Study guide
1.3 Examination Matrix & Study Plan
Registered Cardiovascular Invasive Specialist RCIS
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current RCIS Exam Facts 1.2 Eligibility Pathways & Documentation 1.3 Examination Matrix & Study Plan
2 Pre-Procedural Room Setup & Sterile Technique
2.1 Procedure & Control Room Setup 2.2 Sterile Technique & Universal Precautions 2.3 Personnel Preparation & Cath Lab Roles
3 Pre-Procedural Patient Preparation & Validation
3.1 Preparing the Patient for Invasive Procedures 3.2 Records, Labs, Allergies & Consent 3.3 Time-Out & Universal Protocol
4 Patient Monitoring & Vascular Access
4.1 Intraprocedural Vital Sign Monitoring 4.2 Arterial & Venous Access Sites 4.3 Ultrasound-Guided Access
5 Coronary Anatomy & Left Heart Catheterization
5.1 Coronary Anatomy & Dominance 5.2 Left Heart Catheterization & Coronary Angiography 5.3 Catheter Shapes & Angiographic Projections 5.4 Left Ventriculography & Aortography
6 Right Heart Catheterization & Hemodynamics
6.1 Right Heart Waveforms & Pressures 6.2 Cardiac Output: Fick & Thermodilution 6.3 Valve Area, Bernoulli & Shunt Calculations 6.4 Endomyocardial Biopsy Support
7 ECG & Intracardiac/Intravascular Imaging
7.1 12-Lead ECG in the Cath Lab 7.2 Intracardiac Echocardiography (ICE) 7.3 IVUS & OCT 7.4 Identifying Structures on Cardiac Ultrasound
8 Physiology Assessment & Radiation Safety
8.1 FFR & iFR Studies 8.2 Radiation Safety & ALARA 8.3 Radiographic Equipment Operation 8.4 Image Acquisition & Interpretation
9 Cath Lab Pharmacology
9.1 Anticipating Pharmacologic Needs 9.2 Recognizing Medication Effects & Adverse Reactions 9.3 Anticoagulation & ACT Targets
10 PCI Fundamentals
10.1 Balloon Angioplasty & Stent Platforms 10.2 Coronary Wiring, Lesion Prep & Flow Grades 10.3 Vascular Closure Devices
11 Chapter 11: Complex Coronary Intervention
11.1 CTO, Atherectomy & Alcohol Septal Ablation 11.2 Cardiac Thrombectomy (Mechanical & Aspiration) 11.3 Distal Protection Devices
12 Device Implants & Temporary Support
12.1 Pacemaker, ICD, CRT & Loop Recorders 12.2 Transvenous Temporary Pacemaker 12.3 Pericardiocentesis Support
13 Mechanical Circulatory Support
13.1 IABP & Impella 13.2 ECMO & LVAD Overview for the Cath Lab
14 Peripheral Vascular Interventions
14.1 Peripheral Interventions 14.2 Complex Peripheral Interventions 14.3 Peripheral Thrombectomy & Thrombolysis
15 Structural Heart Interventions
15.1 Nonvalvular Structural Therapies 15.2 Percutaneous Valve Interventions
16 Chapter 16: Emergency Clinical Presentations & Equipment
16.1 STEMI, Cardiogenic Shock & Pulmonary Edema 16.2 Stroke & Neurologic Emergencies in the Lab 16.3 Emergency Equipment Operation
17 Intraprocedural Complications
17.1 Coronary Interventional Complications 17.2 Peripheral & Structural Complications
18 Post-Procedural Activities
18.1 Arterial & Venous Hemostasis 18.2 Access-Site Complications 18.3 Patient Education, Reporting & Transfer of Care
1.3 Examination Matrix & Study Plan
Key Takeaways Explain This Topic AI
Current RCIS matrix weights: Pre-Procedural 8%, Diagnostic 40%, Interventional 34%, Emergency 13%, Post-Procedural 5%
Diagnostic and Interventional domains together account for 74% of scored content—prioritize hemodynamics, angiography, PCI, and structural cases
Allocate study hours proportionally to matrix weights (e.g., ~80 hours Diagnostic in a 200-hour plan)
CCI's Knowledge List spans math, waveforms, pharmacology, imaging, radiation safety, and emergency equipment across domains
- Use CCI Self-Assessment Exams and timed 170-item practice to validate readiness—not domain weights alone
- Last updated: July 2026
1.3 Examination Matrix & Study Plan
Quick Answer: CCI's current RCIS examination matrix weights are Pre-Procedural 8% , Diagnostic 40% , Interventional 34% , Emergency 13% , and Post-Procedural 5% . Build study time in proportion to those weights —roughly three of every four hours on Diagnostic + Interventional topics. Source: CCI RCIS Examination Matrix and Task List .
