Study guide
13.2 CIED Interrogation Workflow, Programmer Operation & Peri-Procedural Reprogramming
Registered Cardiac Electrophysiology Specialist RCES
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pre-Procedural Assessment & Patient Preparation
1.1 Procedure Room Preparation, Equipment Verification & Aseptic Readiness 1.2 Pre-Procedural Clinical Evaluation, Labs, Consents & The Universal Time-Out 1.3 Patient Identification, Transport, HIPAA & Procedural Documentation 1.4 Patient Monitoring Setup, Defibrillator Pads & Pre-Procedural CIED Interrogation 1.5 Vascular Access Planning, Skin Preparation & Sterile Draping
2 Chapter 2: Cardiac Anatomy, Conduction & Electrophysiologic Foundations
2.1 Cardiac Anatomy for the EP Lab: Chambers, Access Routes & Coronary Supply 2.2 The Cardiac Conduction System, Action Potentials & Ion Channel Physiology 2.3 Cardiac Vector Analysis, 12-Lead ECG Fundamentals & Axis Determination
3 Chapter 3: EP Lab Instrumentation, Connectology & Lab Safety
3.1 EP Recording System Architecture, Signal Amplification & Frequency Filters 3.2 Cardiac Stimulator Operation, Junction Box Routing & Noise Troubleshooting 3.3 Electrical Safety, Electrical Units, Electrocautery & Fire Safety 3.4 Radiation Safety Physics, ALARA Principles, Shielding & Dose Limits 3.5 Procedural Supplies, Catheter Inventory, Surgical Instrumentation & Wound Closure
4 Chapter 4: Intra-Procedural Imaging, Sedation & Physiologic Monitoring
4.1 Fluoroscopic Projections (RAO, LAO, AP) & X-ray Tube Optimization 4.2 Intracardiac Echocardiography (ICE) Principles, Views & Catheter Navigation 4.3 Non-Radiographic Imaging: Cardiac CT/MRI, Image Fusion & Ultrasound-Guided Access 4.4 Conscious Sedation Protocols, Airway Management & Hemodynamic Monitoring 4.5 Vital Signs, Normal Laboratory Values & Intra-Procedural Lab Monitoring
5 Chapter 5: EP Pharmacology, Anticoagulation & Emergency Drugs
5.1 Vaughan Williams Antiarrhythmic Classification & EP Electrophysiology 5.2 Diagnostic & Provocative Drugs: Adenosine, Isoproterenol, Epinephrine, Atropine 5.3 Sedation & Analgesia Pharmacology, Reversal Agents & Recovery Scoring 5.4 Heparin Protocol, ACT Monitoring & Emergency Reversal with Protamine 5.5 Oral Anticoagulants, Antiplatelets & Peri-Procedural Management 5.6 ACLS Algorithms & Emergency Medications in the EP Lab
6 Chapter 6: Catheter Navigation, Normal Electrograms & Baseline Intervals
6.1 Standard Diagnostic Catheter Positions & Fluoroscopic/Anatomical Landmarks 6.2 Intracardiac Electrogram Interpretation & Normal Baseline Intervals (PA, AH, HV) 6.3 His Bundle Electrogram Recording, Split His Potentials & Infranodal Conduction
7 Chapter 7: Programmed Electrical Stimulation & Refractory Periods
7.1 Pacing Stimulation Fundamentals, Capture Thresholds & Drive Trains 7.2 Refractory Period Determination (ERP, RRP, FRP) & Sinus Node Function Testing (SNRT, cSNRT) 7.3 AV Nodal Decremental Conduction & Dual AV Nodal Physiology
8 Chapter 8: Diagnostic Evaluation of Supraventricular & Ventricular Tachycardias
8.1 Narrow-Complex Tachycardias: Differential Diagnosis of AVNRT, AVRT & AT 8.2 Diagnostic Pacing Maneuvers: Entrainment, PPI-TCL, V-A-V vs V-A-A-V & His-Refractory PVCs 8.3 Wide-Complex Tachycardias & Ventricular Arrhythmia Mapping Criteria
9 Chapter 9: Bradyarrhythmias, AV Block & Atrial Arrhythmia Recognition
9.1 Bradyarrhythmias, AV Block Classification & Conduction System Disease 9.2 Atrial Fibrillation & Atrial Flutter: Classification, ECG Recognition & Stroke Risk
10 Chapter 10: 3D Electroanatomic Mapping & Ablation Biophysics
10.1 3D Electroanatomic Mapping Systems (Carto, EnSite, Rhythmia) Setup & Troubleshooting 10.2 Activation, Propagation & Bipolar Voltage Substrate Mapping 10.3 Ablation Biophysics: Radiofrequency, Cryoablation & Pulsed Field Ablation (PFA)
11 Chapter 11: Transseptal Access, Catheter Ablation Targets & Endpoints
11.1 Transseptal Puncture: Anatomy, Technique, Imaging Guidance & Complications 11.2 Catheter Ablation of AVNRT Slow Pathway & Accessory Pathways (WPW) 11.3 Cavotricuspid Isthmus (CTI) Ablation for Typical Atrial Flutter 11.4 Pulmonary Vein Isolation (PVI) for AFib & Ventricular Tachycardia Ablation
12 Chapter 12: Cardiac Implantable Electronic Devices: Implantation & Testing
12.1 Pacemaker & Transvenous ICD Implantation Techniques & Safety 12.2 Intra-Procedural Electrical Testing: Sensing, Pacing Thresholds, Impedance & DFT 12.3 Cardiac Resynchronization Therapy (CRT) & Conduction System Pacing (HBP, LBBAP)
