Study guide

10.4 Pelvis & SI Joints

CAMRT National Certification Exam — Radiological Technology Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts, Format & Scoring 1.2 Competency-Based Study Strategy & How to Use This Guide

2 Professional, Communicator & Collaborator Roles

2.1 Legal Requirements, Privacy & Informed Consent 2.2 Ethics, Integrity, Boundaries & Cultural Safety 2.3 Communication, Documentation & Collaboration

3 Care Provider: Safety & Assessment

3.1 Patient Identity, Transfer & Immobilization 3.2 History Review, Contraindications & Monitoring 3.3 Medical Emergencies & Patient Interventions

4 Care Provider: Infection Control & Education

4.1 Infection Prevention, Control & Sharps 4.2 Patient Education & Support

5 Radiation Safety (RTR.1)

5.1 ALARA, Time, Distance & Shielding 5.2 Radiation Effects, Risks & Dose Quantities 5.3 Personal Dosimetry & Protective Apparel 5.4 Facility Emergencies & Safe Work Environment

6 Radiation Physics & Imaging Systems (RTR.2)

6.1 X-ray Production & Interactions with Matter 6.2 Operating Imaging Systems & Accessory Equipment 6.3 Grids, Collimation, AEC & Exposure Control 6.4 QC Programs, PACS & Reject/Repeat Analysis

7 Clinical Principles (RTR.3)

7.1 Relational Anatomy & Physiology for Imaging 7.2 Pathophysiology Essentials for Radiographers 7.3 Imaging Protocols, Environments & Other Modalities

8 Positioning Fundamentals & Chest Radiography

8.1 Positioning Terminology, Landmarks & Alignment 8.2 Chest & Thorax Radiography 8.3 Ribs, Sternum & Soft-Tissue Neck

9 Upper Extremity Radiography

9.1 Hand, Wrist & Forearm 9.2 Elbow & Humerus 9.3 Shoulder Girdle

10 Lower Extremity & Pelvis Radiography

10.1 Foot, Toes & Ankle 10.2 Leg, Knee & Patella 10.3 Femur & Hip 10.4 Pelvis & SI Joints

11 Spine & Skull Radiography

11.1 Cervical Spine 11.2 Thoracic & Lumbar Spine, Sacrum & Coccyx 11.3 Skull, Facial Bones, Sinuses & Mandible

12 Abdomen & Contrast Studies

12.1 Abdomen & Acute Abdominal Series 12.2 Gastrointestinal Contrast Studies 12.3 Urinary System Contrast Studies

13 Special Procedures & Modalities

13.1 Mobile, Operating Room & Trauma Radiography 13.2 Fluoroscopy & Interventional Overview 13.3 CT, BMD & Mammography Overview

14 Contrast Media & Pharmaceuticals (RTR.5)

14.1 Venipuncture & Pharmaceutical Agents 14.2 Contrast Media: Types, Effects & Routes 14.3 Adverse Reactions & Emergency Response

15 Image Quality Fundamentals (RTR.6)

15.1 Brightness, Density & Receptor Exposure 15.2 Radiographic Contrast 15.3 Spatial Resolution & Distortion 15.4 Exposure Factors & Technical Evaluation

16 Image Critique & Pathology Recognition

16.1 Anatomy Recognition & Normal Variants 16.2 High-Weight Pathologies: Respiratory & Skeletal 16.3 Artifacts, Markers & Annotation 16.4 Repeat Decisions & Post-Processing

10.4 Pelvis & SI Joints

Key Takeaways Explain This Topic AI

AP pelvis centers midway between the ASIS and pubic symphysis on the MSP; both iliac crests, entire pelvis, proximal femora, and symmetric obturator foramina indicate correct centering and no rotation.

Pelvic inlet (caudad angulation) and outlet (cephalad angulation) projections assess pelvic ring integrity and superior/inferior displacement patterns in trauma protocols.

Judet (45° posterior oblique) views demonstrate the acetabulum: downside shows the iliopubic (anterior) column and posterior rim; upside shows the ilioischial (posterior) column and anterior rim (column/rim pairing used in critique).

SI joints are demonstrated with AP (or PA) axial and 25–30° side-up or side-down posterior obliques that place the joint of interest parallel to the beam path per method.

