Study guide
11.2 Pulmonic-Valve Anatomy, Structure, and Function
CCI Registered Cardiac Sonographer RCS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: RCS Orientation and Clinical Context
1.1 RCS Identity, Exam Format, Application, and Retesting 1.2 Clinical History, Symptoms, Indications, and Risk Factors 1.3 Prior Studies, Serial Change, and Cross-Modality Context
2 Chapter 2: Orders, Safety, and Patient Preparation
2.1 Order Verification, Scope, and Protocol Selection 2.2 Sonographer Ergonomics and Staff Safety 2.3 Patient Preparation, Positioning, Consent, Infection Control, and Aftercare
3 Chapter 3: Reporting and 2-D TTE Foundations
3.1 Structured Findings, Significant Results, and Escalation 3.2 Standard 2-D TTE Windows, Views, and Acquisition Sequence 3.3 2-D Measurements, Foreshortening, Image Quality, and QA
4 Chapter 4: M-Mode and Doppler Acquisition
4.1 M-Mode Alignment, Timing, Measurements, and Pitfalls 4.2 Color Doppler Acquisition, Scale, Gain, and Jet Display 4.3 PW and CW Spectral Doppler Acquisition
5 Chapter 5: Advanced Doppler and Contrast
5.1 Tissue Doppler and Hemodynamic Sample Placement 5.2 Ultrasound-Enhancing Agents and LV Opacification 5.3 Agitated-Saline Studies and Intracardiac Shunts
6 Chapter 6: Stress Echocardiography
6.1 Exercise Stress Echo Protocols and Peak Imaging 6.2 Pharmacologic Stress Echo, Dobutamine, and Safety 6.3 Non-Ischemic Stress Echo and Hemodynamic Provocation
7 Chapter 7: TEE, Strain, and 3-D TEE
7.1 Assisting TEE: Preparation, Probe Safety, Views, and Complications 7.2 Strain Acquisition, Tracking Quality, and Reproducibility 7.3 3-D TEE Acquisition, Cropping, Orientation, and Artifacts
8 Chapter 8: 3-D TTE and the Aortic Valve
8.1 3-D TTE Full-Volume Acquisition and Quantitation 8.2 Aortic-Valve Anatomy, Morphology, and Function 8.3 Aortic Stenosis: Velocities, Gradients, Valve Area, and Flow States
9 Chapter 9: Aortic Regurgitation and Mitral Structure
9.1 Aortic Regurgitation Mechanisms and Integrated Severity 9.2 Mitral-Valve Anatomy, Motion, and Mechanisms 9.3 Mitral Stenosis: Planimetry, Gradients, Pressure Half-Time, and Suitability
10 Chapter 10: Mitral and Tricuspid Valve Findings
10.1 Mitral Regurgitation Mechanism, Quantitation, and Severity Integration 10.2 Tricuspid-Valve Anatomy, Structure, and Function 10.3 Tricuspid Stenosis Assessment
11 Chapter 11: Right-Sided Valve Disease
11.1 Tricuspid Regurgitation Mechanism and Severity 11.2 Pulmonic-Valve Anatomy, Structure, and Function 11.3 Pulmonic Stenosis Assessment
12 Chapter 12: Pulmonic Regurgitation and Prosthetic Valves
12.1 Pulmonic Regurgitation Mechanism and Severity 12.2 Normal Mechanical and Bioprosthetic Valve Assessment 12.3 Prosthetic Obstruction, Regurgitation, Thrombosis, and Patient–Prosthesis Mismatch
13 Chapter 13: Endocarditis and Cardiac Chambers
13.1 Valvular Endocarditis, Vegetations, Abscess, and Complications 13.2 LV and LA Size, Geometry, Volumes, Mass, and Function 13.3 RV and RA Size, Pressure, Volume, and Function
14 Chapter 14: Cardiomyopathy Phenotypes and Diastology
14.1 Dilated and Hypertrophic Cardiomyopathies, SAM, and LVOT Obstruction 14.2 Restrictive, Arrhythmogenic, and Stress Cardiomyopathies 14.3 Diastolic Function, Filling Pressure, Grading, and Pitfalls
15 Chapter 15: Systolic Function and Ischemia
