Study guide

11.3 Skull, Facial Bones, Sinuses & Mandible

CAMRT National Certification Exam — Radiological Technology Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts, Format & Scoring 1.2 Competency-Based Study Strategy & How to Use This Guide

2 Professional, Communicator & Collaborator Roles

2.1 Legal Requirements, Privacy & Informed Consent 2.2 Ethics, Integrity, Boundaries & Cultural Safety 2.3 Communication, Documentation & Collaboration

3 Care Provider: Safety & Assessment

3.1 Patient Identity, Transfer & Immobilization 3.2 History Review, Contraindications & Monitoring 3.3 Medical Emergencies & Patient Interventions

4 Care Provider: Infection Control & Education

4.1 Infection Prevention, Control & Sharps 4.2 Patient Education & Support

5 Radiation Safety (RTR.1)

5.1 ALARA, Time, Distance & Shielding 5.2 Radiation Effects, Risks & Dose Quantities 5.3 Personal Dosimetry & Protective Apparel 5.4 Facility Emergencies & Safe Work Environment

6 Radiation Physics & Imaging Systems (RTR.2)

6.1 X-ray Production & Interactions with Matter 6.2 Operating Imaging Systems & Accessory Equipment 6.3 Grids, Collimation, AEC & Exposure Control 6.4 QC Programs, PACS & Reject/Repeat Analysis

7 Clinical Principles (RTR.3)

7.1 Relational Anatomy & Physiology for Imaging 7.2 Pathophysiology Essentials for Radiographers 7.3 Imaging Protocols, Environments & Other Modalities

8 Positioning Fundamentals & Chest Radiography

8.1 Positioning Terminology, Landmarks & Alignment 8.2 Chest & Thorax Radiography 8.3 Ribs, Sternum & Soft-Tissue Neck

9 Upper Extremity Radiography

9.1 Hand, Wrist & Forearm 9.2 Elbow & Humerus 9.3 Shoulder Girdle

10 Lower Extremity & Pelvis Radiography

10.1 Foot, Toes & Ankle 10.2 Leg, Knee & Patella 10.3 Femur & Hip 10.4 Pelvis & SI Joints

11 Spine & Skull Radiography

11.1 Cervical Spine 11.2 Thoracic & Lumbar Spine, Sacrum & Coccyx 11.3 Skull, Facial Bones, Sinuses & Mandible

12 Abdomen & Contrast Studies

12.1 Abdomen & Acute Abdominal Series 12.2 Gastrointestinal Contrast Studies 12.3 Urinary System Contrast Studies

13 Special Procedures & Modalities

13.1 Mobile, Operating Room & Trauma Radiography 13.2 Fluoroscopy & Interventional Overview 13.3 CT, BMD & Mammography Overview

14 Contrast Media & Pharmaceuticals (RTR.5)

14.1 Venipuncture & Pharmaceutical Agents 14.2 Contrast Media: Types, Effects & Routes 14.3 Adverse Reactions & Emergency Response

15 Image Quality Fundamentals (RTR.6)

15.1 Brightness, Density & Receptor Exposure 15.2 Radiographic Contrast 15.3 Spatial Resolution & Distortion 15.4 Exposure Factors & Technical Evaluation

16 Image Critique & Pathology Recognition

16.1 Anatomy Recognition & Normal Variants 16.2 High-Weight Pathologies: Respiratory & Skeletal 16.3 Artifacts, Markers & Annotation 16.4 Repeat Decisions & Post-Processing

11.3 Skull, Facial Bones, Sinuses & Mandible

Key Takeaways Explain This Topic AI

Skull series fundamentals include PA (or PA axial Caldwell-type geometry), AP axial Towne, and lateral skull—each with strict MSP/IOML or OML baseline control to avoid rotation and tilt.

Facial bone work prioritizes Waters (parietoacanthial), Caldwell, and lateral facial projections; orbits require precise baselines so the petrous ridges sit correctly relative to the orbits.

Paranasal sinus radiography should be performed upright with a horizontal beam whenever possible so air–fluid levels are demonstrated; recumbent-only sinus films miss layering.

Mandible projections include PA, axiolateral (oblique) for the body/ramus/symphysis regions of interest, and SMV when indicated for bases and arches.

Modern trauma pathways often prefer CT for complex skull/facial injury, but CAMRT candidates must still perform and critique classic radiographic projections and know when geometry or modality limits apply.

Last updated: July 2026

11.3 Skull, Facial Bones, Sinuses & Mandible

Quick Answer: Control baselines (OML, IOML, MSP) so skull and facial projections are true. Know PA/Caldwell , Towne , lateral skull , Waters , upright sinuses with horizontal beam , and mandible axiolateral/PA/SMV . In major trauma, CT is often preferred , but you must still produce diagnostic radiographs when ordered and critique rotation, tilt, and air–fluid geometry under RTR.4/RTR.6.

Craniofacial radiography is less common than spine or chest in some departments because CT dominates trauma and complex sinus disease, yet it remains blueprint-relevant for general radiography competence. Examination stems love baseline errors: a Waters projection with the mouth closed when open-mouth was ordered, a sinus series done supine with no horizontal beam, or a Towne with the wrong angle that dumps the dorsum sellae into the foramen magnum incorrectly.

