Study guide

10.2 Coronary Wiring, Lesion Prep & Flow Grades

Registered Cardiovascular Invasive Specialist RCIS

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current RCIS Exam Facts 1.2 Eligibility Pathways & Documentation 1.3 Examination Matrix & Study Plan

2 Pre-Procedural Room Setup & Sterile Technique

2.1 Procedure & Control Room Setup 2.2 Sterile Technique & Universal Precautions 2.3 Personnel Preparation & Cath Lab Roles

3 Pre-Procedural Patient Preparation & Validation

3.1 Preparing the Patient for Invasive Procedures 3.2 Records, Labs, Allergies & Consent 3.3 Time-Out & Universal Protocol

4 Patient Monitoring & Vascular Access

4.1 Intraprocedural Vital Sign Monitoring 4.2 Arterial & Venous Access Sites 4.3 Ultrasound-Guided Access

5 Coronary Anatomy & Left Heart Catheterization

5.1 Coronary Anatomy & Dominance 5.2 Left Heart Catheterization & Coronary Angiography 5.3 Catheter Shapes & Angiographic Projections 5.4 Left Ventriculography & Aortography

6 Right Heart Catheterization & Hemodynamics

6.1 Right Heart Waveforms & Pressures 6.2 Cardiac Output: Fick & Thermodilution 6.3 Valve Area, Bernoulli & Shunt Calculations 6.4 Endomyocardial Biopsy Support

7 ECG & Intracardiac/Intravascular Imaging

7.1 12-Lead ECG in the Cath Lab 7.2 Intracardiac Echocardiography (ICE) 7.3 IVUS & OCT 7.4 Identifying Structures on Cardiac Ultrasound

8 Physiology Assessment & Radiation Safety

8.1 FFR & iFR Studies 8.2 Radiation Safety & ALARA 8.3 Radiographic Equipment Operation 8.4 Image Acquisition & Interpretation

9 Cath Lab Pharmacology

9.1 Anticipating Pharmacologic Needs 9.2 Recognizing Medication Effects & Adverse Reactions 9.3 Anticoagulation & ACT Targets

10 PCI Fundamentals

10.1 Balloon Angioplasty & Stent Platforms 10.2 Coronary Wiring, Lesion Prep & Flow Grades 10.3 Vascular Closure Devices

11 Chapter 11: Complex Coronary Intervention

11.1 CTO, Atherectomy & Alcohol Septal Ablation 11.2 Cardiac Thrombectomy (Mechanical & Aspiration) 11.3 Distal Protection Devices

12 Device Implants & Temporary Support

12.1 Pacemaker, ICD, CRT & Loop Recorders 12.2 Transvenous Temporary Pacemaker 12.3 Pericardiocentesis Support

13 Mechanical Circulatory Support

13.1 IABP & Impella 13.2 ECMO & LVAD Overview for the Cath Lab

14 Peripheral Vascular Interventions

14.1 Peripheral Interventions 14.2 Complex Peripheral Interventions 14.3 Peripheral Thrombectomy & Thrombolysis

15 Structural Heart Interventions

15.1 Nonvalvular Structural Therapies 15.2 Percutaneous Valve Interventions

16 Chapter 16: Emergency Clinical Presentations & Equipment

16.1 STEMI, Cardiogenic Shock & Pulmonary Edema 16.2 Stroke & Neurologic Emergencies in the Lab 16.3 Emergency Equipment Operation

17 Intraprocedural Complications

17.1 Coronary Interventional Complications 17.2 Peripheral & Structural Complications

18 Post-Procedural Activities

18.1 Arterial & Venous Hemostasis 18.2 Access-Site Complications 18.3 Patient Education, Reporting & Transfer of Care

10.2 Coronary Wiring, Lesion Prep & Flow Grades

Key Takeaways Explain This Topic AI

Guide wire selection balances support, tip load, coating, and torque response for simple versus complex lesion crossing

Lesion preparation—predilation, specialty balloons, and debulking devices—improves stent delivery and expansion in calcified or fibrotic lesions

