR 3701(c)(2) adds "basic supervision responsibilities" at Grade II. 3701(c)(4) adds at Grade IV: "supervision and management responsibilities including energy management, safety program development and control, operator training, and budget development and control." And the T5 oral examination devotes two of its six questions to utility management and emergency situations, with the instruction that the candidate should "have a general knowledge of policies and procedures related to supervising and managing a work group" and be able to "deal with sensitive personnel issues without compromising or putting public health at risk."

The Four Functions

The treatment blueprint lists Planning, Organizing, Directing, Controlling , and Implementing Regulations as separate sub-topics. That is the classic management framework, and it maps cleanly onto utility work.

Planning

Deciding what will be done and how .

Horizon Product

Strategic (5-20 years) Master plan, capital improvement plan, urban water management plan, asset management plan

  • Tactical (1-3 years) Annual budget, staffing plan, regulatory compliance schedule, training plan
  • Operational (daily to monthly) Work schedules, maintenance schedules, sampling schedules, shutdown plans
  • Contingency Emergency response plan, water shortage contingency plan, succession plan

Future Planning is a named distribution sub-topic. In California it has specific statutory forms: the Urban Water Management Plan (required every five years of urban water suppliers), the Water Shortage Contingency Plan , the Risk and Resilience Assessment and Emergency Response Plan under the America's Water Infrastructure Act, and the Sewer System Management Plan on the wastewater side.

Organizing

Arranging people, equipment, and money to execute the plan: the organization chart, job descriptions, shift coverage, the split between operations and maintenance, contracting versus in-house work, and inventory.

A California operator organization has one structural feature written into regulation: the chief plant operator (drinking water) or chief plant operator and designated operator-in-charge (wastewater) are legally defined positions with grade requirements , not just job titles. Section 63765 and 63770 set them for drinking water; 23 CCR 3680 sets them for wastewater, along with the rule that at Class IV and V wastewater plants at least 50 percent of operators must hold Grade II or higher .

Directing

Day-to-day leadership: assigning work, giving clear instruction, coaching, motivating, and handling conflict and discipline.

Practices that hold up under scrutiny:

Give the why, not just the what. An operator who understands that a filter is being taken to waste for four hours because of the IESWTR ripening trigger will make better decisions at 3 a.m. than one who was told to "flip the valve."

Document performance contemporaneously , both good and bad. A discipline action supported only by memory does not survive a grievance.

Address performance problems early and privately ; praise publicly.

Never direct a violation. An operator instructed to falsify a log, run below the required grade, or bypass a safety interlock has a duty to refuse, and the supervisor who gave the instruction has committed grounds for certificate revocation.

Controlling

Measuring results against the plan and correcting variance. In a utility that means:

Compliance monitoring - are we meeting MCLs, treatment techniques, permit limits, and reporting deadlines?

  • Performance measurement - the metrics below
  • Budget variance - actual versus budgeted, month over month
  • Audits and inspections - sanitary surveys, safety inspections, internal reviews
  • Corrective action tracking - findings closed, not just found
  • Implementing Regulations

The bridge function: turning a rule into a procedure. When the LCRI lowers the lead action level to 0.010 mg/L effective November 1, 2027, someone has to translate that into a revised sample siting plan, a revised sampling schedule, a corrosion control re-evaluation, an inventory validation program, and a customer notification workflow. That translation is the management task the exam is testing.

Standard Operating Procedures

An SOP turns knowledge in one person's head into an organizational asset. A usable SOP states the purpose , the scope , the hazards and required PPE , the lockout points , the step sequence with acceptance criteria , what to do when it does not work , the records to complete , and the review date .

The test of an SOP is whether a competent operator who has never done the task can perform it correctly at 2 a.m. with no one to ask. SOPs are also what make succession survivable - the California water workforce has a well-documented retirement wave, and a utility whose knowledge lives only in senior operators' heads is one retirement away from a compliance problem.

Performance Measurement

Domain Useful measures

Compliance MCL and treatment technique violations; monitoring and reporting violations; sanitary survey findings; permit exceedances

Water quality Residual at the far end; discolored water complaints per 1,000 customers; taste and odor complaints; HPC trend

Reliability Unplanned outages; customers-hours out of service; main breaks per 100 miles per year; pump availability

Efficiency kWh per million gallons; chemical cost per million gallons; real losses per service connection per day

Maintenance PM compliance; emergency work percentage; backlog in crew-weeks; valves exercised on schedule

Safety Recordable injury rate; near-miss reports ( a rising near-miss count is usually a good sign - it means people are reporting)

Workforce Vacancy rate; percentage of positions with a qualified backup; certifications above the minimum required

Tip

Measure what you intend to manage, and know which way "good" points. A falling number of near-miss reports usually means reporting has stopped, not that the workplace got safer. A falling percentage of non-revenue water during a drought usually means sales fell, not that leakage fell. Choose measures that are hard to game.

Communicating Upward and Outward

Operators at the upper grades brief city councils, boards of directors, regulators, and the press. The T5 oral exam explicitly requires the candidate to deal with "the public," "the press," and "the regulators - federal, state, county, and local."

Audience What they need

Governing body The decision being asked for, the options, the cost, the risk of not acting, and the regulatory driver - in plain language, on one page

Regulator Facts, timelines, what you have already done, and what you will do by when. Self-report early ; a violation the regulator learns about from you is a very different conversation than one they discover

Public and press What happened, whether the water is safe, what to do, when it will be resolved, and who to call. Say what you know, say what you do not know, and say when you will know more

Staff Context, priorities, and the reason behind the direction

Important

In an emergency, the operator is often the most credible voice the utility has. Public trust is built before the event, through consistent Consumer Confidence Reports, visible maintenance, and honest communication about routine work like flushing. A utility that has never talked to its customers has no credibility on the day it needs to ask them to boil their water.