Study guide
10.2 Leg, Knee & Patella
CAMRT National Certification Exam — Radiological Technology Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts, Format & Scoring 1.2 Competency-Based Study Strategy & How to Use This Guide
2 Professional, Communicator & Collaborator Roles
2.1 Legal Requirements, Privacy & Informed Consent 2.2 Ethics, Integrity, Boundaries & Cultural Safety 2.3 Communication, Documentation & Collaboration
3 Care Provider: Safety & Assessment
3.1 Patient Identity, Transfer & Immobilization 3.2 History Review, Contraindications & Monitoring 3.3 Medical Emergencies & Patient Interventions
4 Care Provider: Infection Control & Education
4.1 Infection Prevention, Control & Sharps 4.2 Patient Education & Support
5 Radiation Safety (RTR.1)
5.1 ALARA, Time, Distance & Shielding 5.2 Radiation Effects, Risks & Dose Quantities 5.3 Personal Dosimetry & Protective Apparel 5.4 Facility Emergencies & Safe Work Environment
6 Radiation Physics & Imaging Systems (RTR.2)
6.1 X-ray Production & Interactions with Matter 6.2 Operating Imaging Systems & Accessory Equipment 6.3 Grids, Collimation, AEC & Exposure Control 6.4 QC Programs, PACS & Reject/Repeat Analysis
7 Clinical Principles (RTR.3)
7.1 Relational Anatomy & Physiology for Imaging 7.2 Pathophysiology Essentials for Radiographers 7.3 Imaging Protocols, Environments & Other Modalities
8 Positioning Fundamentals & Chest Radiography
8.1 Positioning Terminology, Landmarks & Alignment 8.2 Chest & Thorax Radiography 8.3 Ribs, Sternum & Soft-Tissue Neck
9 Upper Extremity Radiography
9.1 Hand, Wrist & Forearm 9.2 Elbow & Humerus 9.3 Shoulder Girdle
10 Lower Extremity & Pelvis Radiography
10.1 Foot, Toes & Ankle 10.2 Leg, Knee & Patella 10.3 Femur & Hip 10.4 Pelvis & SI Joints
11 Spine & Skull Radiography
11.1 Cervical Spine 11.2 Thoracic & Lumbar Spine, Sacrum & Coccyx 11.3 Skull, Facial Bones, Sinuses & Mandible
12 Abdomen & Contrast Studies
12.1 Abdomen & Acute Abdominal Series 12.2 Gastrointestinal Contrast Studies 12.3 Urinary System Contrast Studies
13 Special Procedures & Modalities
13.1 Mobile, Operating Room & Trauma Radiography 13.2 Fluoroscopy & Interventional Overview 13.3 CT, BMD & Mammography Overview
14 Contrast Media & Pharmaceuticals (RTR.5)
14.1 Venipuncture & Pharmaceutical Agents 14.2 Contrast Media: Types, Effects & Routes 14.3 Adverse Reactions & Emergency Response
15 Image Quality Fundamentals (RTR.6)
15.1 Brightness, Density & Receptor Exposure 15.2 Radiographic Contrast 15.3 Spatial Resolution & Distortion 15.4 Exposure Factors & Technical Evaluation
16 Image Critique & Pathology Recognition
16.1 Anatomy Recognition & Normal Variants 16.2 High-Weight Pathologies: Respiratory & Skeletal 16.3 Artifacts, Markers & Annotation 16.4 Repeat Decisions & Post-Processing
10.2 Leg, Knee & Patella
Key Takeaways Explain This Topic AI
Tibia-fibula AP and lateral must include both ankle and knee joints when possible; true AP shows slight proximal tibiofibular overlap and a free distal fibula laterally.
Knee AP is centered 1–2 cm distal to the patellar apex (through the femorotibial joint); lateral uses 5–7° cephalad CR angle with 20–30° flexion and superimposed femoral condyles.
Medial and lateral knee obliques demonstrate the proximal tibiofibular joint or the medial/lateral femoral condyles and tibial plateaus depending on rotation direction.
Intercondylar fossa (tunnel) projections—Camp-Coventry, Holmblad, or Béclère concepts—open the notch and free the tibial spines for loose bodies and notch morphology.
Patella PA (or AP if needed), lateral, and tangential (Merchant, Settegast, or Hughston-type) evaluate the patellofemoral joint; cross-table lateral is preferred for trauma when flexion for skyline views is unsafe.
