Study guide
11.1 Cervical Spine
CAMRT National Certification Exam — Radiological Technology Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts, Format & Scoring 1.2 Competency-Based Study Strategy & How to Use This Guide
2 Professional, Communicator & Collaborator Roles
2.1 Legal Requirements, Privacy & Informed Consent 2.2 Ethics, Integrity, Boundaries & Cultural Safety 2.3 Communication, Documentation & Collaboration
3 Care Provider: Safety & Assessment
3.1 Patient Identity, Transfer & Immobilization 3.2 History Review, Contraindications & Monitoring 3.3 Medical Emergencies & Patient Interventions
4 Care Provider: Infection Control & Education
4.1 Infection Prevention, Control & Sharps 4.2 Patient Education & Support
5 Radiation Safety (RTR.1)
5.1 ALARA, Time, Distance & Shielding 5.2 Radiation Effects, Risks & Dose Quantities 5.3 Personal Dosimetry & Protective Apparel 5.4 Facility Emergencies & Safe Work Environment
6 Radiation Physics & Imaging Systems (RTR.2)
6.1 X-ray Production & Interactions with Matter 6.2 Operating Imaging Systems & Accessory Equipment 6.3 Grids, Collimation, AEC & Exposure Control 6.4 QC Programs, PACS & Reject/Repeat Analysis
7 Clinical Principles (RTR.3)
7.1 Relational Anatomy & Physiology for Imaging 7.2 Pathophysiology Essentials for Radiographers 7.3 Imaging Protocols, Environments & Other Modalities
8 Positioning Fundamentals & Chest Radiography
8.1 Positioning Terminology, Landmarks & Alignment 8.2 Chest & Thorax Radiography 8.3 Ribs, Sternum & Soft-Tissue Neck
9 Upper Extremity Radiography
9.1 Hand, Wrist & Forearm 9.2 Elbow & Humerus 9.3 Shoulder Girdle
10 Lower Extremity & Pelvis Radiography
10.1 Foot, Toes & Ankle 10.2 Leg, Knee & Patella 10.3 Femur & Hip 10.4 Pelvis & SI Joints
11 Spine & Skull Radiography
11.1 Cervical Spine 11.2 Thoracic & Lumbar Spine, Sacrum & Coccyx 11.3 Skull, Facial Bones, Sinuses & Mandible
12 Abdomen & Contrast Studies
12.1 Abdomen & Acute Abdominal Series 12.2 Gastrointestinal Contrast Studies 12.3 Urinary System Contrast Studies
13 Special Procedures & Modalities
13.1 Mobile, Operating Room & Trauma Radiography 13.2 Fluoroscopy & Interventional Overview 13.3 CT, BMD & Mammography Overview
14 Contrast Media & Pharmaceuticals (RTR.5)
14.1 Venipuncture & Pharmaceutical Agents 14.2 Contrast Media: Types, Effects & Routes 14.3 Adverse Reactions & Emergency Response
15 Image Quality Fundamentals (RTR.6)
15.1 Brightness, Density & Receptor Exposure 15.2 Radiographic Contrast 15.3 Spatial Resolution & Distortion 15.4 Exposure Factors & Technical Evaluation
16 Image Critique & Pathology Recognition
16.1 Anatomy Recognition & Normal Variants 16.2 High-Weight Pathologies: Respiratory & Skeletal 16.3 Artifacts, Markers & Annotation 16.4 Repeat Decisions & Post-Processing
11.1 Cervical Spine
Key Takeaways Explain This Topic AI
Routine cervical series commonly includes AP axial (cephalad angle through C4), open-mouth odontoid (dens and C1–C2 lateral masses), and true lateral (72 in / ~180 cm SID when possible) demonstrating C1 through C7–T1.
Anterior obliques (RAO/LAO) demonstrate the downside intervertebral foramina; posterior obliques (RPO/LPO) demonstrate the upside foramina—know which side is shown before you critique.
Trauma protocol: horizontal-beam (cross-table) lateral first while the cervical collar remains on until a qualified practitioner clears the spine; never force flexion, extension, or rotation.