Baselines and Planes — The Language of the Head

  • Baseline / plane Definition Why it matters
  • MSP (midsagittal plane) Divides head into equal right/left Rotation control on PA/AP/lateral
  • OML (orbitomeatal line) Outer canthus to EAM Classic Caldwell/Towne reference

IOML (infraorbitomeatal line) Infraorbital margin to EAM (~7° from OML) Often more achievable; angle adjustments differ by ~7° from OML protocols

GML (glabellomeatal) Glabella to EAM Occasional protocol reference

IPL (interpupillary line) Line between pupils Must be vertical for true lateral; horizontal for true PA symmetry checks

AML (acanthiomeatal line) Acanthion to EAM Waters geometry

Rotation vs tilt: Rotation shows unequal distances from lateral orbital margins to the skull margins or unequal mandibular rami on lateral. Tilt shows superior orbital margins at different heights or ear canals not superimposed on lateral. Fix the plane that failed—do not just increase kVp.

Skull — PA / PA Axial (Caldwell-type)

  • Element Typical practice
  • Position Prone or erect facing IR; MSP perpendicular; forehead and nose against IR for PA (OML ⊥ IR)

CR PA Caldwell: 15° caudad to exit nasion (petrous ridges projected into lower third of orbits); some PA skull uses 0° to exit glabella/nasion with petrous filling orbits—know which protocol is ordered

SID ~100–115 cm

Evaluation (Caldwell 15° caudad): Petrous ridges in the lower third of the orbits ; equal distance from lateral orbit to lateral skull margin bilaterally (no rotation); superior orbital margins on the same transverse level (no tilt); frontal bone and frontal sinuses demonstrated.

AP skull alternatives exist for trauma patients who cannot lie prone—expect magnification of the frontal bone and carefully match angles to the baseline in use (OML vs IOML).

Skull — AP Axial (Towne)

  • Element Typical practice
  • Position Supine or erect AP; MSP perpendicular; OML perpendicular to IR (or IOML with angle adjusted)

CR 30° caudad to OML (or 37° caudad to IOML ) centered ~6 cm above the glabella / to pass through the foramen magnum region per protocol

Goal Occipital bone, dorsum sellae and posterior clinoids projected within the foramen magnum

Evaluation: Dorsum sellae and posterior clinoids visible within the foramen magnum; symmetric petrous ridges; no rotation (equal distance from foramen magnum to lateral skull). Too little angle fails to project the dorsum into the foramen magnum; too much angle foreshortens the dorsum excessively or projects anterior anatomy incorrectly.

Skull — Lateral

Element Typical practice

Position True lateral (side of interest against IR for trauma/localizing when specified); MSP parallel to IR; IPL perpendicular to IR; IOML perpendicular to front edge of IR

  • CR Perpendicular, 5 cm superior to EAM (2 in)
  • Collimation Entire cranium

Evaluation: Superimposed orbital roofs, greater wings of sphenoid, EAMs, and mandibular rami; sella turcica in profile; no superior-inferior tilt. Lateral skull is also the starting geometry for many facial lateral adaptations with tighter collimation.

  • Facial Bones — Waters, Caldwell, Lateral
  • Parietoacanthial (Waters)
  • Element Typical practice
  • Position Erect preferred; chin on IR; MML (mentomeatal line) perpendicular to IR (OML ~37° to IR)
  • CR Perpendicular to exit acanthion

Demonstrates Maxillary sinuses, orbital rims, zygomatic bones, nasal septum region; petrous ridges below maxillary sinuses

Open-mouth Waters adds visualization of sphenoid sinuses through the open mouth—used in sinus series variants.

Evaluation: Petrous ridges inferior to the maxillary floors; equal orbit-to-skull margins; acanthion centered.

PA Axial Caldwell for facial / orbits

Same 15° caudad geometry as skull Caldwell but collimated and critiqued for orbital rims , frontal/ethmoid regions, and petrous placement in the lower orbits. Precise baseline control is non-negotiable for blowout-fracture screening on plain film pathways.

Lateral facial bones

True lateral of the face centered to the zygoma / midway between outer canthus and EAM depending on protocol; demonstrates superimposed facial bones, sella, and soft-tissue profiles. Used with Waters/Caldwell as a standard facial set in many departments.

Orbits

Orbital series may include Waters , Caldwell , lateral , and sometimes rhese (parieto-orbital oblique) for the optic foramen—know that Rhese places the optic foramen in the lower outer quadrant of the orbit of interest with three-point landing (chin, cheek, nose) and MSP angled ~53° in classic teaching. For suspected metallic foreign body before MRI, follow facility orbital screening protocols (often CT or dedicated radiographs per policy).

Paranasal Sinuses — Upright Technique

Air–fluid levels are a primary reason sinus radiography still appears on exams and in limited clinical pathways.