Pelvic trauma may be hemodynamically unstable; minimize moves, coordinate with the trauma team, and apply pregnancy screening and shielding practices consistent with facility protocol without inventing dose limits.

Last updated: July 2026

10.4 Pelvis & SI Joints

Quick Answer: The AP pelvis is the survey workhorse—center midway between ASIS and pubic symphysis on the MSP, include iliac crests to proximal femora, and prove no rotation with equal obturator foramina and symmetric iliac wings. Inlet and outlet views evaluate the pelvic ring after trauma. Judet 45° obliques map acetabular columns and rims. SI joints need AP/PA axial and 25–30° obliques . In trauma, stability and bleeding risk outrank textbook frog positions; check pregnancy status and shield when policy and anatomy allow.

General radiography — skeletal (pelvis and SI joints) sits at the intersection of high-weight skeletal procedures, trauma care, and radiation-protection judgment. CAMRT expects precise centering criteria and safe priorities when the pelvis is unstable.

Landmarks & Rotation Checks

  • Landmark / sign Use
  • ASIS Lateral centering and height reference; equal distance from table = no rotation
  • Pubic symphysis Inferior centering reference with ASIS for mid-pelvis CR
  • Iliac crest Superior collimation border on AP pelvis
  • Greater trochanter Lateral soft-tissue/bone margin; proximal femur inclusion
  • Obturator foramina Equal size/shape = no rotation; downside smaller on posterior obliques as expected
  • Iliac wings / alae Symmetric = no rotation on AP
  • Sacrum / coccyx alignment to symphysis Midline structures on MSP
  • AP Pelvis

Aspect Detail

Patient Supine; MSP to midline of table; legs extended; internally rotate feet 15–20° if hips are to be evaluated and fracture is not suspected as contraindication

CR Perpendicular to IR, midway between a line joining ASISs and the pubic symphysis , on MSP (approximately 5 cm superior to symphysis—confirm with landmarks, not guessing)

Collimation / IR Crosswise 35×43 cm typical; include iliac crests superiorly , proximal third of femora inferiorly, soft tissue of hips laterally

Respiration Suspended respiration to reduce motion

Evaluation Entire pelvis and proximal femora; symmetric obturator foramina and iliac alae ; L/R marker; lesser trochanters minimally visible if feet inverted; no tilt foreshortening of rami

Common errors: Centering too inferior clips iliac crests; too superior clips proximal femora; rotation toward one side enlarges the downside obturator foramen pattern inconsistently—use ASIS-to-table distances before exposure. Placing the CR at the iliac crest wastes inferior field and may clip the pubic rami and proximal femora.

For AP bilateral hips focused lower than a full pelvis, centering drops slightly toward the femoral necks, but trauma “pelvis series” usually means a true AP pelvis first.

Inlet and Outlet Projections

Used primarily in pelvic ring trauma protocols (often after AP pelvis) to show AP compression vs vertical shear patterns in concert with CT—still tested as positioning knowledge.

Projection CR angulation (typical concept) Demonstrates

Inlet (Brunton / superior-inferior) ~25–40° caudad to MSP, entering at ASIS level / mid-pelvis per protocol Pelvic brim (inlet); posterior displacement of ring; alignment of sacral promontory to symphysis

Outlet (Taylor-type) ~30–45° cephalad to MSP, entering mid-pelvis / superior to symphysis per protocol Superior and inferior pubic rami elongated; cephalad/caudad displacement of hemipelvis; sacral foramina more en face

Exact angles vary with pelvic tilt and department protocol— concept to remember : inlet angles caudad to look down into the brim; outlet angles cephalad to project the rami and assess vertical shift. Evaluation requires the pelvic ring structures of interest free of extreme foreshortening and the MSP centered.

Judet Views — Acetabulum

45° posterior oblique pelvis (Judet method) evaluates acetabular fractures by showing anterior and posterior columns and rims .

Position Side relationship Structures emphasized (classic pairing)

45° RPO Right side down Downside (right): iliopubic (anterior) column + posterior acetabular rim ; Upside (left): ilioischial (posterior) column + anterior rim

45° LPO Left side down Mirror of above for opposite hip

CR: Perpendicular to IR, centered to the downside acetabulum for the anterior column/posterior rim emphasis, or to the upside acetabulum when that hip is of interest—departments often obtain both obliques to show each hip’s complementary column/rim pairs. Include the entire affected acetabulum, iliac wing portion, and obturator region.