Swimmer’s (Twining/Pawlow) lateral separates C7–T1 when the standard lateral is obscured by shoulders; arms and beam geometry must not compromise cervical immobilization in trauma.
High-yield injury awareness for RTR.4/RTR.6: Jefferson (C1 burst), hangman’s (bilateral C2 pedicle/pars), clay-shoveler’s (spinous process avulsion, often C6–T1), and dens fractures—positioning errors can hide or mimic these patterns.
Last updated: July 2026
11.1 Cervical Spine
Quick Answer: A diagnostic cervical series starts with a true lateral that includes C1 through C7–T1 , an AP axial through C4 with cephalad angulation, and an open-mouth odontoid that shows the dens and symmetric C1 lateral masses. Use obliques for foramina, swimmer’s when C7–T1 is hidden, and horizontal-beam lateral first in trauma— never flex, extend, or remove the collar until the spine is cleared. Match geometry to the clinical question so RTR.4 procedures support RTR.6 acceptance decisions.
General radiography — skeletal (spine) is a high-weight clinical procedure area on the CAMRT Radiological Technology blueprint. Cervical examinations are frequent, high-stakes, and rich in critique stems: incomplete coverage of C7–T1, rotated open-mouth views, wrong oblique side, and unsafe motion in trauma all appear as application items. This section builds procedure competence you will reuse for thoracic and lumbar work and for trauma adaptations later in the guide.
Relational Anatomy Essentials
- Structure Why it matters for imaging
- C1 (atlas) Ring of bone; no body; articulates with occipital condyles and dens
- C2 (axis) Dens (odontoid process) is the pivot; fractures here threaten cord stability
- C3–C6 Typical cervical vertebrae with bifid spinous processes; uncinate processes form uncovertebral joints
- C7 Prominent spinous process (vertebra prominens); transition to thoracic morphology
- Intervertebral foramina Face ~45° anterior and slightly inferior—oblique geometry is designed for them
- Zygapophyseal (facet) joints Best seen on lateral (and some oblique) projections
Landmarks for centering and collimation: mastoid tip / EAM , gonion , thyroid cartilage (~C4–C5) , vertebral prominens (C7) , and the jugular notch as a rough T2–T3 reference when swimmer’s geometry is needed.
Shared Cervical Technique Principles
SID: Lateral cervical often uses ~180 cm (72 in) to reduce magnification and improve geometric sharpness of the neck; AP and open-mouth commonly use ~100–115 cm (40–44 in) at the upright or table Bucky—follow department charts.
Grid: Adult neck thickness usually warrants a grid for AP/lateral Bucky work; small pediatrics may be non-grid per protocol.
Collimation: Skin margins of the neck; include base of skull through upper thoracic transition as required by the projection—do not open to the entire chest “for insurance.”
Respiration: Suspended expiration for lateral often drops the shoulders slightly; open-mouth may use a soft “ah” to drop the tongue; AP axial typically suspended respiration.
Immobilization & care: Support the head; never drag a suspected unstable neck. Explain each step; pain and anxiety are high.
Markers & annotations: Correct laterality; note trauma, collar on, horizontal beam, flexion/extension only when applicable.
AP Axial Cervical Spine
- Element Typical practice
- Position Upright or supine; MSP perpendicular to IR; shoulders relaxed and equal
CR Angled 15–20° cephalad (department range often 15–20°), centered at approximately C4 (thyroid cartilage level)
- Collimation C3 through T2 region as protocol requires; lateral soft tissues of neck
- Goal Open intervertebral disk spaces of mid-cervical spine; spinous processes midline
Evaluation criteria: Spinous processes centered in the midline (rotation check); mandibular angles and mastoids roughly symmetric; intervertebral spaces open (correct cephalad angle); C3–C7 vertebral bodies demonstrated without excessive mandibular superimposition. Insufficient cephalad angle closes disk spaces; rotation shifts spinous processes off midline and can mimic pathology.
Why the angle? The cervical bodies and disk spaces are naturally lordotic; a cephalad CR parallels those spaces so they appear open rather than foreshortened.
