Study guide
7.3 IVUS & OCT
Registered Cardiovascular Invasive Specialist RCIS
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current RCIS Exam Facts 1.2 Eligibility Pathways & Documentation 1.3 Examination Matrix & Study Plan
2 Pre-Procedural Room Setup & Sterile Technique
2.1 Procedure & Control Room Setup 2.2 Sterile Technique & Universal Precautions 2.3 Personnel Preparation & Cath Lab Roles
3 Pre-Procedural Patient Preparation & Validation
3.1 Preparing the Patient for Invasive Procedures 3.2 Records, Labs, Allergies & Consent 3.3 Time-Out & Universal Protocol
4 Patient Monitoring & Vascular Access
4.1 Intraprocedural Vital Sign Monitoring 4.2 Arterial & Venous Access Sites 4.3 Ultrasound-Guided Access
5 Coronary Anatomy & Left Heart Catheterization
5.1 Coronary Anatomy & Dominance 5.2 Left Heart Catheterization & Coronary Angiography 5.3 Catheter Shapes & Angiographic Projections 5.4 Left Ventriculography & Aortography
6 Right Heart Catheterization & Hemodynamics
6.1 Right Heart Waveforms & Pressures 6.2 Cardiac Output: Fick & Thermodilution 6.3 Valve Area, Bernoulli & Shunt Calculations 6.4 Endomyocardial Biopsy Support
7 ECG & Intracardiac/Intravascular Imaging
7.1 12-Lead ECG in the Cath Lab 7.2 Intracardiac Echocardiography (ICE) 7.3 IVUS & OCT 7.4 Identifying Structures on Cardiac Ultrasound
8 Physiology Assessment & Radiation Safety
8.1 FFR & iFR Studies 8.2 Radiation Safety & ALARA 8.3 Radiographic Equipment Operation 8.4 Image Acquisition & Interpretation
9 Cath Lab Pharmacology
9.1 Anticipating Pharmacologic Needs 9.2 Recognizing Medication Effects & Adverse Reactions 9.3 Anticoagulation & ACT Targets
10 PCI Fundamentals
10.1 Balloon Angioplasty & Stent Platforms 10.2 Coronary Wiring, Lesion Prep & Flow Grades 10.3 Vascular Closure Devices
11 Chapter 11: Complex Coronary Intervention
11.1 CTO, Atherectomy & Alcohol Septal Ablation 11.2 Cardiac Thrombectomy (Mechanical & Aspiration) 11.3 Distal Protection Devices
12 Device Implants & Temporary Support
12.1 Pacemaker, ICD, CRT & Loop Recorders 12.2 Transvenous Temporary Pacemaker 12.3 Pericardiocentesis Support
13 Mechanical Circulatory Support
13.1 IABP & Impella 13.2 ECMO & LVAD Overview for the Cath Lab
14 Peripheral Vascular Interventions
14.1 Peripheral Interventions 14.2 Complex Peripheral Interventions 14.3 Peripheral Thrombectomy & Thrombolysis
15 Structural Heart Interventions
15.1 Nonvalvular Structural Therapies 15.2 Percutaneous Valve Interventions
16 Chapter 16: Emergency Clinical Presentations & Equipment
16.1 STEMI, Cardiogenic Shock & Pulmonary Edema 16.2 Stroke & Neurologic Emergencies in the Lab 16.3 Emergency Equipment Operation
17 Intraprocedural Complications
17.1 Coronary Interventional Complications 17.2 Peripheral & Structural Complications
18 Post-Procedural Activities
18.1 Arterial & Venous Hemostasis 18.2 Access-Site Complications 18.3 Patient Education, Reporting & Transfer of Care
7.3 IVUS & OCT
Key Takeaways Explain This Topic AI
IVUS uses intravascular ultrasound (typically 20–45 MHz) to measure lumen area, plaque burden, and vessel size; OCT uses near-infrared light (~1,300 nm) for 10–20× higher resolution of superficial plaque and stent struts
Minimum lumen area (MLA) on IVUS below approximately 4.0 mm² in the LAD (and similar thresholds in other vessels) supports physiologic significance in many studies, but values must be interpreted with lesion length and clinical context
IVUS excels at vessel sizing before stent selection, detecting edge dissection, confirming stent expansion and apposition, and visualizing calcium depth; OCT excels at strut coverage, thin-cap fibroatheroma identification, and precise stent malapposition
Blood must be cleared from the field for OCT (contrast or saline flush); IVUS tolerates blood better but still requires steady pull-back and coaxial catheter position
RCIS staff set up consoles, manage pull-back speed, document measurements, and recognize artifacts that mimic dissection or malapposition on both modalities
Last updated: July 2026
IVUS & OCT
Quick Answer: IVUS uses sound waves for deep vessel wall imaging and accurate lumen/vessel sizing; OCT uses light for ultra-high-resolution surface detail of plaque, stent struts, and dissection flaps. Both guide PCI optimization when angiography alone is ambiguous. RCIS staff operate consoles, manage flush protocols, and ensure quality pull-backs for interpretable images.
Angiography is a lumenogram —it shows contrast column silhouette, not plaque composition or true vessel wall dimensions. IVUS and OCT answer questions angiography cannot: How much plaque is hidden? Is the stent fully expanded? Is there edge dissection or malapposition? Is the lesion truly significant?
