Study guide

5.5 Fractions, Rational Expressions, and Non-Calculator Computation

CAT-ASVAB Computer Adaptive ASVAB

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CAT-ASVAB Overview, Adaptive Mechanics & Test Strategy

1.1 CAT-ASVAB Architecture, MEPS Administration & Subtest Structure 1.2 Computer Adaptive Testing (CAT), IRT Engine & Pacing Rules 1.3 AFQT Scoring Formula, VE Weighting & Service Branch Minimums 1.4 Military Composite Line Scores & MOS/AFSC/Rating Classification

2 Chapter 2: Word Knowledge (WK)

2.1 Greek and Latin Roots, Prefixes, and Suffixes 2.2 Context Clues, Secondary Meanings, and Nuanced Synonyms 2.3 Military, Technical, and Formal Vocabulary in Context 2.4 High-Frequency Word Bank and the 36-Second Word-Attack Protocol

3 Chapter 3: Paragraph Comprehension (PC)

3.1 Identifying Main Ideas, Central Themes, and Author Purpose 3.2 Supporting Details, Factual Extraction, and Structural Analysis 3.3 Inferences, Contextual Meaning, and Tone Evaluation

4 Chapter 4: Arithmetic Reasoning (AR)

4.1 Translating Complex Word Problems into Algebraic Expressions 4.2 Ratios, Proportions, Rates, and Combined Work Problems 4.3 Percentages, Interest, Profit, and Financial Math 4.4 Applied Geometric Word Problems (Area, Perimeter, Volume)

5 Chapter 5: Mathematics Knowledge (MK)

5.1 Number Properties, Exponents, Radicals, and Polynomials 5.2 Linear Equations, Quadratic Equations, and Inequalities 5.3 Geometric Principles, Coordinate Geometry, and Trigonometry Fundamentals 5.4 Basic Probability, Permutations, Combinations, and Statistics 5.5 Fractions, Rational Expressions, and Non-Calculator Computation

6 Chapter 6: General Science (GS)

6.1 Cellular Biology, Human Anatomy, and Biological Systems 6.2 Chemistry Fundamentals, Atomic Structure, and Reactions 6.3 Classical Physics, Energy, Forces, and Motion 6.4 Earth Science, Meteorology, Astronomy, and Environmental Science 6.5 Scientific Method, Measurement Systems, and Laboratory Instruments

7 Chapter 7: Electronics Information (EI)

7.1 Voltage, Current, Resistance, Ohm's Law, and Power 7.2 Circuit Analysis: Series, Parallel, and Combination Circuits with Kirchhoff's Laws 7.3 Electronic Components, Semiconductor Devices, and Schematic Symbols 7.4 Magnetism, Electromagnetism, Motors, and Generators 7.5 Circuit Protection, Wiring, Measurement Instruments, and Electrical Safety

8 Chapter 8: Auto Information (AI)

8.1 Internal Combustion Engines and the Four-Stroke Cycle 8.2 Powertrain, Transmission, Drivetrain, and Fuel Systems 8.3 Braking Systems, Suspension, Steering, and Electrical Diagnostics

9 Chapter 9: Shop Information (SI)

9.1 Hand Tools, Measuring Instruments, and Cutting Implements 9.2 Power Tools, Fasteners, Hardware, and Joining Techniques 9.3 Woodworking, Metalworking, Materials, and Workshop Safety

10 Chapter 10: Mechanical Comprehension (MC)

10.1 Simple Machines: Levers, Classes, and Mechanical Advantage 10.2 Pulleys, Wheel and Axle Systems, and Inclined Planes 10.3 Gears, Belt and Chain Drives, Cams, and Torque Transmission 10.4 Fluid Power, Hydraulics, Pneumatics, and Buoyancy (Pascal & Archimedes) 10.5 Forces, Friction, Work, Power, Energy Conservation, and Wave Mechanics

11 Chapter 11: Assembling Objects (AO)

11.1 Spatial Relationship Fundamentals & 2D Silhouette Synthesis 11.2 Connection Point Problems, Interior Seams, and Labeled Points 11.3 High-Speed Pacing, Elimination Tactics, and Visual Pattern Recognition

5.5 Fractions, Rational Expressions, and Non-Calculator Computation

Key Takeaways Explain This Topic AI

Adding or subtracting fractions requires a common denominator; multiplying and dividing never does, which is the single most common source of fraction errors.