Critique tip: Match the fracture line description on a stem to the correct oblique. Confusing “downside vs upside” column anatomy is a frequent exam error—draw the pairs once in study notes and rehearse them.

SI Joints

The sacroiliac joints lie oblique (~25–30°) to the MSP, so pure AP may not open them fully.

Projection Setup CR Goal

AP axial SI joints Supine; legs extended 30–35° cephalad (female often slightly more than male in many charts—follow protocol) to MSP ~5 cm below ASIS level Bilateral SI joints and sacrum

PA axial Prone alternative Caudad angle counterpart per protocol Similar joint demonstration

AP oblique (25–30°) Elevate affected side 25–30° (side-up joint parallel concepts) or follow side-down method taught in your program Perpendicular to 1 inch medial to upside ASIS (side-up method) SI joint farthest from IR open (common side-up teaching)

Programs differ on whether the joint nearest or farthest from the IR is open for a given oblique—memorize the method your clinical sites use and the evaluation criterion: joint space open without overlap of ilium and sacrum . Bilateral comparison may require both RPO and LPO.

Pelvic Trauma Stability Concepts

Concept Radiographer implication

Open-book / AP compression Widened pubic symphysis; careful handling; binder may be in place—do not remove without team order

  • Lateral compression Internal rotation injuries; rami fractures common
  • Vertical shear Cephalad hemipelvis displacement—outlet view relevance; high energy

Hemodynamic instability Minimize rolls and exam time; portable AP pelvis may be first and only plain film before CT

Acetabular fracture Judet views or CT; avoid frog-leg; careful log-roll with team

Associated injuries Femoral neck, spine, bladder/urethra clinically—stay within ordered exam but communicate clinical red flags

Stability rule of thumb for positioning: If the pelvis is mechanically unstable or the patient is a major trauma activation, do not perform multi-position recreational obliques without trauma-team clearance. Obtain the ordered AP (and designated trauma projections) with the least movement that still yields a diagnostic image. Horizontal-beam adaptations and careful four-person log rolls are Care Provider skills, not optional extras.

Pregnancy Screening & Shielding Considerations

Pelvic radiography can irradiate the uterus and gonads . Practice points consistent with Canadian departmental norms and CAMRT safe-work expectations:

Screen for pregnancy (or document status) per facility protocol for patients of childbearing potential before elective pelvic imaging; urgent trauma imaging proceeds with clinical justification and documentation.

Shield gonads when the shield will not obscure required bony anatomy (e.g., male gonadal shielding below the pubic bone on some pelvis exams; female ovarian shielding is often impractical on true AP pelvis because ovaries overlie iliac structures—follow site policy rather than inventing a universal rule).

Collimate tightly; avoid automatic “full abdomen” fields when only pelvis is ordered.

Optimize technique (correct kVp/mAs, grid, AEC) to avoid repeats—repeat pelvic exposures are a major unnecessary dose source.

Do not invent numeric dose limits or national policy text on the exam; describe ALARA behaviors : justification, optimization, shielding when it does not compromise diagnosis, and pregnancy inquiry per protocol.

Technique & Image Quality

Use a grid , appropriate higher kVp for pelvic thickness, and AEC chambers selected so the central sensor is not only over bowel gas or dense hardware. Suspended respiration. Lead markers on the IR, not only digital annotation. For inlet/outlet and Judet, confirm angulation and 45° obliquity with sponges and angle sponges before exposing—geometry errors waste dose.

CAMRT Application Focus

When the stem asks for centering of AP pelvis, answer midway between ASIS and pubic symphysis on MSP with crests-to-proximal-femora inclusion and symmetric obturators. When acetabular fracture detail is needed, choose Judet 45° obliques and recall downside vs upside column/rim pairs. When pelvic ring displacement is the question, add inlet (caudad) and outlet (cephalad) concepts. When SI joint pain is chronic and ordered as such, use axial + 25–30° obliques . When the patient is a multi-trauma with unstable pelvis, prioritize safe, minimal-movement AP and team communication over complete elective series. Procedure competence (RTR.4), image critique (RTR.6), and safe work (RTR.1 / Care Provider) converge on every pelvis requisition.