Study guide
13.2 Facial & Nape Services: Shaping, Shaving & Facial-Hair Colour
Red Seal Hairstylist Interprovincial Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 How to Use This Guide & Study Strategy
2 Safety, Hygiene & Infection Control
2.1 Cleaning, Sanitizing, Disinfecting & Sterilizing 2.2 WHMIS, SDS & Hazardous Materials 2.3 Maintaining a Safe, Hygienic Work Environment & PPE
3 Tools, Equipment & Client Preparation
3.1 Manual, Electric & Major Equipment Use and Maintenance 3.2 Client Consultation, Service Planning, Draping & Documentation 3.3 Communication, Professionalism & Mentoring Techniques
4 Hair & Scalp Care
4.1 Hair Structure, Growth & Trichology 4.2 Hair & Scalp Analysis (Texture, Density, Porosity, Elasticity) 4.3 Scalp Disorders & Unfavourable Reactions 4.4 Shampooing, Conditioning & Scalp Treatments
5 Cuts Hair: Fundamentals
5.1 Cutting Principles: Elevation, Projection, Design Lines & Tension 5.2 One-Length & Graduated Shapes 5.3 Layering, Over-Direction & Guidelines 5.4 Texturizing & Razor Cutting 5.5 Growth Patterns, Natural Fall & Cutting-Design Interpretation
6 Cuts Hair: Texture, Clipper & Facial/Nape
6.1 Clipper Cutting & Shear-Over-Comb 6.2 Cutting Diverse Hair Textures 6.3 Cutting Facial Hair & Nape (Beard, Moustache, Shaving) 6.4 Sectioning, Head-Shape Analysis & Dry Refinement 6.5 Customizing the Cut: Guideline Types & Named Cutting Techniques
7 Wet Styling & Sets
7.1 Roller Sets & Wet Setting 7.2 Finger Waves & Pin Curls 7.3 Blow-Drying & Airflow Styling 7.4 Freestyle Placement, Wet Styling Aids & the Elements and Principles of Design
8 Thermal Styling & Finishing
8.1 Flat Irons, Curling Irons & Thermal Tool Safety 8.2 Updos & Finishing Products 8.3 Styling with Hair Additions: Foundation, Support & Home-Care Education
9 Chemical Texture: Perming
9.1 Permanent Wave Chemistry: Disulfide Bonds & Waving Lotions 9.2 Perm Wrapping Techniques, Base Placement & End Papers 9.3 Perm Processing, Test Curls, Neutralizing & Rinsing 9.4 Waving Solution Families, Wrap Patterns & Perm Safety Practice
10 Chemical Texture: Relaxing & Safety
10.1 Chemical Relaxing: Lye, No-Lye & Thio 10.2 Soft-Curl & Neutralizing 10.3 Chemical Safety, Strand/Patch Tests & Contraindications 10.4 Smoothing & Re-forming Systems
11 Hair Colour: Theory & Chemistry
11.1 Colour Theory, the Level System & Tone 11.2 Oxidation & Dye Chemistry 11.3 Developers, Lift & the Level System 11.4 Toning & Gray Coverage
12 Hair Colour: Application, Lightening & Correction
12.1 Colouring Virgin & Regrowth Hair, Placement Techniques 12.2 Lightening, Bleach & Decolourization 12.3 Colour Correction: Banding, Fillers & Artificial Colour Removal 12.4 Colour Consultation, Patch & Strand Testing 12.5 Colour Placement Systems: Foiling, Blocking, Freehand & Special Effects
13 Specialized Services
13.1 Hair Extensions, Wigs & Hairpieces 13.2 Facial & Nape Services: Shaping, Shaving & Facial-Hair Colour 13.3 Skin Awareness & Scope of Practice
14 Salon Operations
14.1 Front Desk: Scheduling, Client Interaction & Financial Transactions 14.2 Business Fundamentals: Costs, Pricing & Inventory 14.3 Retailing, Marketing & Professionalism 14.4 Developing a Business Plan: Ownership, Regulation, Finance & Salon Set-Up
15 Final Review & Exam Strategy
15.1 Exam Strategy, Question Types & Test-Taking 15.2 Final Preparation Checklist & Week-Before Plan
13.2 Facial & Nape Services: Shaping, Shaving & Facial-Hair Colour
Key Takeaways Explain This Topic AI
Beard and moustache design is chosen for face shape — round, square, oval, long — and shaped by trimming and edging
Straight-razor shaving uses a blade angle of about 30 degrees, single-use guarded blades or properly sanitized razors, hot towel prep, and lather; never shave over lesions, warts, or active acne
For facial-hair colouring (Task G-17.02), use a product approved for the intended area and follow its allergy-alert, developer, and application instructions; avoid contact with the skin as directed.
Electric trimmers are used for edging and defining lines; they do not require lather and are safer around minor skin irregularities
Task G-17.01 (depilatory facial/nape services) is NOT common core and is excluded from the national Red Seal exam — know it exists but do not study it as testable
Last updated: October 2026
Facial & Nape Services: Shaping, Shaving & Facial-Hair Colour
Quick Answer: This section combines Task C-8 facial/nape cutting , including beard and moustache trimming, straight-razor shaving , and electric trimmer edging , with Task G-17.02 facial-hair colouring and its product-specific allergy-alert, developer, and timing instructions. Task G-17.01 — depilatory facial/nape services — is NOT common core and is excluded from the national exam.
MWA G Task G-17 accounts for 2 of the 6 Specialized Services questions in the 120-question exam. Its testable common-core sub-task is G-17.02 facial-hair colouring ; G-17.01 depilatory services is excluded. C-8.01 trims facial and nape hair and C-8.02 removes facial and nape hair with a straight razor , under Major Work Activity C. The G-17 count must not be applied to the cutting and shaving content combined in this section.
