Study guide

6.5 Customizing the Cut: Guideline Types & Named Cutting Techniques

Red Seal Hairstylist Interprovincial Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 How to Use This Guide & Study Strategy

2 Safety, Hygiene & Infection Control

2.1 Cleaning, Sanitizing, Disinfecting & Sterilizing 2.2 WHMIS, SDS & Hazardous Materials 2.3 Maintaining a Safe, Hygienic Work Environment & PPE

3 Tools, Equipment & Client Preparation

3.1 Manual, Electric & Major Equipment Use and Maintenance 3.2 Client Consultation, Service Planning, Draping & Documentation 3.3 Communication, Professionalism & Mentoring Techniques

4 Hair & Scalp Care

4.1 Hair Structure, Growth & Trichology 4.2 Hair & Scalp Analysis (Texture, Density, Porosity, Elasticity) 4.3 Scalp Disorders & Unfavourable Reactions 4.4 Shampooing, Conditioning & Scalp Treatments

5 Cuts Hair: Fundamentals

5.1 Cutting Principles: Elevation, Projection, Design Lines & Tension 5.2 One-Length & Graduated Shapes 5.3 Layering, Over-Direction & Guidelines 5.4 Texturizing & Razor Cutting 5.5 Growth Patterns, Natural Fall & Cutting-Design Interpretation

6 Cuts Hair: Texture, Clipper & Facial/Nape

6.1 Clipper Cutting & Shear-Over-Comb 6.2 Cutting Diverse Hair Textures 6.3 Cutting Facial Hair & Nape (Beard, Moustache, Shaving) 6.4 Sectioning, Head-Shape Analysis & Dry Refinement 6.5 Customizing the Cut: Guideline Types & Named Cutting Techniques

7 Wet Styling & Sets

7.1 Roller Sets & Wet Setting 7.2 Finger Waves & Pin Curls 7.3 Blow-Drying & Airflow Styling 7.4 Freestyle Placement, Wet Styling Aids & the Elements and Principles of Design

8 Thermal Styling & Finishing

8.1 Flat Irons, Curling Irons & Thermal Tool Safety 8.2 Updos & Finishing Products 8.3 Styling with Hair Additions: Foundation, Support & Home-Care Education

9 Chemical Texture: Perming

9.1 Permanent Wave Chemistry: Disulfide Bonds & Waving Lotions 9.2 Perm Wrapping Techniques, Base Placement & End Papers 9.3 Perm Processing, Test Curls, Neutralizing & Rinsing 9.4 Waving Solution Families, Wrap Patterns & Perm Safety Practice

10 Chemical Texture: Relaxing & Safety

10.1 Chemical Relaxing: Lye, No-Lye & Thio 10.2 Soft-Curl & Neutralizing 10.3 Chemical Safety, Strand/Patch Tests & Contraindications 10.4 Smoothing & Re-forming Systems

11 Hair Colour: Theory & Chemistry

11.1 Colour Theory, the Level System & Tone 11.2 Oxidation & Dye Chemistry 11.3 Developers, Lift & the Level System 11.4 Toning & Gray Coverage

12 Hair Colour: Application, Lightening & Correction

12.1 Colouring Virgin & Regrowth Hair, Placement Techniques 12.2 Lightening, Bleach & Decolourization 12.3 Colour Correction: Banding, Fillers & Artificial Colour Removal 12.4 Colour Consultation, Patch & Strand Testing 12.5 Colour Placement Systems: Foiling, Blocking, Freehand & Special Effects

13 Specialized Services

13.1 Hair Extensions, Wigs & Hairpieces 13.2 Facial & Nape Services: Shaping, Shaving & Facial-Hair Colour 13.3 Skin Awareness & Scope of Practice

14 Salon Operations

14.1 Front Desk: Scheduling, Client Interaction & Financial Transactions 14.2 Business Fundamentals: Costs, Pricing & Inventory 14.3 Retailing, Marketing & Professionalism 14.4 Developing a Business Plan: Ownership, Regulation, Finance & Salon Set-Up

15 Final Review & Exam Strategy

15.1 Exam Strategy, Question Types & Test-Taking 15.2 Final Preparation Checklist & Week-Before Plan

6.5 Customizing the Cut: Guideline Types & Named Cutting Techniques

Key Takeaways Explain This Topic AI

The RSOS names four guideline types — interior, perimeter, travelling and stationary — and the exam expects you to pick the right pair for a given shape.

Undercutting removes weight from beneath the surface, leaving the top length to fall over a shorter interior; disconnection deliberately leaves no blend between two lengths.

C-shaping and scooping cut a curved rather than straight line so the shape follows the head form and the face frame.

Texturizing (thinning) shears differ by tooth count: fewer, wider teeth chunk; 30-plus fine teeth blend — and neither is ever used within about 5 cm of the scalp or on the surface of fine hair.

Customizing has a stopping rule: manipulate the hair, re-evaluate the form, and remove more only if the shape still asks for it — you cannot put hair back.

Last updated: August 2026

What "Customizing" Means in the Standard

Sub-task C-7.03 Customizes haircuts carries thirteen performance criteria and is the heaviest single sub-task in MWA C, which is 20% of the exam. It is where the standard puts selecting the cutting technique to personalize the haircut , determining the excess hair to be removed , manipulating hair to determine if more customizing is required , and performing visual evaluation for design shape and form . In other words: the perimeter and the elevation give you a shape; customizing gives you the client's shape.