  • Rule Rationale
  • Upright patient Fluid layers dependently; air rises

Horizontal CR Vertical beam on a recumbent patient will not show a true air–fluid level even if the head is turned

  • No excessive tilt after positioning Allow a moment for fluid to settle if the patient just lay down
  • Open-mouth Waters / lateral / Caldwell Common sinus series components—follow site protocol

Lateral sinus upright demonstrates sphenoid, frontal, and maxillary relationships with air–fluid potential. SMV may show ethmoid and sphenoid but is uncomfortable and less used when CT is available.

Exam trap: Performing a “sinus series” fully recumbent with only vertical CR geometry defeats air–fluid demonstration. If the patient cannot sit/stand, horizontal-beam adaptations (e.g., cross-table lateral with head supported) are required—not a routine supine AP with vertical beam alone.

  • Mandible — PA, Axiolateral Oblique, SMV
  • PA mandible

Forehead and nose against IR (OML ⊥ IR); CR perpendicular to exit junction of lips or acanthion region per protocol to demonstrate rami and body. PA axial variants exist for specific body regions.

Axiolateral / axiolateral oblique mandible

This is the workhorse for demonstrating the ramus, body, or mentum of the side down/of interest without superimposition of the opposite mandible.

  • Region of interest Head rotation / tilt concept (classic teaching)
  • Ramus True lateral of head (minimal rotation)
  • Body Rotate head 30° toward IR
  • Mentum / symphysis Rotate head 45° toward IR
  • General survey ~10–15° tilt of head / CR 25° cephalad combinations— follow department chart

CR: Typically angled 25° cephalad (or head tilted 25° with perpendicular CR) to project the downside mandible free of the upside. Center to the region of interest (body vs ramus).

Evaluation: Desired mandibular segment elongated and free of opposite half; temporomandibular region included when indicated; teeth and alveolar bone sharp enough for trauma survey.

SMV (submentovertical)

Neck extended until IOML is parallel to IR ; CR perpendicular to IOML through midline between mandibular angles / 2 cm anterior to EAM level depending on whether mandible, zygomatic arches, or cranial base is prioritized. Demonstrates cranial base, dens in some contexts, and zygomatic arches (bilateral) when exposure and extension allow. Contraindicated or modified in cervical trauma—never force hyperextension on an uncleared neck.

Trauma Awareness: CT Preference vs Radiographic Skill

In Canadian emergency practice, non-contrast CT is often first-line for significant head injury, complex facial fractures, and sinus disease with complications. Your professional role includes:

Knowing when radiographs are still ordered (limited access, specific follow-up, foreign body, mandible outpatient series, resource-limited settings).

Performing projections correctly the first time to avoid repeats in injured patients.

Recognizing limits: plain films can miss nondisplaced fractures and intracranial injury—do not reassure beyond your scope; complete the order and escalate urgent findings per policy.

Adapting: cross-table laterals, AP reverse Caldwell/Towne, horizontal-beam Waters-type geometry when the patient cannot be prone or sit.

Collar and c-spine precautions remain in force during skull/facial imaging until cleared—SMV and forced extension are inappropriate in uncleared trauma.

CAMRT stems may describe a polytrauma patient and ask which projection is obtainable without removing immobilization, or which geometry demonstrates air–fluid levels—answer with safe, baseline-correct technique while acknowledging modality pathways.

Technique and Image Quality Notes

Factor Practical guidance

kVp Higher for skull (often ~70–85+ range digital; follow charts) to penetrate cranium; facial may be slightly lower for subject contrast

  • Grid Adult skull/facial Bucky work usually grid; tight collimation always
  • AEC Center chambers carefully; dense petrous bone can fool cells if malpositioned
  • Motion Short exposure time; head clamps/sponges; clear instructions
  • Markers Side markers critical—especially laterals and axiolateral mandible
  • Jewelry Remove dentures, hairpins, glasses, earrings, necklaces when safe
  • Positioning Summary Table — Skull, Face, Sinuses, Mandible
  • Projection Baseline / key geometry Primary demonstration
  • PA Caldwell (15° caudad) OML ⊥ IR; exit nasion Frontal bone/sinuses; petrous in lower orbits
  • AP axial Towne 30° caudad to OML (37° to IOML) Occiput; dorsum in foramen magnum
  • Lateral skull MSP ∥ IR; CR 5 cm above EAM Superimposed halves; sella profile
  • Waters MML ⊥ IR; exit acanthion Facial bones; maxillary sinuses; petrous below maxillae
  • Upright sinuses Horizontal beam Air–fluid levels
  • PA mandible OML ⊥ IR Rami/body overview
  • Axiolateral oblique mandible 25° cephalad concept; rotate for region Body/ramus/mentum of interest
  • SMV IOML ∥ IR; no forced trauma extension Base of skull / arches / mandible survey
  • Bottom Line for Craniofacial RTR Competence

Master baselines first—every named projection is a baseline problem in disguise. Produce Caldwell , Towne , lateral , Waters , upright horizontal-beam sinuses , and mandible axiolateral/PA/SMV that meet evaluation criteria for rotation, tilt, and petrous placement. Prefer CT awareness for heavy trauma without abandoning projection skill. That balance of classic radiography and modern clinical judgment is what the CAMRT expects from an entry-to-practice radiological technologist in RTR.4 procedure performance and RTR.6 image critique.