Open-Mouth (AP) Odontoid Projection
Element Typical practice
Position Patient supine or upright; mouth wide open; MSP perpendicular; a line from lower margin of upper incisors to mastoid tips (or base of skull) roughly perpendicular to IR
- CR Perpendicular through the open mouth to the center of the IR / dens region
- Instruction Soft phonation (“ah”) to depress tongue; immobilize head
- Goal Dens, C1 lateral masses, and C1–C2 alignment
Evaluation criteria: Dens free of superimposition by teeth or base of skull; equal spaces between lateral masses of C1 and dens; symmetric C1–C2 joint spaces; spinous process of C2 midline if visualized. If teeth obscure the dens, adjust head extension or CR slightly; if base of skull obscures the dens, adjust flexion/extension the opposite way—classic critique logic on exams.
Trauma note: Some departments substitute Fuchs (AP) or Judd (PA) for dens when the mouth cannot open, or move quickly to CT. Know that open-mouth quality failures are common and that you must not force jaw motion after facial trauma.
Lateral Cervical Spine
The lateral is often the most important single radiograph for cervical trauma screening in general radiography pathways still using plain film before or alongside CT.
Element Typical practice
Position Upright left lateral preferred when ambulatory; left shoulder against IR; MSP parallel to IR; chin slightly elevated so mandible does not obscure upper spine
- SID ~180 cm when space allows
- CR Perpendicular to C4 , horizontal beam if patient is supine (cross-table)
Shoulders Depressed (weights in non-trauma cooperative patients only per protocol); never pull arms in uncleared trauma without team direction
Must include Sella / base of skull region through C7–T1
Evaluation criteria:
- Criterion Acceptable appearance
- Coverage C1 through inferior endplate of C7 and preferably T1
- Rotation Right and left zygapophyseal joints superimposed; mandibular rami nearly superimposed
- Tilt Disk spaces open; vertebral bodies rectangular, not diamond-shaped
- Soft tissue Prevertebral soft tissues evaluable (important for swelling after trauma)
- Motion Sharp cortical margins
If C7–T1 is not demonstrated , do not “accept and hope”—obtain a swimmer’s lateral or other department-approved method, or escalate imaging pathway per protocol. Missing the cervicothoracic junction is a classic miss zone for injury.
Oblique Cervical Spine — Anterior vs Posterior
Obliques demonstrate intervertebral foramina and pedicles. Naming confusion is a high-yield exam trap.
- Patient position Body rotation Foramina demonstrated (standard teaching)
- RAO 45° anterior oblique Right (downside) intervertebral foramina
- LAO 45° anterior oblique Left (downside) intervertebral foramina
- RPO 45° posterior oblique Left (upside) intervertebral foramina
- LPO 45° posterior oblique Right (upside) intervertebral foramina
Memory aid: Anterior obliques show the downside foramina (the side closest to the IR). Posterior obliques show the upside foramina. Many Canadian departments prefer anterior (RAO/LAO) upright obliques for thyroid dose and positioning comfort—know your site protocol and still be able to interpret either naming system on the exam.
- Element Typical practice
- Rotation 45° from true lateral/AP plane (some protocols 45–60°—follow site)
CR Often 15–20° cephalad for posterior obliques or 15–20° caudad for anterior obliques so the beam parallels the foramina; centered near C4
Evaluation Open foramina of interest; pedicles in profile; C2–C7 included as required
Critique: Closed foramina mean wrong rotation or wrong CR angle. Demonstrating the wrong side relative to the requisition is a procedural error even if the image “looks pretty.”
Swimmer’s Lateral (Cervicothoracic / Twining)
- Element Typical practice
- Purpose Separate C7–T1 from shoulder superimposition
- Position Arm nearest IR elevated (or dependent arm up in recumbent variants); opposite shoulder depressed
- CR Perpendicular or slight caudal angle to C7–T1 interspace
- SID Often 100–180 cm per protocol and room geometry
Use when the routine lateral fails at the cervicothoracic junction. In trauma , coordinate with the care team so arm movement does not violate spinal precautions; alternative imaging (CT) may supersede repeated attempts.
