Study guide
Discontinuing Treatment and Post-Access Care
CCHT Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation, Eligibility, and Exam Strategy
Official Sources and Exam Purpose Eligibility, Application Documents, and Training Verification Exam Format, Fees, Scoring, Practice Exam, and Permit Timing Blueprint and Cognitive-Level Strategy State/Federal Compliance and CMS Context 4-8 Week Post-Training Study Plan
2 Kidney Disease, Hemodialysis Principles, and Adequacy
Kidney Functions and ESRD Basics Hemodialysis Goals and Transport Principles Uremia, Fluid Overload, Electrolytes, and Acid-Base Context Dialysis Adequacy: Kt/V, URR, Treatment Time, and Adherence Pre/Post Weights, Target Weight, and Fluid Gains Patient Education for Diet, Fluid, Medications, and Treatment Adherence
3 Clinical Assessment and Pre-Treatment Safety
Pre-Treatment Assessment and Vital Signs Access Assessment and Signs of Access Failure Fluid Status and Blood Pressure Relationship Prescription Verification and Treatment Setup Checks Aseptic Technique in Patient Care Red Flags Requiring RN Escalation Before Treatment
4 Vascular Access, Cannulation, and Treatment Initiation
AV Fistula, AV Graft, and Catheter Comparison Cannulation Principles, Needle Direction, and Asepsis Initiating Hemodialysis with AV Access Catheter Precautions and Facility Protocol Boundaries Heparin Protocol Awareness and Scope Boundaries Early Treatment Monitoring After Initiation
5 Treatment Monitoring, Complications, and Discontinuation
Intra-treatment Monitoring and Vital Signs Hypotension, Cramps, Nausea, Headache, and Chest Pain Blood Loss, Infiltration, Clotting, Air, Hemolysis, and Fever Volume Status and UF Troubleshooting Discontinuing Treatment and Post-Access Care Post-Treatment Assessment, Documentation, and Escalation
6 Labs, Medications, Specimens, and Patient Education
Common Dialysis Labs Specimen Processing and Chain of Custody Medication Awareness Within Technician Role Anemia, Mineral Bone, Nutrition, and Fluid Education Teach-Back and Scope Limits Documentation of Education and Abnormal Findings
7 Technical Systems, Extracorporeal Circuit, and Machine Operation
Extracorporeal Circuit Components Dialyzer, Blood Pump, Pressures, Air Detector, and Clamps Machine Setup According to Prescription Conductivity, Temperature, pH, and Independent Checks Alarm Recognition and First Safe Actions Equipment Adverse Events and Documentation
8 Water Treatment, Dialysate, Reuse, and Equipment Safety
Water Treatment Principles and Monitoring RO, Carbon, Softener, and Microbiology Concepts Dialysate Concentrates and Powder Mixing Disinfection, Cultures, and QC Checks Reprocessed Dialyzers Where Applicable Equipment Safety: Stop, Report, and Document
9 Environment, Infection Control, and Emergency Preparedness
Standard Precautions and Hand Hygiene PPE, Bloodborne Pathogens, Isolation, and Vaccinations Surface Disinfection, Spills, Waste, and Supplies Body Mechanics and Patient Transfer Safety Emergency Exits, Fire Safety, and Environmental Hazards Disasters, Water and Power Failures, and Communication
10 Role Responsibilities, Documentation, and Professional Communication
Scope and Team Roles Privacy, Dignity, Confidentiality, and Boundaries Verbal and Nonverbal Communication Documentation of Treatment Outcomes and Adverse Events Quality Improvement and Chain of Reporting Ethical Behavior and Patient Advocacy Within Role
11 Integrated CCHT Domain Review and High-Yield Scenarios
Mixed Clinical, Technical, Environment, and Role Scenarios Application-Level Item Strategy Blueprint-Weighted Practice Blocks High-Risk Distractors and Unsafe Shortcuts Error Log by Domain and Cognitive Level Final Weak-Domain Repair
12 Exam Day, Retesting, Recertification, and Career Next Steps
Final 30/14/7 Day Plan Exam-Day Checklist, ID, Permit, and Time Use Score Report, Subarea Breakdown, and Retest Planning Recertification Every Three Years by CE and Work Experience CCHT-A Pathway and Advanced Practice Considerations Maintaining Competence and Staying Within Rules
Discontinuing Treatment and Post-Access Care
Key Takeaways Explain This Topic AI
Discontinuation (rinseback) returns the patient's blood from the circuit using normal saline, following facility procedure and the access type; verify the treatment is complete or that early termination was ordered before stopping.
For AVF/AVG needle removal: withdraw the needle along its insertion angle, then apply firm but non-occlusive pressure to the site with two-finger technique until hemostasis - enough to stop bleeding but not so much that the thrill/bruit disappears.
Confirm hemostasis before applying the dressing; do not send a patient out with active bleeding or an unsecured dressing - prolonged bleeding may indicate over-anticoagulation or an access problem and must be reported.
After hemostasis, reassess the access for a thrill (palpable buzz) and bruit (audible whoosh) per policy; loss of thrill/bruit, swelling, severe pain, or a cool/pale limb is reported promptly.