TIMI flow grades 0–3 describe antegrade perfusion of the infarct-related artery from no flow to normal filling

TIMI thrombus grades 0–5 classify angiographic thrombus burden from absent to total occlusion with large proximal thrombus

RCIS staff anticipate equipment, monitor ischemia and hemodynamics during wiring and prep, and communicate flow/thrombus grades to the team

Last updated: July 2026

10.2 Coronary Wiring, Lesion Prep & Flow Grades

Quick Answer: Successful PCI depends on crossing the lesion with an appropriate guidewire , preparing the vessel so stents deliver and expand, and grading flow and thrombus with standardized TIMI scales. RCIS specialists set up wires and prep devices, monitor for ischemia during wiring, and recognize TIMI 0–3 flow and TIMI thrombus 0–5 descriptions the team uses in STEMI and complex PCI.

Coronary Guidewires: Selection and Support

The guidewire is the rail for balloons, stents, IVUS catheters, and microcatheters. Wire choice affects crossing success , device deliverability , and safety (perforation risk with stiff tips).

Core Wire Properties

Property Clinical meaning

Tip load (grams) Stiffness at the tip; higher load penetrates fibrotic/calcified lesions but raises perforation risk

  • Tip shape Pre-shaped J or custom angulated tips steer into branches
  • Coating Hydrophilic coatings reduce friction in tortuous vessels
  • Body support Stiffer shaft supports delivery of stent systems in calcified or angulated anatomy
  • Torque response Predictable 1:1 rotation helps steer through lesions

Workhorse wires (moderate tip load, versatile coating) handle most routine PCI. Extra-support wires improve stent delivery when the lesion is calcified or the vessel is tortuous. Dedicated CTO or chronic-total-occlusion wires (very high tip load, tapered tips, polymer jackets) belong in advanced sets—RCIS ensures sterile wire exchange and pinch-wipe technique to avoid losing wire position.

Wiring Technique Essentials

Advance wire tip under fluoroscopy with gentle torque; never force a prolapsed loop.

Confirm wire in true lumen —not subintimal—before predilation or stenting; contrast injection or dual-wire techniques may be used by the operator.

Maintain wire position during equipment exchanges; use wire holders , extension wires , and torque devices as requested.

Avoid deep seating of guide catheter that traps wire and restricts movement.

Monitor ST segments and chest pain during prolonged wiring attempts—ischemia may require pause or nitroglycerin per protocol.

RCIS anticipates second wire for bifurcation, microcatheter for support, and wire retrieval devices if fractured.

Lesion Preparation

Lesion prep modifies plaque so balloons and stents can cross, expand, and appose the wall. Under-prepared calcified lesions cause stent under-expansion —a major predictor of stent thrombosis and restenosis.

Predilation with Balloons

Semi-compliant balloons sized to reference vessel diameter crack plaque and verify crossing before stent. High-pressure predilation in resistant lesions may require non-compliant balloons after initial SC inflation.

Specialty Balloons

Cutting balloons — micro-blades score plaque; useful in ostial and resistant fibrotic lesions.

Scoring balloons — non-blade scoring elements (e.g., wrap wires) modify plaque without blade depth.

Use per physician preference and IFU; RCIS confirms artery size match and rated pressure .

Debulking and Atherectomy

When balloon alone fails:

Device class Mechanism RCIS notes

Rotational atherectomy Rotating burr abrades calcified plaque Requires saline drip, tachycardia monitoring, slow burr advancement

  • Orbital atherectomy Eccentric crown orbits vessel Similar setup; crown size selection matters
  • Laser atherectomy Pulsed laser photoablation Eye protection, contrast flush discipline

Debulking increases embolization and slow-flow risk—have thrombus aspiration , GP IIb/IIIa , and temporary pacing readiness in RCA lesions when ordered.

Thrombus Management Before Stenting

In STEMI or thrombotic lesions, manual aspiration thrombectomy , rheolytic systems (where still used), or stent retrievers may reduce thrombus burden before stenting. Communicate TIMI thrombus grade before and after aspiration (see below).

