Study guide

3.3 Tissue & Thumb Forceps

CBSPD CSIS Certified Surgical Instrument Specialist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CSIS Exam & Care of Surgical Instruments

1.1 CSIS Exam Blueprint, Eligibility & Logistics 1.2 Instrument Composition & Finish 1.3 Grades of Stainless Steel 1.4 Methods to Prevent Instrument Damage

2 Chapter 2: Instrument Anatomy & Naming Conventions

2.1 Anatomy of an Instrument: Jaws, Shanks & Box Locks 2.2 Instrument Naming Conventions & Classification

3 Chapter 3: General Instruments — Identification by Proper Name

3.1 Hemostatic Clamps 3.2 Grasping & Holding Instruments 3.3 Tissue & Thumb Forceps 3.4 Scissors & Other Cutting Instruments 3.5 Needle Holders & Suturing Instruments 3.6 Suction, Dilators, Probes & Accessory Instruments

4 Chapter 4: Retractors, Endoscopic, Robotic & Powered Systems

4.1 Handheld Retractors 4.2 Self-Retaining & Table-Mounted Retractors 4.3 Laparoscopic Instruments & Accessories 4.4 Robotic Instruments & Accessories 4.5 Navigational Systems & Their Instrumentation 4.6 Surgical Instrument Tracking Systems 4.7 Powered Surgical Equipment

5 Chapter 5: Specialty Instrument Sets

5.1 Orthopedic Instruments: Trauma 5.2 Orthopedic Instruments: Total Joints 5.3 Neurosurgical Instruments 5.4 Vascular & Cardiovascular-Thoracic Instruments 5.5 ENT & Dental Instruments 5.6 GU & GYN Instruments 5.7 Plastic & Microsurgical Instruments

6 Chapter 6: Components, Assembly & Configuration of Individual Sets

6.1 Instrument Make-Up for Various Sets 6.2 Count Sheets, Names & Set Configuration 6.3 Assembly Mechanics: Stringers, Protection & Weight

7 Chapter 7: Instrument Inspection & Safety Testing

7.1 Inspection for Cleanliness: Frequency 7.2 Inspection for Cleanliness: Methods 7.3 Staining, Spotting & Corrosion Identification 7.4 Testing Scissors 7.5 Testing Hinged Instruments: Box Locks & Ratchets 7.6 Testing Forceps & Clamps 7.7 Testing Needle Holders 7.8 Inspection & Testing of Laparoscopic Instruments 7.9 Insulation Inspection: Frequency 7.10 Insulation Testing: Methods

8 Chapter 8: Instrument Marking & Specialty Device Inspection

8.1 Acceptable Instrument Identification & Marking Methods 8.2 Correct Application of Instrument Marking Tape 8.3 Maintenance of Marking Methods 8.4 Inspection of Rigid & Semi-Rigid Scopes 8.5 Inspection of Flexible Scopes 8.6 Inspection of Robotic Instruments 8.7 Inspection & Testing of Power Equipment 8.8 Inspection of Harmonic Scalpels & Advanced Energy Devices 8.9 Inspection of Cameras, Light Cords & Optics 8.10 Inspection of Stereotactic Sets 8.11 Inspection of Sigmoidoscope Sets 8.12 Removal From Service, Repair & Replace Decisions

9 Chapter 9: Loaner & Implant Sets and Components

9.1 Loaner Program Fundamentals & Receipt 9.2 Inspection of Loaner Instruments 9.3 Testing of Loaner Instruments 9.4 Set Configuration of Loaner Instruments 9.5 Documentation Process for Loaner & Implant Sets

10 Chapter 10: Ethics in Surgical Instrument Processing

10.1 Professional Ethics & Accountability 10.2 Ethics of Cleanliness 10.3 Ethics of Functionality 10.4 Correct Instrument on the Set 10.5 Completeness of Sets 10.6 Reporting Instrument Damage & Abuse

3.3 Tissue & Thumb Forceps

Key Takeaways Explain This Topic AI

Thumb forceps are spring instruments without ratchets, identified by tip pattern: smooth, serrated, toothed 1x2 or 2x3, or DeBakey atraumatic rows.

Adson forceps have a wide proximal grip narrowing to a fine tip and come with teeth for skin or without teeth for delicate handling.

DeBakey forceps carry fine longitudinal double rows of atraumatic teeth and are the standard vascular and thoracic tissue forceps.

Bayonet forceps step laterally so the surgeon's hand does not obstruct the view down a narrow channel in neuro and nasal work.

Thumb forceps are inspected by closing the tips and holding to light — the teeth must interdigitate and the tips must meet without gap or overlap.

Last updated: August 2026

The Spring Form

A thumb forceps (called "pick-ups" at the field) is two arms joined at a proximal spring. There is no box lock and no ratchet; the instrument opens by its own spring tension and closes under the surgeon's thumb and index finger. Identification therefore rests almost entirely on tip pattern and on overall shape .