13 Chapter 13: CIED Interrogation, Programming & Troubleshooting
13.1 NBG Pacemaker Codes, Pacing Modes & Timing Cycles 13.2 CIED Interrogation Workflow, Programmer Operation & Peri-Procedural Reprogramming 13.3 Interpreting & Conveying Interrogated Data: Diagnostics, Counters & Stored Episodes 13.4 Pacing & Sensing Malfunctions, Electromagnetic Interference & Temporary Pacing
14 Chapter 14: Specialized Devices, Extraction & Acute Procedural Emergencies
14.1 Subcutaneous ICD (S-ICD), Leadless Pacemakers & Left Atrial Appendage Closure 14.2 Transvenous Lead Extraction Tools, Techniques & Safety Precautions 14.3 Acute Procedural Emergencies: Perforation, Tamponade, Pericardiocentesis & Air Embolism
15 Chapter 15: Post-Procedural Care, Hemostasis & Complication Management
15.1 Femoral Hemostasis Techniques: Manual Compression, Figure-of-8 & Closure Devices 15.2 Post-Procedural Complications: Vascular Injury, AV Block, Esophageal Injury & Neurologic Deficits 15.3 Post-Procedural CIED Assessment, Device Follow-Up & Wound Care 15.4 Post-Procedure Patient Recovery, Discharge Education & Clinical Handover
13.2 CIED Interrogation Workflow, Programmer Operation & Peri-Procedural Reprogramming
Key Takeaways Explain This Topic AI
Task B6 requires interrogating cardiac implantable electronic devices as a distinct intra-procedural objective, separate from implant assistance.
Programmers are manufacturer-specific and communicate through an inductive wand or radiofrequency telemetry; there is no universal programmer.
Pacing dependence is determined by decrementing the pacing rate to observe an underlying rhythm, not by assuming the mode implies dependence.
Pacemaker-dependent patients are reprogrammed to an asynchronous mode before electrocautery or MRI, and ICD tachytherapy is suspended.
Every device reprogrammed for a procedure must be restored and re-interrogated afterward with thresholds, sensing, and impedances documented.
Last updated: September 2026
13.2 CIED Interrogation Workflow, Programmer Operation & Peri-Procedural Reprogramming
CCI lists "Interrogate Cardiac Implantable Electronic Devices (CIEDs)" as task B6 , and separately lists CIED programmer function and operation(s) , basic CIED programming , and basic CIED function in the knowledge list. In an EP lab a device is interrogated before nearly every case in a device patient, again after any external shock or cautery exposure, and always before discharge.
1. The Programmer and Telemetry
A programmer is a manufacturer-specific computer that communicates with an implanted device. There is no universal programmer : an Abbott device requires an Abbott programmer, a Medtronic device a Medtronic programmer, and so on. Identifying the manufacturer is therefore the first step in any device encounter.
- Identification method Detail
- Patient identification card Manufacturer, model, serial number, implant date, implanting physician
Chest radiograph Radiopaque alphanumeric identifier stamped in the header; distinctive generator shape and lead architecture
- Institutional or manufacturer registry Device tracking database lookup
- Manufacturer support line 24-hour technical support for every major manufacturer
Trial-and-error interrogation Attempting each available programmer — the slowest option, used only when nothing else identifies the device
Telemetry is either inductive , requiring a wand held directly over the generator , or radiofrequency (wireless) , which works over a few metres. Inductive telemetry is more robust in an electrically noisy lab; radiofrequency telemetry is convenient but can drop out. Sterile-field interrogation during a procedure uses a wand inside a sterile sleeve.
2. The Systematic Interrogation Sequence
Identify manufacturer, model, serial number, implant date, and indication.
Establish telemetry and save the pre-existing ("initial") programmed settings before changing anything.
Battery status — voltage, estimated longevity, and replacement indicators.
Lead measurements — impedance, sensed amplitude, and pacing threshold for each lead.
Programmed parameters — mode, rates, AV delays, outputs, sensitivities, refractory periods, and (for an ICD) detection zones and therapies.
Diagnostics — percentage paced per chamber, rate histograms, mode switch episodes, arrhythmia counters, heart failure diagnostics.
Stored episodes — electrograms and markers for arrhythmias and delivered therapies.
Determine pacing dependence.
Reprogram as clinically required.
