Study guide
RO, Carbon, Softener, and Microbiology Concepts
CCHT Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation, Eligibility, and Exam Strategy
Official Sources and Exam Purpose Eligibility, Application Documents, and Training Verification Exam Format, Fees, Scoring, Practice Exam, and Permit Timing Blueprint and Cognitive-Level Strategy State/Federal Compliance and CMS Context 4-8 Week Post-Training Study Plan
2 Kidney Disease, Hemodialysis Principles, and Adequacy
Kidney Functions and ESRD Basics Hemodialysis Goals and Transport Principles Uremia, Fluid Overload, Electrolytes, and Acid-Base Context Dialysis Adequacy: Kt/V, URR, Treatment Time, and Adherence Pre/Post Weights, Target Weight, and Fluid Gains Patient Education for Diet, Fluid, Medications, and Treatment Adherence
3 Clinical Assessment and Pre-Treatment Safety
Pre-Treatment Assessment and Vital Signs Access Assessment and Signs of Access Failure Fluid Status and Blood Pressure Relationship Prescription Verification and Treatment Setup Checks Aseptic Technique in Patient Care Red Flags Requiring RN Escalation Before Treatment
4 Vascular Access, Cannulation, and Treatment Initiation
AV Fistula, AV Graft, and Catheter Comparison Cannulation Principles, Needle Direction, and Asepsis Initiating Hemodialysis with AV Access Catheter Precautions and Facility Protocol Boundaries Heparin Protocol Awareness and Scope Boundaries Early Treatment Monitoring After Initiation
5 Treatment Monitoring, Complications, and Discontinuation
Intra-treatment Monitoring and Vital Signs Hypotension, Cramps, Nausea, Headache, and Chest Pain Blood Loss, Infiltration, Clotting, Air, Hemolysis, and Fever Volume Status and UF Troubleshooting Discontinuing Treatment and Post-Access Care Post-Treatment Assessment, Documentation, and Escalation
6 Labs, Medications, Specimens, and Patient Education
Common Dialysis Labs Specimen Processing and Chain of Custody Medication Awareness Within Technician Role Anemia, Mineral Bone, Nutrition, and Fluid Education Teach-Back and Scope Limits Documentation of Education and Abnormal Findings
7 Technical Systems, Extracorporeal Circuit, and Machine Operation
Extracorporeal Circuit Components Dialyzer, Blood Pump, Pressures, Air Detector, and Clamps Machine Setup According to Prescription Conductivity, Temperature, pH, and Independent Checks Alarm Recognition and First Safe Actions Equipment Adverse Events and Documentation
8 Water Treatment, Dialysate, Reuse, and Equipment Safety
Water Treatment Principles and Monitoring RO, Carbon, Softener, and Microbiology Concepts Dialysate Concentrates and Powder Mixing Disinfection, Cultures, and QC Checks Reprocessed Dialyzers Where Applicable Equipment Safety: Stop, Report, and Document
9 Environment, Infection Control, and Emergency Preparedness
Standard Precautions and Hand Hygiene PPE, Bloodborne Pathogens, Isolation, and Vaccinations Surface Disinfection, Spills, Waste, and Supplies Body Mechanics and Patient Transfer Safety Emergency Exits, Fire Safety, and Environmental Hazards Disasters, Water and Power Failures, and Communication
10 Role Responsibilities, Documentation, and Professional Communication
Scope and Team Roles Privacy, Dignity, Confidentiality, and Boundaries Verbal and Nonverbal Communication Documentation of Treatment Outcomes and Adverse Events Quality Improvement and Chain of Reporting Ethical Behavior and Patient Advocacy Within Role
11 Integrated CCHT Domain Review and High-Yield Scenarios
Mixed Clinical, Technical, Environment, and Role Scenarios Application-Level Item Strategy Blueprint-Weighted Practice Blocks High-Risk Distractors and Unsafe Shortcuts Error Log by Domain and Cognitive Level Final Weak-Domain Repair
12 Exam Day, Retesting, Recertification, and Career Next Steps
Final 30/14/7 Day Plan Exam-Day Checklist, ID, Permit, and Time Use Score Report, Subarea Breakdown, and Retest Planning Recertification Every Three Years by CE and Work Experience CCHT-A Pathway and Advanced Practice Considerations Maintaining Competence and Staying Within Rules
RO, Carbon, Softener, and Microbiology Concepts
Key Takeaways Explain This Topic AI
The water softener ion-exchanges calcium and magnesium (hardness) for sodium, protecting the downstream RO membrane from scaling; a failed softener silently degrades RO performance.
Two carbon tanks are plumbed in series; total chlorine is tested at the sample port BETWEEN the tanks (post worker tank) so the second 'polisher' tank remains as a safety reserve before breakthrough reaches the patient.
Adequate carbon performance depends on empty-bed contact time (EBCT) - commonly a minimum of 10 minutes total across both tanks at design flow - not just on having carbon present.
Reverse osmosis forces water through a semipermeable membrane against osmotic pressure, separating purified product water from concentrated reject water; monitor percent rejection, conductivity/TDS, pressures, and flow.