Beard & Moustache Design for Face Shape
Facial hair changes the perceived shape of the face. The goal is balance — a beard can lengthen a round face, narrow a square face, or soften a long face.
- Face Shape Recommended Beard Approach
- Oval Most styles work; keep proportion; avoid anything that over-lengthens
- Round Add length — longer at the chin, shorter on the cheeks; a goatee or pointed chin beard elongates
- Square Soften the jaw — round the corners, medium length, avoid hard square lines; full beard trimmed round
- Long / oblong Add width — fuller on the cheeks, shorter at the chin; avoid long goatees that lengthen further
- Triangular Balance a narrow chin — fuller beard at the chin to widen the lower face
Design also considers the client's growth pattern, density, and any patches. Not every client can grow a full even beard; recommend a style that suits the actual hair, not the wish.
Trimming Facial and Nape Hair
Trimming under Task C-8.01 shapes facial and nape hair to the chosen design.
Comb the beard dry in the direction of growth so you can see true length and any uneven patches.
Set the guard length on the trimmer or use scissors over comb for longer beards.
Work from the ears down to the chin on the cheeks, defining the cheek line.
Shape the chin and jawline to the chosen design, blending into the neckline.
Define the neckline — the bottom edge sits just above the Adam's apple, not on the throat; a common error is cutting the neckline too high, which shortens the face.
Nape hair is trimmed at the hairline to blend into the haircut and the beard, keeping the back of the neck clean.
Straight-Razor Shaving Technique and Safety
A straight-razor (cut-throat) shave is a skilled service. Safety is non-negotiable.
Preparation:
Clean the skin; inspect for contraindications (see below).
Apply a hot towel for 1-2 minutes to soften the hair and open the follicle.
Apply shaving cream or lather and work it into the beard with a brush or fingertips; lather lubricates and lifts the hair.
Blade and angle:
Use a single-use guarded blade changed per client, or a properly sanitized reusable straight razor.
Hold the razor at an angle of about 30 degrees to the skin — steeper causes nicking, shallower drags and pulls.
Shave in the direction of hair growth for the first pass; a second against-the-grain pass is optional only if the skin tolerates it.
Use short, controlled strokes; stretch the skin with the free hand to flatten it.
Contraindications — do not shave over:
- Active acne, pimples, or pustules
- Warts, moles, skin tags, or raised lesions
- Open wounds, cuts, or abrasions
- Active infection (impetigo, cold sores/HSV, ringworm)
- Recent surgery or scarring in the service area
- Severe sunburn or irritated skin
If any of these are present, stop and either avoid that area or refuse the shave and refer when appropriate.
Aftercare:
Rinse with cool water to close the pores.
Apply a soothing aftershave or balm without alcohol to calm the skin.
Inspect for any nicks; apply styptic if needed.
Electric Trimmer Edging
Electric trimmers define the cheek line, jawline, and neckline without lather and with less risk of cutting the skin.
Use a T-blade or detail trimmer for crisp lines.
Hold the trimmer with the blade flat against the skin, edge aligned with the desired line.
Move in short confident strokes; follow the natural jaw and cheek line, not a ruler-straight line.
Trimmers are preferred over razors on clients with minor skin irregularities, because they cut above the skin rather than scraping it.
Facial-Hair Colouring (Task G-17.02)
Colouring facial hair is a separate, testable sub-task. The skin on the face is more sensitive than the scalp, and the hair is coarser, so the approach differs.
Allergy-alert test: choose a colour product specifically permitted for facial hair and follow its instructions, including any required 48-hour test before each use. Do not assume a scalp colour is approved for a beard or that its testing method applies to another product. A clear test does not guarantee no reaction.
Product choice:
Use a product explicitly intended for the facial-hair area being treated. A scalp-only product is not approved for the face by client consent.
Use only the developer, components, and mixing ratio specified for that facial-hair product; there is no universal 5- or 10-volume rule.
Do not improvise a high-lift or bleach mixture for the face. Follow the selected product’s area restrictions and contraindications.
Application:
Apply a barrier cream (petroleum jelly or similar) around the beard and moustache perimeter to prevent skin staining.
Apply colour with a brush, working it into the facial hair; avoid dripping onto the surrounding skin.
Use the product’s full timing instructions, including when to start the timer and any permitted adjustment for resistant hair. Do not shorten the time merely because the hair is on the face.
Remove gently with cool water and a soft towel; do not rub the skin.
Aftercare:
Apply a soothing balm if the skin is slightly irritated.
Advise the client to avoid harsh face products and sun exposure for 24 hours.
Depilatory Services (Task G-17.01) — Excluded from the National Exam
Task G-17.01 covers depilatory facial and nape services (waxing, sugaring, depilatory creams). This sub-task is not common core across provinces and is excluded from the national Red Seal Hairstylist exam. The Red Seal Exam Preparation Guide states plainly that "activities that are Not Common Core will not be tested on the exam," so you should know G-17.01 exists within the Red Seal Occupational Standard, but you should not study depilatory technique, wax temperatures, or depilatory product chemistry as testable content for this exam. If a question appears to be about hair removal in a facial/nape context, the testable answer relates to shaving or trimmer edging, not waxing.
Why This Matters for the Exam
Study cutting, edging, and straight-razor safety under C-8 , and facial-hair colouring under G-17.02 . Colour questions use the selected product’s allergy-alert, developer, and timing instructions. Keep the G-17 question count separate from C-8, and remember that G-17.01 depilatory services are excluded from the national exam.