Print or save the final report to the medical record , and restore original settings when the procedural need has passed.
Battery status terminology
- Indicator Meaning
- BOL — beginning of life Full battery
ERI / RRT — elective replacement indicator / recommended replacement time Schedule replacement ; typically ~3 months of normal function remain
EOL / EOS — end of life / end of service Urgent ; device may cease reliable therapy
At ERI, devices typically change behavior in a manufacturer-specific way — often reverting to a fixed VVI rate , disabling rate response, and lengthening the magnet rate — and those changes are themselves the clue on an ECG.
Normal measured values
Parameter Normal Abnormal suggests
Pacing lead impedance ~300-1,200 Ω (varies by lead) > 2,000 Ω or an abrupt rise = conductor fracture / loose set screw; < 200 Ω or an abrupt fall = insulation breach
- High-voltage (shock) coil impedance ~20-100 Ω Out of range suggests coil or connection failure
- Atrial sensed P wave > 1.5-2.0 mV Undersensing risk
- Ventricular sensed R wave > 5 mV Undersensing risk; ICD needs adequate R waves for VF detection
- Atrial threshold < 1.5 V at 0.5 ms Exit block, dislodgement, perforation
- Ventricular threshold < 1.0-1.5 V at 0.5 ms Same
Trends matter more than single values. A ventricular threshold of 1.2 V is unremarkable in isolation but alarming if it was 0.5 V three months ago. Interrogation reports plot these trends, and reading the trend is the skill being tested.
3. Determining Pacing Dependence
Pacing dependence cannot be inferred from the mode or from the percentage paced. A patient can be 100% paced and still have a stable underlying escape rhythm; another can be 40% paced and have no escape at all.
The determination is made by decrementing the programmed lower rate (or briefly programming to VVI at 30 bpm) and observing whether an intrinsic rhythm emerges, with the patient monitored, pads on, and the programmer ready to restore pacing immediately. A patient with no escape rhythm, or an escape below about 30-40 bpm that is hemodynamically inadequate , is pacemaker-dependent .
That single determination drives every subsequent peri-procedural decision.
4. Peri-Procedural Reprogramming
Situation Pacemaker ICD
Electrocautery (monopolar), pacing-dependent Asynchronous: VOO or DOO Asynchronous pacing plus suspend tachytherapy
Electrocautery, not pacing-dependent Often no change; monitor Suspend tachytherapy
External cardioversion / defibrillation Pads ≥ 8 cm from the generator, ideally anteroposterior ; interrogate afterward Same; interrogate afterward
MRI (conditional system) Enable MRI mode , asynchronous if dependent Enable MRI mode, tachytherapy off
Radiation therapy Dose limits to the generator; relocate the device if it lies in the treatment field Same, plus therapy suspension during fractions if indicated
Lithotripsy, RF ablation, TENS, electroconvulsive therapy Case-specific; asynchronous if dependent Suspend tachytherapy
Suspending tachytherapy is accomplished either by programming detection off (preferred, because it is precise and documented) or by applying a magnet over the ICD. The magnet's effect must be understood exactly, because the two device types behave differently:
Magnet over a... Effect
Pacemaker Asynchronous pacing (VOO/DOO/AOO) at a manufacturer-specific magnet rate; the magnet rate itself indicates battery status
ICD Suspends tachyarrhythmia detection and therapy only. Bradycardia pacing does not change and does not become asynchronous
A pacemaker-dependent ICD patient undergoing electrocautery therefore cannot be managed with a magnet alone: the magnet stops inappropriate shocks but leaves the bradycardia pacing susceptible to oversensing and inhibition. That patient requires programming.
The mandatory closing step: any device reprogrammed for a procedure is restored and re-interrogated before the patient leaves monitored care , with thresholds, sensing, and impedances documented and compared with the pre-procedure values. Leaving a device asynchronous, in MRI mode, or with therapies off is a well-documented and entirely preventable adverse event, and it is the reason the patient stays on continuous monitoring until restoration is confirmed.
5. Special Intra-Procedural Situations
Radiofrequency ablation in a device patient. RF current can be oversensed, and lesions near a lead can raise thresholds. Practice includes suspending tachytherapy in an ICD, programming asynchronously in a dependent patient, keeping the RF dispersive pad positioned so the current vector does not cross the generator or leads, and interrogating fully afterward.
Cryoablation near a lead can cause transient threshold rise and undersensing during the freeze, which typically recovers on rewarming but must be watched in a dependent patient.
External cardioversion in a device patient uses pads at least 8 cm from the generator, preferably in an anteroposterior orientation, at the lowest effective energy. Post-shock interrogation checks for parameter reset, threshold change, and impedance change.
Power-on reset occurs when strong interference causes the device to revert to factory backup settings — typically a fixed-rate VVI mode with nominal outputs, and with tachytherapy off in an ICD. It is recognized on interrogation as a set of parameters nobody programmed, along with a reset event marker in the diagnostics, and it requires full reprogramming to the patient's intended settings.