Bacteria are living organisms that colonize wet systems as biofilm; endotoxin is their cell-wall fragment and can cause pyrogenic reactions even when the bacteria are dead - control needs disinfection, cultures, endotoxin testing, and correct sampling.
Last updated: June 2026
Softener and Carbon: The Pretreatment Guardians
A water softener is a tank of resin beads that performs ion exchange : it swaps the calcium and magnesium ions that make water 'hard' for sodium ions. Hardness is the enemy of the RO membrane - dissolved calcium and magnesium precipitate as scale on the membrane surface, reducing rejection and shortening membrane life. The softener regenerates by drawing brine (salt) solution through the resin, so an empty salt tank or a stuck regeneration valve quietly lets hardness through and degrades the RO downstream.
The softener does not make water safe to dialyze with by itself - it adds sodium and removes only hardness. It is a protective pretreatment step, not a purifier.
Carbon tanks are the single most safety-critical pretreatment component because they are the only barrier against chloramine . Municipalities add chlorine or chloramine (chlorine combined with ammonia) to disinfect drinking water. RO does not reliably remove chloramine, so if carbon fails, chloramine reaches the dialysate and oxidizes red blood cells, causing acute hemolysis, hemolytic anemia, and methemoglobinemia .
Facilities use two carbon tanks in series : a primary 'worker' tank and a secondary 'polisher' tank .
The sample port is between the two tanks , after the worker tank.
Testing there detects breakthrough of the first tank while the second tank still protects the patient.
If the worker tank breaks through, you have a safety reserve and time to swap the tank before contaminant reaches the loop.
Carbon performance depends on empty-bed contact time (EBCT) - the water must dwell in the carbon long enough to adsorb chloramine. AAMI guidance commonly targets a minimum of about 10 minutes total contact time across the tanks at the system's design flow. More flow means less contact time and worse removal, which is why high demand can cause breakthrough even with carbon present.
How Reverse Osmosis Works
In ordinary osmosis , water moves across a semipermeable membrane from the dilute side to the concentrated side. Reverse osmosis (RO) uses a high-pressure pump to push water the opposite way - from concentrated toward dilute - against the natural osmotic pressure. Pure product (permeate) water passes through the membrane; rejected dissolved ions, bacteria, and endotoxin are swept away in the reject (concentrate) stream to drain.
RO removes roughly 90-99% of dissolved ions and is an effective barrier to bacteria and endotoxin, but it is not a substitute for routine testing - membranes degrade, develop pinholes, and foul. Key RO monitoring includes:
Percent rejection = how much of the incoming dissolved load the membrane removes (commonly should stay above ~90%).
Conductivity / total dissolved solids (TDS) of product water - rising conductivity signals a failing membrane.
Pressures and flows across the membrane, plus reject-to-product ratio.
Alarms and the daily quality log.
Some systems add deionization (DI) after RO to polish remaining ions to high resistivity (>1 megohm-cm) ; DI beds can exhaust suddenly and dump ions, so they are monitored continuously and usually backed by an ultrafilter.
Bacteria, Endotoxin, and Biofilm
Bacteria are living organisms that thrive anywhere water sits warm and stagnant - storage tanks, hoses, dead legs, and low-flow loop sections. They attach to surfaces and secrete a protective slime layer called biofilm , which shields them from disinfectant and continuously sheds organisms and fragments back into the water.
Endotoxin (lipopolysaccharide) is a piece of the gram-negative bacterial cell wall . The crucial exam point: endotoxin causes harm even when the bacteria are dead . It is pyrogenic - it triggers fever, chills, rigors, and hypotension - and it can permeate high-flux membranes. So killing bacteria is not enough; you must also keep endotoxin low.
- Concept Bacteria Endotoxin
- What it is Live organism Dead-cell-wall fragment
- Unit CFU/mL EU/mL
- Max AAMI limit <200 <2
- Action level 50 1
- Removed by Ultrafilter, disinfection Ultrafilter (size-dependent)
Control depends on a layered program: routine loop disinfection (heat or chemical), regular cultures and endotoxin testing, correct aseptic sampling technique, a continuously circulating loop with no dead legs, and an ultrafilter as the final barrier. If a culture or endotoxin result is unacceptable, follow the facility response plan - disinfect, re-sample, and do not use the affected water or dialysate until results return to range.
How the Components Depend on Each Other
The exam loves cause-and-effect chains because each component protects the next. A failure upstream shows up as a problem downstream that looks unrelated until you trace it back.
A clogged sediment filter drops pressure and starves the carbon and RO of feed water; gauges show a large pressure differential.
A failed softener lets hardness scale the RO membrane, so weeks later RO percent rejection falls and product conductivity rises.
An exhausted carbon bed lets chlorine/chloramine pass; RO will not catch chloramine, so the patient is exposed unless the per-shift chlorine test catches it first.
A damaged RO membrane or exhausted DI bed dumps ions, raising conductivity at the stations.
A second high-yield distinction: conductivity and TDS measure dissolved chemical/ion load , while cultures and endotoxin tests measure the microbial load . A system can pass conductivity yet fail a culture, or vice versa - the two are independent dimensions of water quality, and AAMI sets separate limits for each. Never use a good conductivity reading to conclude the water is microbiologically safe, and never use a clean culture to assume the chemistry is correct.