Study guide

8.2 Straight-Line & Units-of-Production Methods

Certified Bookkeeper CB

Track your progress as you read

Finished sections get a check mark.

1 Introduction & The Certified Bookkeeper Program

1.1 The AIPB CB Credential, Exam Structure & Requirements 1.2 The Bookkeeping Accounting Cycle & Core Principles

2 Adjusting Entries — Accruals & Deferrals

2.1 Accrual vs Cash Basis & Timing of Adjustments 2.2 Accrued Revenue & Receivables 2.3 Accrued Expenses & Accrued Liabilities 2.4 Deferred Revenue & Unearned Income

3 Adjusting Entries — Prepaids, Estimates & Adjusted Trial Balance

3.1 Prepaid Expenses & Deferred Costs 3.2 Bad Debt & Allowance for Doubtful Accounts 3.3 Accrued Interest, Depreciation Adjustments & Other Estimates 3.4 From the Unadjusted Trial Balance to the Financial Statements

4 Error Detection & Bank Reconciliation

4.1 Where Bookkeeping Errors Occur & How to Find Them 4.2 Using the Trial Balance to Locate Discrepancies 4.3 The Monthly Bank Reconciliation & Reconciling Journal Entries

5 Correcting Accrual & Deferral Accounting Errors

5.1 Correcting Current-Period Accrual Errors 5.2 Correcting Current-Period Deferral Errors 5.3 Financial Statement Impact of Uncorrected Errors

6 Payroll Fundamentals, Worker Classification & Withholding

6.1 Employees vs Independent Contractors 6.2 Federal vs State Wage-Hour Laws & FLSA Overtime 6.3 Required Payroll Records, Form W-4 & State Withholding 6.4 Employee FIT, FICA Withholding & When Wages Are Taxable

7 Employer Payroll Taxes, Compliance Filings & Accounting Entries

7.1 Employer FICA Match, FUTA & SUTA 7.2 Tax Deposit Schedules & Forms 941, 940, W-2 & W-3 7.3 Other Federal and State Payroll Requirements 7.4 Payroll Accounting & Journal Entries

8 GAAP Depreciation Methods & Asset Disposals

8.1 Book vs Tax Depreciation, Capitalization & Cost Basis 8.2 Straight-Line & Units-of-Production Methods 8.3 Declining-Balance & Sum-of-the-Years’-Digits 8.4 Partial-Year Depreciation & Fixed Asset Disposals

9 Tax Depreciation: MACRS, Section 179 & Business Vehicles

9.1 MACRS Cost Recovery: Asset Classes, Conventions & IRS Tables 9.2 Section 179 Expensing & Bonus Depreciation Rules 9.3 Listed Property, Passenger Automobiles & Commercial Vehicles

10 Inventory Systems, Transactions & FIFO Costing

10.1 Merchandise Inventory, Cost Elements, FOB Terms & Title 10.2 The Perpetual Inventory Method & Transaction Entries 10.3 The Periodic Inventory Method, Inventory Equation & Closing Entries 10.4 First-In, First-Out (FIFO) Cost Flow

11 LIFO, Average Costing & Inventory Valuation

11.1 Last-In, First-Out (LIFO), Layers & Liquidation 11.2 Weighted-Average & Moving-Average Cost Methods 11.3 Lower of Cost or Net Realizable Value (LCNRV) & Shrinkage

12 Internal Controls Framework & Employee Theft Prevention

12.1 Internal Control Objectives, Segregation of Duties & Noncash Asset Theft 12.2 Cash Controls: Receipts, Disbursements & Petty Cash 12.3 Pre-Employment Screening, Theft Red Flags & Fidelity Bonds

13 Banking, Payment Fraud & Vendor Scam Prevention

13.1 Check Fraud, Positive Pay & Bank Protection 13.2 Credit Card Security & Electronic Payment Controls 13.3 Vendor Billing Schemes, Kickbacks, Procurement Controls & Con Schemes

8.2 Straight-Line & Units-of-Production Methods

Key Takeaways Explain This Topic AI

Straight-line annual depreciation equals (cost − salvage) ÷ useful life in years; Harbor Kitchen Supply’s $47,000 mixer with $5,000 salvage and a 6-year life yields $7,000 per full year.

Units-of-production depreciation equals (cost − salvage) ÷ total estimated units, then multiplied by units this period; a $52,000 press with $4,000 salvage and 80,000 lifetime units costs $0.60 per unit.

Straight-line produces a constant annual expense if the asset is in service the whole year; units-of-production fluctuates with actual output and is zero in an idle year.

Neither method depreciates below salvage: leftover depreciable base, not extra units or an extra year, caps the last period.

A change in useful life or salvage is applied prospectively to remaining book value; prior years are not restated.

Last updated: September 2026

Straight-line: even allocation of depreciable base

Straight-line (SL) is the default book method for many small businesses because it is easy to schedule, easy to explain to an owner, and acceptable under U.S. GAAP when the asset’s service is roughly even over time. AIPB’s Mastering Depreciation treats it as its own workbook section: compute, allocate, journalize, and maintain the schedule.

Annual SL depreciation = (Cost − Salvage) ÷ Useful life in years

Harbor Kitchen Supply’s mixer from section 8.1:

  • Cost $47,000
  • Salvage $5,000
  • Life 6 years
  • Depreciable base $42,000
  • Full-year expense $42,000 ÷ 6 = $7,000

Monthly books often take $7,000 ÷ 12 = $583.33 (round consistently; this guide keeps cents only when a monthly convention needs them, and dollars when the problem is annual). Partial-year fractions are section 8.4.