Last updated: July 2026
10.2 Leg, Knee & Patella
Quick Answer: The leg needs AP and true lateral that include both knee and ankle whenever the patient and field size allow. The knee routine is AP, lateral, and often both obliques ; tunnel (intercondylar fossa) views free the notch and spines; the patella needs PA (preferred), lateral, and tangential (Merchant/Settegast-type) for the patellofemoral joint. Trauma knees get a cross-table lateral before any forced flexion. CAMRT stems link positioning errors to missed plateau fractures, joint effusions, and patellar tracking problems.
General radiography — skeletal (leg and knee) is high-volume general radiography content under RTR.4 and is tightly coupled to RTR.6 image analysis. You must know centering landmarks, rotation criteria, and when special projections add diagnostic value without unnecessary dose.
Anatomy Landmarks for Positioning
Femoral epicondyles / condyles: AP equality of condyles = no rotation; lateral requires superimposed condyles.
Tibial plateaus and spines: joint-space profile depends on CR angle matching the plateau tilt.
Patella: sits in the trochlear groove; lateral shows height and joint effusion (suprapatellar bursa); tangential shows medial/lateral facets and sulcus.
Proximal tibiofibular joint: opens on medial oblique of the knee (leg rotated medially ~45°).
Fibular head and neck: common occult fracture site after twisting trauma—include on proximal tib-fib and knee series as indicated.
Tibia and Fibula (Lower Leg)
Projection Setup CR Evaluation
AP Leg extended; femoral condyles equidistant from IR; foot dorsiflexed vertical Mid-shaft of tibia (include both joints or two centered images) Ankle and knee included when possible; slight proximal fibular overlap on tibia normal; distal fibula free laterally; no rotation of malleoli/condyles
Lateral True lateral; patella perpendicular to IR; condyles superimposed Mid-shaft Superimposed femoral condyles; tibia and fibula largely superimposed with fibula posterior; both joints included
Field-size reality: Adult tib-fib often requires two images (proximal and distal) with overlap so no shaft segment is missed. Never crop out a joint when the clinical question is “rule out fracture”—missed joint-including segments are a classic reject/repeat driver.
For trauma with angulation, obtain two projections as close to 90° apart as the limb allows; do not forcibly straighten a deformed leg. Support with sponges and use horizontal-beam laterals.
Knee — Routine Projections
Projection Setup CR Evaluation
AP (or PA) Supine/seated; leg extended; epicondyles parallel to IR Perpendicular (or 3–5° cephalad if needed) 1–2 cm distal to patellar apex (through joint) Open femorotibial joint; symmetric femoral condyles; half of fibular head superimposed by tibia; patella centered on distal femur
Lateral (mediolateral) Lateral recumbent; 20–30° knee flexion ; epicondyles perpendicular 5–7° cephalad to the joint (1 cm distal to medial epicondyle) Superimposed femoral condyles ; open patellofemoral joint; slight fibular head superimposition on tibia; soft-tissue suprapatellar effusion assessable
AP medial oblique (~45°) Entire leg rotated medially 45° Joint line Proximal tibiofibular joint open ; lateral femoral condyle and plateau demonstrated
AP lateral oblique (~45°) Entire leg rotated laterally 45° Joint line Medial femoral condyle and medial plateau; fibula superimposed on tibia
Why 20–30° flexion and a cephalad angle on the lateral?
Slight flexion relaxes the muscles and opens the patellofemoral relationship without drawing the patella tightly into the notch. A 5–7° cephalad CR angle compensates for the medial condyle’s slightly inferior position so the condyles superimpose. Under-flexion or wrong CR angle projects one condyle superior to the other—a rotation/angulation error that can hide plateau step-off.
Weight-bearing AP (and PA axial Rosenberg-type) bilateral knees assess joint-space narrowing under load for osteoarthritis pathways. Non–weight-bearing AP is standard for acute trauma and non-ambulatory patients.
Intercondylar Fossa (Tunnel) Projections
Tunnel views demonstrate the intercondylar notch , tibial spines , and loose bodies that hide on routine AP/lateral.