The Four Guideline Types

Section 5.1 introduced stationary and travelling guides. The RSOS lists four guideline types, and the other two describe where the guide sits rather than whether it moves.

Guideline What it is Used for

Perimeter guide The outer edge of the shape — the baseline at the nape, the sides, the fringe Establishes total length and the silhouette outline; cut first in most shapes

Interior guide A guide taken inside the shape, usually at the crown or top, which the rest of the interior is cut to Sets the internal layer length independently of the perimeter

Stationary guide A guide that is cut once and never re-cut; every section travels back to it One-length shapes, uniform layers, over-directed length build-up

Travelling (moving) guide Re-cut with each new section, so it shifts across the head Graduation, progressive layering, tapers

Real cuts combine them. A long-layered shape typically uses a stationary interior guide at the top (so every layer returns to one length and the interior stays connected) plus a travelling perimeter guide around the outline. A graduated bob uses a travelling interior with a stationary perimeter . If a question describes a shape and offers guide combinations, work out whether the length must stay the same (stationary) or change progressively (travelling), and whether it applies to the outline (perimeter) or the inside (interior).

The Named Cutting Techniques

These are the techniques the standard lists by name. Sections 5.4 covered point cutting, notching, slicing and slithering; here is the complete set with the ones that were missing.

Technique Tool and action Effect Typical use

Blunt cutting Shears, straight across a section held at even tension Maximum weight and a solid line One-length bobs, strong perimeters

Point cutting Shear tips into the ends, vertically Softens the line without shortening it Almost every finished cut

Chunking Deep, widely spaced notches Bold, visible separation Shags, piecey crops, editorial texture

Slide cutting (slicing) Shears held part-open, slid down the strand Removes weight along the length, blends layers Thick hair, connecting layers

Slithering (effilating) Shears opened and closed in a sliding motion down the strand Tapers to graduated lengths, gentler than slicing Medium-density bulk reduction

Feathering Light point cutting or razor tapering on the very ends Soft, wispy, tapered ends Face-framing, fringes, layered ends

C-shaping Cutting a shallow curved (C-shaped) line rather than a straight one The line follows the curve of the head or the face Face frames, rounded fringes, curved nape lines

Scooping A deeper curved cut, concave through the middle of the line A pronounced inward curve Curved fringes, scooped napes, U-shaped perimeters

Undercutting Removing length or bulk beneath the surface layer Weight comes out; the surface length still covers it Heavy occipital areas, bulk under a bob, shaved-under styles

Disconnection Deliberately leaving two lengths unblended A visible, intentional step Undercuts, editorial and fashion shapes

Two of these are constantly confused and are worth pinning down. Undercutting removes weight from underneath so the surface hair lies flatter and the silhouette narrows — the client still has their length, it just sits closer to the head. Disconnection is the absence of a blend: two lengths meet with no transition, on purpose. An undercut may be disconnected or blended; a disconnection is a design decision, not a mistake, and it must be agreed at consultation because it cannot be blended away without cutting the top length down to the short length.

C-shaping and scooping matter because the head is curved and a straight line drawn across a curve does not read as straight when it is worn. A fringe cut dead-straight across sits shorter at the temples once the hair curves around the head; a shallow C compensates. Scooping is the same idea taken further, and it is how a U-shaped or curved nape is built.

Texturizing (Thinning) Shears

The standard lists texturizing shears among the cutting tools, alongside conventional shears, razors and clippers. They are not interchangeable.

Shear type Teeth Removes Best for

Blending / finishing shear 30-46 fine teeth Roughly 10-20% per pass Softening a line, blending a step, refining a dry cut

  • Texturizing shear 14-28 teeth Roughly 20-40% per pass Reducing bulk in medium to thick hair
  • Chunking shear 5-12 wide teeth Large, visible sections Deliberate separation and piecey texture

Three rules the exam tests:

Stay away from the scalp. Keep thinning shears roughly 5 cm (2 inches) or more from the scalp. Cut closer and the short stubs stand straight up through the surface and never lie down.

Work the underside. Remove bulk from beneath a subsection, not from the surface, or the cut ends flick out through the top and frizz.

Fine hair rarely needs them. Thinning fine hair reveals the sparseness rather than hiding it, and thinning curly hair on the surface destroys the pattern (Section 6.2).

Deciding How Much to Remove — and When to Stop

Performance criterion C-7.03.03P asks you to determine excess hair to be removed according to hair characteristics and desired results , and the standard's list of desired results is short and useful: increased volume, reduced bulk, accentuated effects . Match the technique to the goal rather than reaching for the same tool every time — volume comes from shorter interior layers and root-area support, bulk reduction comes from slicing, slithering and undercutting, and accentuated effects come from chunking, disconnection and feathering.

Then apply C-7.03.10P: manipulate the hair to determine if more customizing is required. Shake it out, push it back, drop it into natural fall, look at the form, and only then decide whether to remove more. Every removal is permanent, so the professional habit is to take less than you think you need, evaluate, and take a second pass if the shape still asks for it. A cut that is slightly under-texturized can be finished in two minutes at the next visit; an over-texturized cut takes months to grow out.

Approximate Bulk Removed Per Pass by Texturizing Tool (%)