Study guide
5.5 ENT & Dental Instruments
CBSPD CSIS Certified Surgical Instrument Specialist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The CSIS Exam & Care of Surgical Instruments
1.1 CSIS Exam Blueprint, Eligibility & Logistics 1.2 Instrument Composition & Finish 1.3 Grades of Stainless Steel 1.4 Methods to Prevent Instrument Damage
2 Chapter 2: Instrument Anatomy & Naming Conventions
2.1 Anatomy of an Instrument: Jaws, Shanks & Box Locks 2.2 Instrument Naming Conventions & Classification
3 Chapter 3: General Instruments — Identification by Proper Name
3.1 Hemostatic Clamps 3.2 Grasping & Holding Instruments 3.3 Tissue & Thumb Forceps 3.4 Scissors & Other Cutting Instruments 3.5 Needle Holders & Suturing Instruments 3.6 Suction, Dilators, Probes & Accessory Instruments
4 Chapter 4: Retractors, Endoscopic, Robotic & Powered Systems
4.1 Handheld Retractors 4.2 Self-Retaining & Table-Mounted Retractors 4.3 Laparoscopic Instruments & Accessories 4.4 Robotic Instruments & Accessories 4.5 Navigational Systems & Their Instrumentation 4.6 Surgical Instrument Tracking Systems 4.7 Powered Surgical Equipment
5 Chapter 5: Specialty Instrument Sets
5.1 Orthopedic Instruments: Trauma 5.2 Orthopedic Instruments: Total Joints 5.3 Neurosurgical Instruments 5.4 Vascular & Cardiovascular-Thoracic Instruments 5.5 ENT & Dental Instruments 5.6 GU & GYN Instruments 5.7 Plastic & Microsurgical Instruments
6 Chapter 6: Components, Assembly & Configuration of Individual Sets
6.1 Instrument Make-Up for Various Sets 6.2 Count Sheets, Names & Set Configuration 6.3 Assembly Mechanics: Stringers, Protection & Weight
7 Chapter 7: Instrument Inspection & Safety Testing
7.1 Inspection for Cleanliness: Frequency 7.2 Inspection for Cleanliness: Methods 7.3 Staining, Spotting & Corrosion Identification 7.4 Testing Scissors 7.5 Testing Hinged Instruments: Box Locks & Ratchets 7.6 Testing Forceps & Clamps 7.7 Testing Needle Holders 7.8 Inspection & Testing of Laparoscopic Instruments 7.9 Insulation Inspection: Frequency 7.10 Insulation Testing: Methods
8 Chapter 8: Instrument Marking & Specialty Device Inspection
8.1 Acceptable Instrument Identification & Marking Methods 8.2 Correct Application of Instrument Marking Tape 8.3 Maintenance of Marking Methods 8.4 Inspection of Rigid & Semi-Rigid Scopes 8.5 Inspection of Flexible Scopes 8.6 Inspection of Robotic Instruments 8.7 Inspection & Testing of Power Equipment 8.8 Inspection of Harmonic Scalpels & Advanced Energy Devices 8.9 Inspection of Cameras, Light Cords & Optics 8.10 Inspection of Stereotactic Sets 8.11 Inspection of Sigmoidoscope Sets 8.12 Removal From Service, Repair & Replace Decisions
9 Chapter 9: Loaner & Implant Sets and Components
9.1 Loaner Program Fundamentals & Receipt 9.2 Inspection of Loaner Instruments 9.3 Testing of Loaner Instruments 9.4 Set Configuration of Loaner Instruments 9.5 Documentation Process for Loaner & Implant Sets
10 Chapter 10: Ethics in Surgical Instrument Processing
10.1 Professional Ethics & Accountability 10.2 Ethics of Cleanliness 10.3 Ethics of Functionality 10.4 Correct Instrument on the Set 10.5 Completeness of Sets 10.6 Reporting Instrument Damage & Abuse
5.5 ENT & Dental Instruments
Key Takeaways Explain This Topic AI
ENT sets are dominated by small bayonet and angled instruments, specula, and micro-ear instruments that require magnified inspection.