Central venous catheter discontinuation stays within facility scope and demands strict asepsis and clamp safety because catheters carry high infection and air-embolism risk; any cap break, loose connection, drainage, redness, or fever is escalated.
Last updated: June 2026
Rinseback: Returning the Blood
Discontinuation ends treatment by returning the patient's blood from the extracorporeal circuit and disconnecting from the access. The blood return step is the rinseback : normal saline (0.9% NaCl) is used to push the patient's blood from the bloodlines back into them so it is not lost.
Before stopping, verify that the prescribed treatment time and UF goal are complete, or that an early termination has been ordered or approved by the RN/prescriber. The technician does not end treatment early on their own judgment.
Follow the exact facility sequence, but the safety constants are the same:
Reduce the blood flow rate as directed before rinseback.
Keep lines and needles secure until rinseback/disconnection is complete.
Use saline (not air) to return blood - returning blood with air risks air embolism .
Watch the venous chamber and air detector throughout the return.
The exam contrasts a correct saline rinseback with the dangerous error of allowing air to chase the blood back. The whole point of the saline return is to recover the patient's blood without introducing air .
Needle Removal and Hemostasis (AVF/AVG)
For an arteriovenous fistula (AVF) or graft (AVG) , post-treatment care centers on safe needle removal and hemostasis (stopping the bleeding) without harming the access.
Step Order
Confirm rinseback is complete and the access is ready to discontinue.
Remove the needle along its original insertion angle - pull it out the way it went in, to avoid tearing the vessel wall. Do not press down on the site while the needle is still in the tissue (that drags the needle tip across the vessel).
Immediately apply pressure over the puncture using the two-finger technique - one fingertip over the skin entry and one over the deeper vessel entry (they are not the same spot).
Apply firm but non-occlusive pressure - enough to stop bleeding, but light enough that the thrill is still palpable . Occluding the access fully can clot it.
Hold for several minutes (often ~10 minutes, longer if heparinized) until hemostasis is achieved .
Confirm hemostasis before dressing , then apply the dressing without wrapping it circumferentially tight around the limb.
The Pressure Rule
Too little pressure Correct pressure Too much pressure
Continued bleeding, hematoma Bleeding stops; thrill still present Bleeding stops but thrill lost; access can clot
Prolonged bleeding after needle removal can mean over-anticoagulation (excess heparin) , an aneurysm/access problem , or a missed deeper puncture. Do not send a patient out with active bleeding or an unsecured dressing. Notify the RN if bleeding is excessive, recurrent, or hard to control.
Access Reassessment and Catheter Care
After hemostasis, reassess the access per policy. A patent AVF/AVG has:
a thrill - a palpable buzzing/vibration you feel with your fingertips over the access; and
a bruit - a continuous whooshing sound you hear with a stethoscope.
Report promptly any of these: loss of the thrill or bruit (possible clotting), swelling, severe pain, redness, drainage , a cool or pale extremity , or a pulsatile/enlarging area (possible aneurysm). A newly absent thrill is a vascular-access emergency because the access may be clotting.
Central Venous Catheter (CVC) Discontinuation
Catheters carry high infection and air-embolism risk , so technicians must stay strictly within facility scope and policy. Key safety points:
Maintain strict aseptic technique at every cap and connection - catheter hubs are a direct line to the bloodstream.
Clamp the catheter before opening any connection; never leave a lumen open to air (air-embolism risk).
Apply antimicrobial/heparin or citrate lock and new caps per policy .
Escalate immediately for a broken or missing cap, loose connection, exit-site drainage, redness, swelling, fever, or catheter damage/migration .
Post-Discontinuation Wrap-Up
Finally, confirm the site is clean, dry, and dressed , the bleeding is fully controlled , and the patient is stable before transfer. The discontinuation is not complete until the access is secured, reassessed, and the relevant findings are documented and reported.
Anticoagulation and Bleeding Time
Most patients receive heparin during dialysis to keep the circuit from clotting, which means their blood does not clot normally for a while after treatment. This directly affects how long you must hold pressure to achieve hemostasis. A heparinized patient may bleed for 10 minutes or longer after needle removal, and a patient on extra anticoagulation or with a deep puncture may take longer still.
The exam-safe rules around bleeding:
Do not rush the hold. Lifting your fingers to 'peek' too early restarts the bleeding and can dislodge the early clot.
Do not occlude the access while holding - confirm the thrill remains.
Re-bleeding after the dressing is applied is reported, not ignored; it may mean the hold was too short or the patient is over-anticoagulated.
Excessive, recurrent, or oozing bleeding is reported to the RN, who may check the heparin dose or examine the access.
A patient must never leave the unit with an actively bleeding site or an unsecured dressing - this is a frequent, high-yield exam point.
Early Termination and Sequence Errors
If a treatment must end early (for a medical event or by order), the same rinseback and hemostasis steps apply, performed safely under direction - the technician does not skip blood return or shortcut needle removal because of time pressure. Two sequence errors the exam targets: applying pressure before the needle is fully out (which shears the vessel), and beginning blood return with air rather than saline (air-embolism risk). Performing the steps in the correct order - confirm completion or order, return blood with saline, remove the needle along its angle, then apply non-occlusive pressure - is what keeps discontinuation safe.