Dividing by a fraction is multiplying by its reciprocal, and this rule extends unchanged to algebraic rational expressions.

A rational expression is simplified by factoring the numerator and denominator completely and cancelling common factors, never common terms.

Any value that makes a denominator zero is excluded from the domain, and the exam tests this as an explicit restriction.

Complex fractions collapse fastest by multiplying every term in the numerator and denominator by the least common denominator of the inner fractions.

Last updated: August 2026

5.5 Fractions, Rational Expressions, and Non-Calculator Computation

Core Principle: No calculator is permitted anywhere on the ASVAB. Mathematics Knowledge gives you about 124 seconds per scored item , which is generous — but only if fraction arithmetic is automatic. Candidates rarely lose MK points to hard concepts; they lose them to a common denominator applied where it did not belong, or a factor cancelled that was really a term.

1. The Four Fraction Operations

Operation Rule Worked example

Addition Convert to a common denominator, then add numerators only 3 4 + 2 5 = 15 20 + 8 20 = 23 20 \frac{3}{4} + \frac{2}{5} = \frac{15}{20} + \frac{8}{20} = \frac{23}{20} 4 3 ​ + 5 2 ​ = 20 15 ​ + 20 8 ​ = 20 23 ​

Subtraction Same requirement 5 6 − 1 4 = 10 12 − 3 12 = 7 12 \frac{5}{6} - \frac{1}{4} = \frac{10}{12} - \frac{3}{12} = \frac{7}{12} 6 5 ​ − 4 1 ​ = 12 10 ​ − 12 3 ​ = 12 7 ​

Multiplication No common denominator. Multiply straight across, cancelling first 3 8 × 4 9 = 1 2 × 1 3 = 1 6 \frac{3}{8} \times \frac{4}{9} = \frac{1}{2} \times \frac{1}{3} = \frac{1}{6} 8 3 ​ × 9 4 ​ = 2 1 ​ × 3 1 ​ = 6 1 ​

Division Multiply by the reciprocal of the divisor 5 6 ÷ 10 3 = 5 6 × 3 10 = 1 4 \frac{5}{6} \div \frac{10}{3} = \frac{5}{6} \times \frac{3}{10} = \frac{1}{4} 6 5 ​ ÷ 3 10 ​ = 6 5 ​ × 10 3 ​ = 4 1 ​

The number one fraction error on the ASVAB: finding a common denominator before multiplying . It is unnecessary, it wastes 30 seconds, and it usually produces an unreduced answer that does not appear among the options.

Cancel before you multiply. In 3 8 × 4 9 \frac{3}{8} \times \frac{4}{9} 8 3 ​ × 9 4 ​ , the 4 and 8 share a factor of 4, and the 3 and 9 share a factor of 3. Reducing first turns a three-digit multiplication into 1 2 × 1 3 \frac{1}{2} \times \frac{1}{3} 2 1 ​ × 3 1 ​ .

Mixed numbers must be converted before any operation. 3 2 5 = ( 3 × 5 ) + 2 5 = 17 5 3\frac{2}{5} = \frac{(3 \times 5) + 2}{5} = \frac{17}{5} 3 5 2 ​ = 5 ( 3 × 5 ) + 2 ​ = 5 17 ​ . Attempting to multiply mixed numbers directly is a reliable way to generate a wrong answer that still looks plausible.

2. Fraction, Decimal, and Percent Fluency

These conversions appear constantly in both MK and Arithmetic Reasoning, and knowing them cold saves whole minutes.