Nasal specula such as Vienna and Killian are identified by blade length and are inspected for parallel blades and a functioning spreading screw.
Sinus instrumentation includes Blakesley and Takahashi forceps and angled curettes, and their fine hinges are a chronic residual-soil site.
Dental and oral-maxillofacial sets include elevators, forceps numbered by tooth position, rongeurs, and fixation plating instrumentation.
Micro-ear instruments are stored in dedicated tip-protected racks and are among the most easily damaged instruments in the department.
Last updated: August 2026
What Unites ENT and Dental Sets
Both specialties work in small, confined, contaminated cavities . The consequences are consistent: instruments are short and angled or bayoneted , tips are fine and easily bent , hinges are tiny and hard to clean , and the surgical field carries a high bioburden. Instruments in these sets fail inspection more often for bent tips and residual soil than for wear.
Ear Instrumentation
- Instrument Notes
- Ear specula (Farrior, Boucheron) Graduated diameters; inspected for a smooth, unburred rim
- Micro-ear instruments (picks, curettes, hooks, elevators) Sized and angled; inspected under magnification
- Rosen needle, House curette, Bellucci scissors Micro-instruments for stapes and middle ear
- Alligator forceps (Hartmann) Long shaft with a small jaw actuated at an angle; used to grasp in the canal
- Suction tips (Baron, Rosen) Very fine lumens with a thumb port and a stylet
- Myringotomy knife, tube inserter Fine sharps
- Mastoid retractors, Lempert elevator, mastoid curettes Bone work
Baron suctions are the ear equivalent of the Frazier: tiny French sizes (usually 3, 5, 7 Fr), a thumb port, and a stylet that is a countable component. Their lumens are the smallest in routine use and require correspondingly fine brushes and diligent verification.
Alligator forceps are a chronic cleaning problem. The actuating rod runs the length of the shaft to a tiny distal jaw, and the mechanism is enclosed. They must be cleaned with the jaw actuated and, where the design permits, disassembled.
Nasal and Sinus Instrumentation
- Instrument Notes
- Vienna / Killian nasal speculum Two blades opened by a spreading screw; Killian has longer blades
- Bayonet forceps (Lucae, Jansen) Packing and grasping in the nasal cavity
- Freer, Cottle elevators and knives Septal work; double-ended, fine edges
- Blakesley (Blakesley-Wilde) forceps Straight and upturned cutting/grasping forceps for sinus tissue
- Takahashi forceps Fine, delicate through-cutting sinus forceps
- Sinus curettes and seekers (Van Buren, Coakley) Angled
- Antrum punch (Ostrum) Punches the maxillary antrum
- Nasal rongeurs, Jansen-Middleton septal forceps Bone and cartilage
- Microdebrider handpiece and blades Powered, usually single-use blades
- Rigid sinus endoscopes 0°, 30°, 45°, 70°
Nasal specula inspection: the blades must be parallel and equal in length , the spreading screw must turn freely through full travel, and the blade edges must be smooth. A speculum whose blades cross or splay tears mucosa.
Blakesley and Takahashi forceps have fine box locks and long thin shafts with an actuating linkage. They are inspected for tip alignment under magnification , for through-cutting sharpness where applicable, and for smooth full-travel actuation — and they are a documented residual-soil risk that justifies routine cleaning verification.
Throat, Airway and Head/Neck
- Instrument Notes
- Mouth gags (Crowe-Davis, Dingman, McIvor) Frame plus interchangeable tongue blades; blades are counted by size
- Tonsil instruments (Schnidt/tonsil forceps, tonsil snare, Fisher knife, Hurd dissector)
- Adenoid curettes (Barnhill, LaForce) Sized
- Laryngoscopes Blade and handle; light source verified
- Tracheostomy instruments (Trousseau dilator, tracheal hook)
- Thyroid instruments (Lahey tenaculum, Green retractor)
Mouth gag frames carry interchangeable tongue blades in graded widths and lengths — a set with the frame but not the blade the surgeon needs is incomplete, and the blades are frequently separated from their frames in storage.