Six-year straight-line schedule (in service 1 January Year 1, full years)

  • Year Depreciation expense Accumulated depreciation Book value (cost − accum)
  • 0 (acquisition) — $0 $47,000
  • 1 $7,000 $7,000 $40,000
  • 2 $7,000 $14,000 $33,000
  • 3 $7,000 $21,000 $26,000
  • 4 $7,000 $28,000 $19,000
  • 5 $7,000 $35,000 $12,000
  • 6 $7,000 $42,000 $5,000 salvage

Check the last row: accumulated depreciation equals the $42,000 base, not the $47,000 cost. Book value rests on salvage. If someone posts a seventh $7,000, they have depreciated through salvage — a fail on a Prometric item.

Office / selling equipment journal entry (annual):

  • Dr Depreciation Expense 7,000
  • Cr Accumulated Depreciation—Equipment 7,000

Factory equipment: debit Manufacturing Overhead $7,000 instead of Depreciation Expense so the cost can attach to production.

Common SL errors

Dividing cost by life and skipping salvage: $47,000 ÷ 6 = $7,833.33, which overstates expense and drives book value below the $5,000 floor by Year 6.

Dividing depreciable base by life minus one “because salvage is the last year.”

Crediting Equipment instead of Accumulated Depreciation, which hides historical cost.

Change in estimate (prospective only)

At the start of Year 3, Harbor’s mixer has book value $33,000 (after two $7,000 years). Management now expects $3,000 salvage and 6 remaining years (the machine will be kept longer). New annual SL =

($33,000 − $3,000) ÷ 6 = $5,000

Years 1–2 stay $7,000 each. No retroactive restatement. Exam items that ask you to “fix” Year 1 after a Year 3 revision are testing whether you know changes in estimate are prospective .

Units-of-production: allocate by actual use

Units-of-production (UOP) (also called units-of-activity) matches expense to output, hours, or miles when wear tracks use better than calendar time. A seasonal press that runs 20,000 units one year and 4,000 the next should not show the same depreciation both years.

  • Depreciation per unit = (Cost − Salvage) ÷ Total estimated lifetime units
  • This period’s UOP depreciation = Per-unit rate × Units this period

Cedar & Pine Bakery installs an industrial press:

  • Cost $52,000
  • Salvage $4,000
  • Estimated lifetime output 80,000 units
  • Depreciable base $48,000
  • Rate $48,000 ÷ 80,000 = $0.60 per unit

Year 1 actual output 12,000 units → 12,000 × $0.60 = $7,200 .

Five-year units-of-production schedule

  • Year Units produced Depreciation ($0.60 × units) Accumulated depreciation Book value
  • 1 12,000 $7,200 $7,200 $44,800
  • 2 18,000 $10,800 $18,000 $34,000
  • 3 15,000 $9,000 $27,000 $25,000
  • 4 20,000 $12,000 $39,000 $13,000
  • 5 15,000 $9,000 $48,000 $4,000 salvage
  • Total 80,000 $48,000

If Year 5 had produced 20,000 units, 20,000 × $0.60 = $12,000 would exceed remaining depreciable base of $13,000 − $4,000 = $9,000 . Record only $9,000 , not $12,000. UOP never takes more than the unused base. If the press is idle (zero units), UOP depreciation is $0 that period — unlike straight-line, which still runs with the calendar.

If lifetime units are revised, recompute a new per-unit rate from remaining depreciable book value (cost − accum dep − current salvage) divided by remaining estimated units. Apply the new rate going forward.

UOP journal entry uses the same accounts as SL; only the dollar amount changes with output. Factory presses still hit overhead; a delivery van’s UOP-by-miles for a nonmanufacturer hits Depreciation Expense.

UOP errors

Forgetting salvage in the per-unit rate: $52,000 ÷ 80,000 = $0.65, then 12,000 × $0.65 = $7,800 for Year 1 (too high).

Stopping after the per-unit rate and calling $0.60 the year’s expense.

Using this year’s units in the denominator ($48,000 ÷ 12,000) as if the asset would die after one season.

Choosing SL versus UOP on the books

  • Question Straight-line Units-of-production
  • What drives wear? Time (even service) Output, hours, or miles
  • Idle year Still records a full-year (or partial-year) amount Records $0 if units are 0
  • Schedule shape Flat annual expense Peaks with busy years
  • Salvage Subtracted in the annual formula Subtracted in the per-unit formula

Typical CB items Buildings, office furniture, even-use equipment Machines with hour meters, vehicles with odometers, stamping presses

You may use SL on the building and UOP on the press in the same entity. Consistency for each class of asset is the bookkeeping virtue; switching methods for a single asset is a change in accounting estimate effected by a change in principle and is not a casual journal-entry tweak.

Building and maintaining the depreciation schedule

A usable book schedule, whether a spreadsheet or a fixed-asset module, needs at least: asset ID, description, acquisition date, capitalized cost, salvage, life or lifetime units, method, current-year expense, accumulated depreciation, and book value. AIPB’s workbook emphasizes keeping the schedule so the year-end adjusting entry is a lookup, not a reconstruction from memory. When an asset is added mid-year, the schedule’s first-year column is a fraction (section 8.4), not a silent full $7,000.

  • Traps
  • Calling UOP “straight-line per unit” and then still dividing by years

Taking a full SL year on an asset placed in service in November (unless a half-year book policy says so — and then you must apply that policy, not invent MACRS)

  • Letting accumulated depreciation exceed cost minus salvage
  • Restating prior-year SL after a life revision
  • Posting factory SL to Depreciation Expense when the problem is a manufacturer