  • Fraction Decimal Percent Fraction Decimal Percent
  • 1 / 2 1/2 1/2 0.5 50% 1 / 8 1/8 1/8 0.125 12.5%
  • 1 / 3 1/3 1/3 0. 3 ‾ 0.\overline{3} 0. 3 33⅓% 3 / 8 3/8 3/8 0.375 37.5%
  • 2 / 3 2/3 2/3 0. 6 ‾ 0.\overline{6} 0. 6 66⅔% 5 / 8 5/8 5/8 0.625 62.5%
  • 1 / 4 1/4 1/4 0.25 25% 7 / 8 7/8 7/8 0.875 87.5%
  • 3 / 4 3/4 3/4 0.75 75% 1 / 6 1/6 1/6 0.1 6 ‾ 0.1\overline{6} 0.1 6 16⅔%
  • 1 / 5 1/5 1/5 0.2 20% 1 / 9 1/9 1/9 0. 1 ‾ 0.\overline{1} 0. 1 11⅑%

Comparing fractions without decimals — cross multiplication. To decide whether 7 12 \frac{7}{12} 12 7 ​ or 5 9 \frac{5}{9} 9 5 ​ is larger, cross multiply: 7 × 9 = 63 7 \times 9 = 63 7 × 9 = 63 against 5 × 12 = 60 5 \times 12 = 60 5 × 12 = 60 . The larger product sits above the larger fraction, so 7 12 > 5 9 \frac{7}{12} > \frac{5}{9} 12 7 ​ > 9 5 ​ . This takes about four seconds and is exact.

3. Rational Expressions: Fractions with Variables

A rational expression is a quotient of two polynomials, such as x 2 − 9 x 2 + 5 x + 6 \dfrac{x^2 - 9}{x^2 + 5x + 6} x 2 + 5 x + 6 x 2 − 9 ​ . Every fraction rule above carries over unchanged; the only new requirement is that you must factor first .

Simplifying

Factor the numerator completely.

Factor the denominator completely.

Cancel factors that appear in both. x 2 − 9 x 2 + 5 x + 6 = ( x − 3 ) ( x + 3 ) ( x + 2 ) ( x + 3 ) = x − 3 x + 2 \frac{x^2 - 9}{x^2 + 5x + 6} = \frac{(x-3)(x+3)}{(x+2)(x+3)} = \frac{x-3}{x+2} x 2 + 5 x + 6 x 2 − 9 ​ = ( x + 2 ) ( x + 3 ) ( x − 3 ) ( x + 3 ) ​ = x + 2 x − 3 ​

Cancel factors, never terms. In x + 4 4 \dfrac{x + 4}{4} 4 x + 4 ​ you cannot cancel the fours, because the 4 in the numerator is a term joined by addition, not a factor joined by multiplication. Only quantities multiplied across the entire numerator and denominator may be cancelled. This is the most heavily tested trap in the whole topic.

Domain restrictions

Division by zero is undefined , so any value of the variable that makes an original denominator zero is excluded. In the example above, x 2 + 5 x + 6 = ( x + 2 ) ( x + 3 ) x^2 + 5x + 6 = (x+2)(x+3) x 2 + 5 x + 6 = ( x + 2 ) ( x + 3 ) , so x ≠ − 2 x \neq -2 x  = − 2 and x ≠ − 3 x \neq -3 x  = − 3 — and the restriction x ≠ − 3 x \neq -3 x  = − 3 survives even though the ( x + 3 ) (x+3) ( x + 3 ) factor cancelled. Exclusions are read from the expression before simplification.

Multiplying and dividing

Factor everything, invert the divisor if you are dividing, then cancel across the whole product: x 2 − 4 x + 5 ÷ x + 2 2 x + 10 = ( x − 2 ) ( x + 2 ) x + 5 × 2 ( x + 5 ) x + 2 = 2 ( x − 2 ) \frac{x^2 - 4}{x + 5} \div \frac{x + 2}{2x + 10} = \frac{(x-2)(x+2)}{x+5} \times \frac{2(x+5)}{x+2} = 2(x-2) x + 5 x 2 − 4 ​ ÷ 2 x + 10 x + 2 ​ = x + 5 ( x − 2 ) ( x + 2 ) ​ × x + 2 2 ( x + 5 ) ​ = 2 ( x − 2 )