Passing RCIS is not about reading one textbook cover to cover. It is about task-weighted competence —the same distribution CCI uses to build the 150 scored items. This section converts the official matrix into a 200-hour sample plan (adjust up or down based on your baseline), connects each domain to high-yield tasks, and shows how to iterate with practice exams.
The Five Domains (Current CCI Weights)
Domain Approx. % of exam What CCI emphasizes
A. Conducting Pre-Procedural Activities 8% Room/equipment setup, radiation readiness, sterile technique, patient prep, records/labs/consent/time-out
B. Conducting Diagnostic Procedures 40% Monitoring, LHC/RHC, ECG, ICE/IVUS/OCT, FFR/iFR, radiation safety, angiography, access, pharmacology effects
C. Conducting Interventional Procedures 34% PCI, structural heart, peripherals, MCS (IABP/Impella/ECMO), thrombectomy, closure devices, temporary pacing
D. Responding to Emergency Procedures and Protocols 13% STEMI/shock/pulmonary edema/stroke presentations, complication management, code cart/defibrillator/airway gear
E. Conducting Post-Procedural Activities 5% Hemostasis, access-site complications, education, reporting, handoff
- Visual Weight Distribution Diagnostic ████████████████████████████████████████ 40%
- Interventional ██████████████████████████████████ 34%
- Emergency █████████████ 13%
- Pre-Procedural ████████ 8%
- Post-Procedural █████ 5%
Teaching point: Pre-procedure (8%) and post-procedure (5%) feel like "small" domains, but items often integrate knowledge from larger domains—Universal Protocol, ACT targets, and closure devices bridge pre, intra, and post. Do not skip them; just right-size time.
- Map Tasks to Study Modules
- A. Pre-Procedural (8%) — ~16 hours in a 200-hour plan
Tasks include preparing procedure/control rooms (equipment, radiation, sterile technique, QC/QA), preparing patients and personnel, and validating records (H&P, labs, consent, time-out, patient status).
Study focus:
Sterile table setup, cap/mask/gown rules, contrast warmer checks.
Universal Protocol elements and timeout documentation.
Pre-procedure labs (Cr/eGFR, INR, platelets, potassium) affecting contrast and access.
Radiation equipment QC basics tied to ALARA prep.
B. Diagnostic (40%) — ~80 hours
This is the backbone of RCIS. Tasks span monitoring vitals and waveforms, left/right heart cath, 12-lead ECG interpretation, intracardiac and intravascular imaging, FFR/iFR, radiation safety during acquisition, angiographic setup/interpretation, pharmacologic anticipation, and vascular access (femoral, radial, brachial, jugular, ultrasound-guided).
Study focus:
Waveforms: RA, RV, PA, PCWP, LV; tamponade, constriction, valve disease patterns.
Calculations: Fick and thermodilution CO, valve areas (Gorlin), shunt runs, SVR/PAWP interpretation.
Coronary anatomy and standard projections (LAO/RAO cranial/caudal uses).
Radiation: time-distance-shielding, collimation, dose metrics, staff monitoring.
Pharmacology: heparin/ACT, antiplatelets, vasopressors, reversal agents, contrast reactions.
C. Interventional (34%) — ~68 hours
Tasks include device implants (pacemaker/ICD/CRT/loop recorders), coronary and complex PCI (CTO, atherectomy), peripherals and carotid/critical limb cases, mechanical circulatory support, temporary pacing, pericardiocentesis, thrombectomy, distal protection, structural therapies (ASD/PFO/LAA), and valve interventions (valvuloplasty, TAVR, leak closure).
Study focus:
Stent/balloon selection basics, deployment troubleshooting, no-reflow and perforation recognition.
Structural: TAVR access routes, pre/post imaging checkpoints; LAA closure devices.
MCS: IABP timing, Impella/ECMO cannulation support roles.
Large-bore access and closure device families (suture, plug, compression).