Fundamental Technology Comparison
- Property IVUS (Intravascular Ultrasound) OCT (Optical Coherence Tomography)
- Energy source Ultrasound (~20–45 MHz) Near-infrared light (~1,300 nm)
- Axial resolution ~100–200 µm ~10–20 µm
- Penetration depth ~4–10 mm (visualizes media/adventitia) ~1–2 mm (superficial wall detail)
- Blood interference Moderate; imaging possible in blood Must clear blood (contrast/saline flush)
- Vessel sizing Excellent (EEM and lumen borders) Excellent for lumen; less deep wall detail
- Calcium Shadowing behind calcium Can penetrate superficial calcium better
- Stent strut assessment Visible but less detail Excellent malapposition/coverage detail
- Typical catheter ~2.6–3.5 Fr compatible ~2.7 Fr rapid-exchange
Rule of thumb: Use IVUS when you need vessel size, plaque burden, and calcium depth ; use OCT when you need stent strut-level detail, thin-cap identification, or subtle dissection .
- IVUS: Image Interpretation Essentials
- Normal Layer Appearance
From lumen outward:
- Intima — thin bright line
- Media — darker sonolucent layer
- Adventitia — bright outer border
The external elastic membrane (EEM) defines the true vessel border for area measurements. The lumen border is the inner blood-intima interface.
Key Measurements
- Measurement Definition Clinical Use
- Lumen area (LA) Cross-sectional blood channel Compare minimum vs reference segments
- EEM area True vessel area including wall Plaque burden calculation
- Plaque burden (EEM − Lumen) / EEM × 100% Risk stratification; >70% at MLA site is high
- MLA (minimum lumen area) Smallest lumen cross-section Lesion significance (context-dependent thresholds)
- Reference area Normal segment proximal/distal Stent diameter and length selection
MLA thresholds (guideline-supported ranges, not absolute rules):
- LAD: MLA ≤ ~4.0 mm² often correlates with ischemia (FFR validation studies)
- LCx/RCA: Higher thresholds (~6.0 mm² LCx, ~5.5 mm² RCA) due to larger reference vessels
Always integrate MLA with symptoms, FFR/iFR, lesion length, and angiographic appearance .
Plaque Morphology on IVUS
- Appearance Likely Composition PCI Implication
- Soft/low echogenicity Lipid-rich plaque Higher embolization risk; consider distal protection
- Bright with shadowing Calcium May require rotational/orbital atherectomy before stenting
- Homogeneous moderate echo Fibrous plaque Standard technique often sufficient
- Concentric vs eccentric Remodeling pattern Eccentric plaque may hide severity on angiogram
- OCT: Image Interpretation Essentials
OCT produces cross-sectional images that look like histology slices. Because light does not penetrate blood, automated or manual flush during pull-back is mandatory.
Stent Optimization Criteria (Common Research/GUIDELINE Targets)
Parameter Acceptable Target Problem If Exceeded
Minimum stent area (MSA) >90% of reference lumen area (protocol-specific) Under-expansion → restenosis, thrombosis
Malapposed struts Distance from strut to wall; acute malapposition >200–400 µm noted Pooling, delayed endothelialization
Edge dissection Flap depth/arc; significant if >200 µm depth or >60° arc Acute closure risk; may need additional stent
Tissue prolapse Protrusion of plaque through struts Large prolapse may need further intervention
OCT is the preferred modality for stent failure analysis (in-stent restenosis, stent thrombosis) because strut coverage and neoatherosclerosis are visible.
Pull-Back Technique and RCIS Workflow
IVUS pull-back:
Advance IVUS catheter distal to the lesion (ideally in a stable branch or segment).
Confirm coaxial position —off-axis catheters distort lumen measurements.
Perform automated or manual pull-back at steady speed (typically 0.5–1.0 mm/s per system).
Record cine for offline measurement; note markers relative to side branches.
OCT pull-back:
Position catheter distal to target.
Initiate contrast or saline flush via guide catheter or power injector.
Trigger automated pull-back during blood clearance window (seconds matter).
Verify frame quality before stent deployment decisions.
- Task RCIS Responsibility
- Console setup Select vessel, calibrate, load pull-back protocol
- Flush coordination Syringe or injector timing with OCT
- Documentation Capture MLA, reference dimensions, stent MSA
- Communication Report measurement values verbally to physician
- Artifact recognition Bubble, non-coaxial, incomplete flush
- Artifacts and Pitfalls
- Artifact Modality Appearance Fix
- Non-coaxial catheter IVUS/OCT Eccentric lumen; distorted areas Reposition; use guide support
- Incomplete blood clearance OCT Streaks, signal dropout Increase flush rate; check guide engagement
- Acoustic shadowing IVUS Dark zone behind calcium Not a dissection—rotate catheter
- Bubbles Both Mobile bright spots Flush; de-air system
- Near-field saturation IVUS Ring-down near catheter Adjust depth/gain
Misreading artifact as dissection leads to unnecessary stenting; missing true edge dissection leads to acute closure. When OCT shows a flap, measure depth, length, and circumferential extent before deciding.
Clinical Scenarios on the RCIS Exam
Ambiguous angiographic lesion — IVUS MLA and plaque burden determine whether to intervene.
Left main or bifurcation — IVUS sizing selects stent diameter; OCT confirms strut apposition at bifurcation.
Stent under-expansion — Post-dilatation guided by IVUS/OCT MSA targets.
Spontaneous coronary artery dissection (SCAD) — OCT may visualize intimal flap; gentle technique required.
Chronic total occlusion (CTO) — IVUS identifies true lumen and vessel course when angiography fails.
IVUS and OCT are complementary. Mastery of measurements, pull-back technique, and artifact recognition makes you an indispensable partner in precision PCI.