Tip Patterns

  • Tip pattern Description Typical use
  • Smooth Flat or lightly cross-hatched faces, no teeth Handling dressings, delicate tissue, packing
  • Serrated Fine cross-serrations General tissue handling
  • Toothed 1x2 One tooth on one side interlocking between two on the other Skin and dense connective tissue
  • Toothed 2x3, 3x4 Progressively more teeth Heavier fascia and tough tissue
  • DeBakey atraumatic Fine longitudinal double rows with a shallow groove Vascular, cardiac, thoracic, bowel
  • Cupped / spoon Concave tips Delicate tissue and grafts
  • Micro / jeweler's Needle-fine tips numbered 3, 5, 7 Microsurgery, ophthalmic
  • The Named Patterns

Adson. A short forceps (usually 4¾ in) with a broad proximal grip that narrows sharply to a fine tip . That taper is the identifying silhouette. Adson comes as Adson with teeth (1x2, used on skin closure) and Adson dressing/tissue forceps without teeth. The Adson-Brown variant carries multiple fine intermeshing teeth (typically 7x7 or 9x9) in a broad tip and is a plastics and delicate-tissue favourite.

DeBakey. Long, slim, with the characteristic fine double row of atraumatic teeth and a central groove. Available from about 6 to 12 inches. Any set involving a vessel or bowel anastomosis will carry them. The rows are shallow and easily flattened, so DeBakeys must never be used as a general grasper and never used to hold a needle.

Russian. Distinctive round, star-shaped serrated tip that flares outward. Used to grasp tissue with a broad, non-slip grip in GYN and general work.

Ferris-Smith. Heavy, broad, toothed tissue forceps used on fascia and dense tissue.

Gerald. Fine, long, slender forceps with either serrated or toothed tips, common in neuro and cardiovascular sets.

Cushing. Long forceps, straight or bayonet , with or without teeth, standard in neurosurgery.

Bayonet. Not a tip pattern but a shape : the shafts step laterally out of the line of the tips so the surgeon's hand does not block the view down a nasal cavity, an ear canal, or a craniotomy corridor. Bayonet forceps appear across ENT and neuro sets and are often also bipolar electrosurgical forceps.

Bipolar forceps. A bayonet or straight forceps wired as an electrode pair; the current passes only between the two tips. Identified by the insulated shafts and the cord connector. These are inspected as insulated instruments (Chapter 7), and their tips are checked for char build-up and non-stick coating loss .

Choosing By Tissue

The governing rule: the more delicate and the more it must survive, the fewer teeth.

Skin being closed → toothed (Adson with teeth): the teeth grip the dermis without crushing a wide area.

Vessel or bowel → DeBakey: atraumatic rows distribute pressure.

Dressings and packing → smooth dressing forceps.

Fascia → Ferris-Smith or heavy toothed.

Cornea or nerve → micro/jeweler's with a specified tip number.

Inspecting Thumb Forceps

The standard test is quick and is expected knowledge:

Hold the forceps up to a light source and close the tips gently with the fingers .

Toothed patterns: the teeth must interdigitate , meshing fully with no gap and no tooth riding over its neighbour.

Smooth and serrated patterns: the tip faces must meet flush with no light visible between them and no lateral overlap.

DeBakey patterns: examine the double rows under magnification — flattened, polished, or missing rows mean the forceps has been misused and no longer holds tissue.

Spring: release and confirm the arms return fully open. A forceps that stays closed or opens weakly has a fatigued or bent spring.

Alignment: sight down the length; the arms must be in the same plane, with tips neither crossed nor splayed.

A forceps that fails alignment is a repair item — tips can usually be realigned and re-teethed by a vendor — but it must be removed from the set at inspection, not sent back to the OR to "see if the surgeon minds."

Tooth Notation and What the Numbers Mean

Thumb forceps are catalogued using a notation that appears verbatim on count sheets, and misreading it produces a genuine assembly error. The notation 1x2 means one tooth on one jaw meeting two teeth on the opposing jaw; the single tooth seats between the pair, interlocking to hold tissue securely. 2x3 follows the same logic with more teeth and a broader hold. A designation such as 9x9 describes multiple fine interdigitating teeth across the tip, as found on Adson-Brown forceps, which spread grip across many small points and are correspondingly gentler on skin edges.

"With teeth" and "without teeth" are therefore not interchangeable descriptions of the same item — they are separate catalogue numbers. A tray calling for Adson with teeth and one calling for Adson without teeth (dressing pattern, with serrations only) are different instruments, and substituting one for the other is precisely the kind of error the Ethics domain asks about.

Dressing, Tissue and Specialty Patterns

The plain dressing forceps has serrated but untoothed tips and is used to handle dressings, packing, and sponges rather than to grasp living tissue. Tissue forceps carry teeth. The distinction matters clinically because a toothed forceps used on a dressing is wasteful, and an untoothed forceps used on skin requires crushing pressure to hold, which damages the wound edge.

Among the named patterns, Adson forceps are short with a wide, comfortable thumb platform narrowing to a fine tip, designed for skin closure. DeBakey forceps carry the distinctive fine longitudinal serrations with a central ridge that grips vessels without crushing them, and are the definitive atraumatic vascular pattern. Russian forceps end in a broad, round, star-patterned tip that grips over a wide area. Bonney and Ferris-Smith are heavy toothed forceps for fascia. Gerald forceps are long and delicate for fine work, and Cushing forceps appear on neurosurgical trays with fine teeth and a bayonet shape.

Bayonet Shape and Why It Exists

Several patterns — Cushing, Jansen, and many ENT and neurosurgical forceps — are made in a bayonet configuration, where the shafts step laterally before running out to the tips. This is not decoration: the offset moves the surgeon's hand out of the line of sight and out of the path of a microscope or speculum, so the tips remain visible in a deep, narrow field. When inspecting bayonet forceps, sight down the instrument to confirm the tips still meet, because the offset makes misalignment easy to miss from directly above.