TIMI Flow Grades (0–3)

The Thrombolysis In Myocardial Infarction (TIMI) flow grade describes antegrade coronary perfusion distal to the lesion—most critical for the infarct-related artery (IRA) in acute MI, but used in elective PCI when flow is compromised.

Grade Definition Angiographic picture

TIMI 0 No antegrade flow beyond the obstruction Contrast does not perfuse distal to the culprit; total occlusion

  • TIMI 1 Penetration without perfusion Contrast passes beyond stenosis but does not fill the distal bed
  • TIMI 2 Partial perfusion Distal vessel fills but clearance is slower than normal comparators
  • TIMI 3 Complete perfusion Normal filling and clearance of contrast compared with other vessels

Primary PCI goal in STEMI is restoration of TIMI 3 flow in the IRA. TIMI 2 may still leave jeopardized myocardium; operators often pursue additional aspiration, balloon, or stent optimization.

RCIS role: call out flow changes during cine review, ensure ECG and hemodynamic monitoring when flow is restored (reperfusion arrhythmias), and document final TIMI flow in the procedural record.

TIMI Frame Count (Context)

Some items reference corrected TIMI frame count (CTFC) —a quantitative measure of contrast transit. Lower counts imply faster flow. RCIS may be asked to note frame counts on research cases; know it supplements grade 2 versus 3 distinction.

TIMI Thrombus Grades (0–5)

TIMI thrombus grade quantifies angiographic thrombus burden in the IRA—important in STEMI when deciding aspiration strategy and predicting no-reflow .

  • Grade Description
  • 0 No angiographic thrombus
  • 1 Possible thrombus (haziness) without clear filling defect
  • 2 Definite thrombus with greatest dimension < ½ vessel diameter
  • 3 Definite thrombus ≥ ½ but < 2 vessel diameters
  • 4 Definite thrombus ≥ 2 vessel diameters
  • 5 Total occlusion with large proximal thrombus (typically TIMI 0 flow)

Higher thrombus grades correlate with slower flow restoration and distal embolization risk. After aspiration or stenting, re-grade thrombus and flow for documentation.

Integrating Wiring, Prep, and Grades in Case Flow

A structured mental model for RCIS:

Assess angiogram — estimate thrombus grade and baseline TIMI flow.

Stage wires and prep devices per lesion complexity (calcium on fluoroscopy → atherectomy tray).

Cross lesion — monitor ischemia; communicate if wire appears subintimal.

Prep lesion — predilation or debulk; watch for slow flow or dissection.

Re-assess flow and thrombus — target TIMI 3 with minimal thrombus before final stent optimization.

Deploy stent (Section 10.1) and confirm TIMI 3 with no reflow.

During slow flow/no-reflow , support includes intracoronary nitroglycerin, adenosine, verapamil, nicardipine per lab protocol, inotrope/vasopressor readiness, and temporary pacing for bradyarrhythmias.

Safety and Radiation During Wiring

Prolonged wiring increases fluoroscopy time —enforce ALARA , collimation, and dose awareness . RCIS may operate capture pedals , manage contrast syringes , and limit staff exposure via shield positioning .

Documentation

Record wire type , prep devices used (balloon sizes/atm, burr size/rpm if applicable), initial and final TIMI flow , and thrombus grade when STEMI. These fields appear in CathPCI and hospital quality metrics.

Study Tips for RCIS Items

Distinguish TIMI flow (perfusion) from TIMI thrombus (clot burden)—they answer different questions.

TIMI 1 is not "almost TIMI 3"—it is penetration without distal bed perfusion.

Lesion prep is not optional in heavy calcification —exam scenarios often hide under-expanded stents after skipped prep.

Wiring and prep are where PCI succeeds or fails before a stent is ever opened. Mastering wire support concepts, prep tools, and TIMI scales lets you anticipate the next device and speak the same language as the interventional cardiologist under time pressure.