Method (concept) Patient position CR idea Goal
Camp-Coventry (PA axial) Prone; knee flexed 40–50° ; foot supported Angle caudad to match flexion (e.g., 40° caudad for 40° flexion), entering popliteal crease Open notch; spines free; intercondylar eminence profiled
Holmblad (PA axial) Kneeling on IR or partially standing with femur 70° to IR Perpendicular to lower leg / IR through crease Same notch demonstration with less CR angle dependence
Béclère (AP axial) Supine; knee flexed 40–45° ; IR under knee Perpendicular to lower leg, entering 1–2 cm distal to patellar apex Alternative when prone methods are not feasible
Know the concept : flex the knee, direct the CR perpendicular to the lower leg (or angled to match), and open the fossa without excessive condylar rotation. Exact departmental names vary; competency is matching flexion and CR so the notch is clear and spines are not obscured.
Patella
Projection Setup CR Evaluation
PA (preferred) Prone; patella parallel to IR (slight lateral rotation of heel often ~5–10°) Perpendicular to mid-patella Sharp patellar cortex; no rotation; femorotibial joint may be included per protocol
Lateral True lateral; 5–10° flexion only for non-trauma patella series when possible Mid-patellofemoral joint Patella in profile; joint spaces open; assess alta/baja and effusion
Tangential (Merchant) Supine; knees flexed ~45° over table end; IR held against shins/perpendicular setup per device Angled ~30° from horizontal caudad to patellofemoral joints (device-dependent) Bilateral sulcus and medial/lateral facet relationships; subluxation assessment
Tangential (Settegast) Prone or seated; knee flexed ≥90°; patient holds IR Angled 15–20° to joint (perpendicular to space) Patella free of femur; sulcus visible— contraindicated if transverse patellar fracture suspected until fracture ruled out
Hughston and other inferosuperior/superoinferior skyline variants follow the same idea: beam tangent to the patellofemoral joint. Choose the method the department stocks equipment for and that the patient’s flexion tolerance allows.
Trauma rule for the patella and knee
If transverse patellar fracture or acute hemarthrosis is possible, obtain AP (or PA) and cross-table lateral first. Do not force deep flexion for Settegast or other high-flexion skylines until fracture is excluded—flexion can distract fragments. Merchant devices use moderate flexion and may still be inappropriate in acute unstable trauma; follow protocol and clinical guidance.
Cross-Table Lateral Trauma Knee
For stretcher and acute injury patients:
Leave the leg as found; support with sponges.
Place IR vertically against the medial or lateral aspect of the knee (grid if required by part thickness/technique).
Direct a horizontal beam through the joint, matching cephalad angle principles when possible for condyle superimposition.
Include distal femur and proximal tibia-fibula.
Cross-table laterals also show lipohemarthrosis (fat-fluid level in the suprapatellar bursa)—a critical sign of intra-articular fracture even when the fracture line is subtle. Vertical-beam laterals with the patient rolled may obscure this layered fluid-fat sign.
Common Knee & Leg Injuries (Critique Context)
Injury / finding Why it matters Positioning link
Tibial plateau fracture Joint depression; surgical decisioning True AP/lateral; obliques; cross-table lateral for lipohemarthrosis
Patellar fracture Transverse vs stellate; extensor mechanism PA/AP + lateral; avoid forced skyline if unstable
Fibular head/neck fracture Associated with knee or Maisonneuve patterns Include proximal fibula on knee/tib-fib series
- Joint effusion Soft-tissue diagnosis on lateral True lateral with visible suprapatellar region
- Loose body in notch Locking symptoms Tunnel projection
- Patellar subluxation Tracking disorders Merchant/tangential comparison
Maisonneuve-pattern thinking: proximal fibular fracture with ankle injury means the full-length tib-fib and ankle series may both be needed—do not mentally isolate “ankle only” when the requisition or clinical note spans both regions.
Technique Tips
Knee and proximal tib-fib thickness often warrants a grid (or AEC with appropriate chamber) per department chart; distal tib-fib may be non-grid. Use adequate kVp for penetration of the distal femur without losing soft-tissue effusion visibility on lateral. Collimate to the joint or shaft segment of interest; bilateral Merchant views should still collimate per knee when possible. Marker placement must not cover the joint line or fibular head.
CAMRT Application Focus
When a stem shows a trauma knee that “cannot flex,” choose cross-table lateral plus AP without forcing tunnel or Settegast flexion. When the clinical question is osteochondral loose body or notch morphology, add a tunnel method with CR matched to flexion. When patellofemoral tracking is the question in a stable outpatient, Merchant-type tangential bilateral comparison is high-yield. When a tib-fib requisition arrives, ensure both joints are represented—even if that means two overlapping fields. Safe adaptation, correct rotation criteria, and pathology-linked projection choice are the RTR.4/RTR.6 behaviors the CAMRT exam rewards.