Flexion and Extension Laterals
Only when specifically ordered and the cervical spine is cleared for motion by the appropriate practitioner (or when the requisition is explicitly for functional stability assessment under that clearance).
Projection Motion Clinical idea
Lateral flexion Chin toward chest as tolerated Anterior disk spaces open; assess instability / ligamentous injury patterns
Lateral extension Chin elevated / head back as tolerated Posterior elements relationship; alignment change
Hard rules: Do not coach forced range of motion in uncleared trauma, rheumatoid instability without orders, or severe pain with neurologic symptoms—stop and escalate. Document patient effort and limitations. These are not part of a default trauma cervical series.
Trauma Horizontal-Beam Lateral — First Principles
Do not remove the cervical collar until a qualified practitioner orders removal after clearance pathway.
Obtain a cross-table lateral with horizontal CR; IR beside the neck; MSP vertical; no rotation if possible.
Include C1 through C7–T1 ; if not, swimmer’s or CT per protocol—do not sit the patient up for a “pretty” upright lateral first.
Minimize log-roll and manipulation; use team lift techniques taught in care-provider competencies.
Critique immediately for coverage and gross alignment; communicate critical findings per facility critical-result policy without diagnosing beyond your role.
Portable trauma laterals often use shorter SID and grid challenges—align carefully, annotate horizontal beam and collar status, and accept that CT is frequently preferred for comprehensive trauma clearance while plain-film skills remain exam-relevant.
High-Yield Cervical Injuries (Awareness for Positioning & Critique)
Injury Pattern (overview) Imaging implication
Jefferson fracture Burst of C1 ring from axial load (e.g., diving) Open-mouth: lateral masses of C1 may overhang C2; lateral for prevertebral soft tissue
Hangman’s fracture Bilateral fracture of C2 pars/pedicles (traumatic spondylolisthesis of C2) Lateral alignment at C2–C3 critical; do not flex/extend
Dens (odontoid) fracture Types involving tip, base, or body of dens High-quality open-mouth or CT; rotation can fake asymmetry
Clay-shoveler’s fracture Avulsion of spinous process (often C6–T1 ) Lateral/swimmer’s must include lower cervical spinous processes
Facet dislocation / perched facets Hyperflexion injury; jumped facets True lateral alignment lines; obliques sometimes add information—CT often definitive
On CAMRT-style stems, link positioning deficiency to missed anatomy : a lateral that stops at C6 can hide clay-shoveler’s or C7 facet injury; a rotated open-mouth can mimic Jefferson overhang; coaching flexion before clearance can convert a stable situation into a cord emergency.
Positioning Summary Table — Cervical Spine
- Projection Patient / geometry CR Key criteria
- AP axial MSP ⊥ IR 15–20° cephalad to C4 Midline spinous processes; open disks C3–C7
Open-mouth Mouth open; occlusal-mastoid line adjusted ⊥ through open mouth Dens free of teeth/skull; symmetric C1 masses
Lateral True lateral; long SID if possible ⊥ C4 (horizontal if cross-table) C1–T1; superimposed zygapophyseal joints
- Anterior oblique 45° RAO/LAO Angle per protocol to C4 Downside foramina open
- Posterior oblique 45° RPO/LPO Angle per protocol to C4 Upside foramina open
- Swimmer’s One arm up, opposite shoulder down To C7–T1 Cervicothoracic junction demonstrated
- Flex/ext lateral Only if ordered & cleared ⊥ mid-cervical Controlled motion; alignment comparison
- Bottom Line for RTR.4 Cervical Work
Produce a lateral that truly reaches C7–T1 , an AP axial that opens mid-cervical disks , and an open-mouth that frees the dens with symmetric C1–C2 relationships. Use obliques deliberately for the correct foramina side, add swimmer’s when shoulders win the superimposition battle, and treat trauma as horizontal-beam lateral first, collar on, no forced motion . Flexion/extension is a specialty add-on after clearance—not a routine trauma step. That procedure judgment is exactly what high-weight skeletal gen-rad items test on the CAMRT exam.