D. Emergency (13%) — ~26 hours
Tasks cover emergency presentations (STEMI, cardiogenic shock, pulmonary edema, stroke) and intraprocedural complications (coronary perforation/no-reflow; peripheral/structural dissection, embolism, device migration), plus maintaining emergency equipment (defibrillator, crash cart, suction, airway tools).
Study focus:
ACLS algorithms adapted to cath lab (air embolism, contrast anaphylaxis, tamponade).
Complication kits: covered stents, coils, fat embolism protocols, stroke activation.
When to call for surgery versus continue percutaneous management.
E. Post-Procedural (5%) — ~10 hours
Tasks: arterial/venous hemostasis, access-site complication management, patient education, reporting, transfer of care.
Study focus:
Radial vs femoral hemostasis (TR band, DSTAT, manual hold, closure devices).
Recognition of retroperitoneal bleed, pseudoaneurysm, AV fistula, compartment syndrome.
Discharge instructions, hydration, contrast-induced nephropathy counseling, activity restrictions.
Proportional Study-Time Calculator
Use this formula: Domain hours = Total plan hours × Domain % .
- Total planned hours Pre (8%) Diagnostic (40%) Interventional (34%) Emergency (13%) Post (5%)
- 120 h (minimum) 10 h 48 h 41 h 16 h 6 h
- 160 h (typical) 13 h 64 h 54 h 21 h 8 h
- 200 h (strong) 16 h 80 h 68 h 26 h 10 h
Most successful candidates land 120–200 hours over 12–20 weeks while working full time—front-load Diagnostic, overlap Interventional labs with PCI chapters, and schedule timed 170-item sets in the final month.
16-Week Sample Schedule (200 Hours)
- Weeks Focus Hours Matrix alignment
- 1–2 Pre-procedure + radiation + sterile technique 16 A (+ radiation threads into B)
- 3–7 Diagnostic core: waveforms, hemodynamics, angiography, access 80 B
- 8–12 Interventional: PCI, structural, peripherals, MCS, pharmacology 68 C
- 13–14 Emergency protocols + equipment drills 26 D
- 15 Post-procedure hemostasis + complications 10 E
- 16 Full timed simulations + weak-domain review — All domains
Within each week, split time 60% reading/video , 40% questions —RCIS rewards applied recognition (waveforms, cine loops, drug scenarios) over passive highlighting.
Cross-Cutting Knowledge List
CCI publishes a Knowledge List that spans domains: mathematics (shunts, valve orifice area), medical terminology, anatomy/pathophysiology, regulatory standards, patient assessment, lab values, ECG, pharmacology, hemodynamic waveforms, imaging (angiography, IVUS, ICE, radiation equipment), sterile technique, procedural indications/contraindications/complications, hemostasis, and emergency equipment. Expect calculation and pharmacology items in Diagnostic even when the stem describes an interventional case.
Practice Validation Loop
Baseline: CCI Self-Assessment Exam (paid)—matrix-weighted performance profile by content area.
Weekly: Untimed domain quizzes from this study guide; log missed tasks , not just facts.
Monthly: Timed mixed sets (~50 items) with 2:50 pacing discipline.
Final two weeks: Two full 170-item , 2-hour-50-minute simulations; review every incorrect and "lucky guess" item.
Red flag: If Self-Assessment or practice sets show Diagnostic or Interventional areas below ~65% correct, delay scheduling—even if Pre/Post feel easy.
Study Resources (CCI-Aligned)
CCI suggests texts such as Grossman and Baim's Cardiac Catheterization , The Cardiac Catheterization Handbook (Kern), Hemodynamic Monitoring (Darovic), and Invasive Cardiology: A Manual for Cath Lab Personnel (Watson/Gorski). No single book covers the full matrix; use Diagnostic + Interventional chapters as the spine.
Execution Principles
Weight your calendar like CCI weights the exam —do not spend week three on post-procedure bandaging while waveforms remain shaky.
Integrate tasks —a question on radial hemostasis may test Post domain knowledge with Pre-procedure patient selection context.
Simulate innovation item types —practice labeling coronary segments on still frames and multi-select pharmacology questions.
Track hours by domain in a simple spreadsheet; rebalance every two weeks.
When exam day arrives, the matrix becomes muscle memory: you will have spent ~74% of prep where CCI spends ~74% of scored items —Diagnostic and Interventional cath lab practice, supported by emergency readiness and bookended pre/post procedure safety.