Dental and Oral-Maxillofacial
- Group Instruments
- Extraction Dental extraction forceps numbered by tooth position (upper/lower, anterior/molar); root tip picks
- Elevators Straight (Cryer, Potts) and periosteal elevators (Molt, Freer)
- Bone Rongeurs, bone files, chisels, mallets, surgical burs
- Retraction Minnesota, Austin, Weider retractors
Fixation (OMF) Maxillomandibular fixation wires and arch bars, plating sets with drills, screwdrivers, plate benders and cutters
Impression / restorative Mirrors, explorers, scalers, curettes
Dental extraction forceps are numbered , and the number designates the tooth and arch the forceps is shaped for. It is an identification convention unique to this specialty and must be verified against the count sheet — an unreadable number makes the instrument unusable in practice.
OMF plating sets behave like miniature trauma sets: tiny screws in caddies, matched drills and taps, screwdrivers with retaining sleeves, and plate benders and cutters. Screw caddies are counted position by position and the screws are extremely easy to lose.
Inspection Priorities for ENT and Dental
Magnified inspection of every micro-tip, pick, curette, and fine forceps.
Tip alignment and straightness — the dominant failure mode.
Cutting-edge condition on through-cutting sinus forceps, curettes, and dental elevators.
Hinge and linkage actuation through full travel with no binding.
Lumen verification on the very fine Baron and Frazier suctions, with correctly sized brushes and present stylets.
Legible sizing on specula, dental forceps numbers, curette sizes, and blade widths.
Dedicated tip-protected storage for micro-ear and micro-nasal instruments — never loose in a general tray.
Working Under the Microscope: Ear Instruments
Otologic instruments are the smallest reusable items most departments process, and their scale drives every handling rule.
The middle-ear set contains picks, hooks, curettes, elevators, and rasps with working ends measured in fractions of a millimetre, plus micro-suctions with lumens fine enough to be blocked by a single particle. Ear specula are supplied as graduated sets in several diameters, and a missing size makes the set incomplete for a given patient.
These instruments cannot be meaningfully inspected with the naked eye. Every tip is examined under magnification , comparing it against a known-good instrument of the same pattern, because a hook bent a few degrees or a curette edge slightly blunted is invisible otherwise. They must be transported and assembled in tip protectors, micro-instrument stringers, or bracketed cases that hold each instrument individually and prevent contact, and they must never be loose in a general tray.
Fine micro-suctions require lumen brushing with a correctly sized brush and verification of patency; an obstructed suction discovered mid-case in the middle ear is a serious problem.
Sizing Sets and Graduated Families
ENT and dental sets are unusually rich in graduated families , and this is a recurring source of set-integrity failures. Ear specula, nasal specula in several blade lengths, tracheostomy tubes and obturators in sized pairs, laryngoscope blades in Miller and Macintosh patterns across several sizes, Hegar-style dilators where present, and oral airways all step through sizes.
The rule is the same in every case: the count sheet names the sizes, the sizes must be complete, and they are assembled in sequence so a gap is visible. An obturator must be present and matched to its tube; a laryngoscope handle must be checked with its blade to confirm the light illuminates and the blade locks.
Dental and Oral-Maxillofacial Specifics
Oral surgery trays add extraction forceps patterned to specific teeth, elevators such as the Cryer and Potts, periosteal elevators , rongeurs , bone files , and mouth props and retractors such as the Minnesota. Maxillofacial fixation adds plating systems with the same drill, measure, and screw sequence used in orthopaedics, in miniature.
Inspection concentrates on cutting and gripping surfaces : extraction forceps beaks must meet correctly, rongeur edges must be unnicked, and bone file teeth must be sharp and free of packed debris. Instruments used intraorally are also inspected for retained cement and calculus.