Adding and subtracting

Here a common denominator is required, exactly as with numeric fractions: 3 x + 2 x + 1 = 3 ( x + 1 ) x ( x + 1 ) + 2 x x ( x + 1 ) = 3 x + 3 + 2 x x ( x + 1 ) = 5 x + 3 x ( x + 1 ) \frac{3}{x} + \frac{2}{x+1} = \frac{3(x+1)}{x(x+1)} + \frac{2x}{x(x+1)} = \frac{3x + 3 + 2x}{x(x+1)} = \frac{5x+3}{x(x+1)} x 3 ​ + x + 1 2 ​ = x ( x + 1 ) 3 ( x + 1 ) ​ + x ( x + 1 ) 2 x ​ = x ( x + 1 ) 3 x + 3 + 2 x ​ = x ( x + 1 ) 5 x + 3 ​

When subtracting, distribute the minus sign across the entire second numerator . Writing a − b + c d \frac{a - b + c}{d} d a − b + c ​ where the intended value was a − ( b + c ) d \frac{a - (b + c)}{d} d a − ( b + c ) ​ is the second most common error in this topic.

4. Complex Fractions

A complex fraction has fractions inside its numerator, its denominator, or both. Two reliable methods exist; the second is faster.

Method 1 — treat the main bar as division: 2 3 4 9 = 2 3 ÷ 4 9 = 2 3 × 9 4 = 3 2 \frac{\frac{2}{3}}{\frac{4}{9}} = \frac{2}{3} \div \frac{4}{9} = \frac{2}{3} \times \frac{9}{4} = \frac{3}{2} 9 4 ​ 3 2 ​ ​ = 3 2 ​ ÷ 9 4 ​ = 3 2 ​ × 4 9 ​ = 2 3 ​

Method 2 — multiply top and bottom by the LCD of the inner fractions. For 1 + 1 x 1 − 1 x 2 \frac{1 + \frac{1}{x}}{1 - \frac{1}{x^2}} 1 − x 2 1 ​ 1 + x 1 ​ ​

the inner LCD is x 2 x^2 x 2 . Multiplying every term above and below by x 2 x^2 x 2 clears all inner fractions at once: x 2 + x x 2 − 1 = x ( x + 1 ) ( x − 1 ) ( x + 1 ) = x x − 1 \frac{x^2 + x}{x^2 - 1} = \frac{x(x+1)}{(x-1)(x+1)} = \frac{x}{x-1} x 2 − 1 x 2 + x ​ = ( x − 1 ) ( x + 1 ) x ( x + 1 ) ​ = x − 1 x ​

Method 2 scales to expressions with three or four inner fractions where Method 1 becomes unmanageable.

5. Non-Calculator Arithmetic Shortcuts

Shortcut Rule Example

Multiply by 5 Multiply by 10, halve it 48 × 5 = 480 ÷ 2 = 240 48 \times 5 = 480 \div 2 = 240 48 × 5 = 480 ÷ 2 = 240

Divide by 5 Double it, divide by 10 340 ÷ 5 = 680 ÷ 10 = 68 340 \div 5 = 680 \div 10 = 68 340 ÷ 5 = 680 ÷ 10 = 68

Multiply by 25 Multiply by 100, divide by 4 36 × 25 = 3600 ÷ 4 = 900 36 \times 25 = 3600 \div 4 = 900 36 × 25 = 3600 ÷ 4 = 900

Squares near 50 ( 50 ± n ) 2 = 2500 ± 100 n + n 2 (50 \pm n)^2 = 2500 \pm 100n + n^2 ( 50 ± n ) 2 = 2500 ± 100 n + n 2 53 2 = 2500 + 300 + 9 = 2809 53^2 = 2500 + 300 + 9 = 2809 5 3 2 = 2500 + 300 + 9 = 2809

Difference of squares a 2 − b 2 = ( a − b ) ( a + b ) a^2 - b^2 = (a-b)(a+b) a 2 − b 2 = ( a − b ) ( a + b ) 41 2 − 39 2 = 2 × 80 = 160 41^2 - 39^2 = 2 \times 80 = 160 4 1 2 − 3 9 2 = 2 × 80 = 160

Percent swap a % a\% a % of b b b equals b % b\% b % of a a a 16% of 25 = 25% of 16 = 4

Estimate before you compute. If an item asks for 7 8 \frac{7}{8} 8 7 ​ of 512 and the options are 56, 448, 512, and 576, you know instantly that the answer is slightly below 512 — only 448 qualifies, and you never had to multiply. On a no-calculator test, checking the magnitude of your answer against the option spread is the cheapest error-detection tool you have.