15.1 LV Systolic Function, Simpson EF, Regional Motion, and Output 15.2 RV Systolic Function: TAPSE, S-prime, FAC, and Coupling 15.3 Ischemic Heart Disease, Coronary Territories, Stress Response, and Complications
16 Chapter 16: Pericardium and Great Vessels
16.1 Pericardial Effusion, Tamponade, Constriction, and Doppler Physiology 16.2 Great Vessels, Venous Return, and Pulmonary Artery Assessment 16.3 Aortic Root, Aneurysm, Dissection, and Coarctation
17 Chapter 17: Pulmonary Pressure, Masses, and Congenital Recognition
17.1 Pulmonary Hypertension, RAP/PASP Estimation, and RV Consequences 17.2 Cardiac Masses, Thrombus, Tumor, Vegetation, and Mimics 17.3 Adult Recognition of ASD, VSD, PFO, PDA, and Congenital Clues
18 Chapter 18: Devices, Strain, and Hemodynamics
18.1 ICDs, Pacemakers, Occluders, Closure Devices, and Mechanical Support 18.2 Strain Interpretation, Global Longitudinal Strain, and Disease Patterns 18.3 Cardiac Hemodynamics, Bernoulli, Continuity, Stroke Volume, and Shunts
19 Chapter 19: Infiltrative Disease and Physics Foundations
19.1 Amyloid, Sarcoid, and Other Infiltrative Disease Patterns 19.2 Ultrasound Wave Properties, Propagation, Frequency, and Wavelength 19.3 Artifact Recognition: Reverberation, Shadowing, Mirror, Refraction, and Aliasing
20 Chapter 20: Resolution and Doppler Optimization
20.1 Axial/Lateral Resolution, Frame Rate, Depth, Focus, and Trade-Offs 20.2 Spectral Doppler Optimization, Nyquist, Filters, Gain, and Angle 20.3 Color Doppler Optimization, Scale, Priority, Variance, and Gain
21 Chapter 21: 2-D, 3-D, and Contrast Optimization
21.1 2-D Optimization: Frequency, Gain, TGC, Harmonics, Depth, and Focus 21.2 3-D Optimization: Volume Rate, Stitching, Cropping, and Display 21.3 Contrast Optimization: Mechanical Index, Destruction, Replenishment, and Artifacts
11.2 Pulmonic-Valve Anatomy, Structure, and Function
Key Takeaways Explain This Topic AI
The pulmonic valve usually has anterior, right, and left cusps at the junction of the distal RVOT and MPA, but its anterior position limits single-view visualization.
Parasternal, PA-focused, subcostal, modified apical, and high windows provide complementary cusp, RVOT, MPA, branch, and Doppler information.
Sequential PW sampling localizes subvalvular, valvular, supravalvular, or branch acceleration; CW obtains maximum velocity but cannot localize depth.
Structure, respiration and flow state, PR, RV remodeling, and congenital or postoperative anatomy complete pulmonic-valve functional assessment.
Last updated: July 2026
Place the pulmonic valve in the outflow tract
The pulmonic valve is the most superior cardiac valve and lies anterior and slightly left of the aortic valve. It forms the junction between the distal muscular RV outflow tract, or RVOT, and the main pulmonary artery, or MPA. The normal valve usually has thin anterior, right, and left semilunar cusps without chordae or papillary muscles. The left cusp is nearest the aortic root and basal LV septum; the anterior and right cusps overlie the anterolateral RV free wall. Bicuspid, quadricuspid, dysplastic, or absent valves occur, but limited visualization of three cusps does not by itself establish an abnormal cusp number.
The annulus, cusps, sinuses, MPA, and proximal right and left pulmonary arteries form a functional unit. In systole, the cusps open into the sinuses and permit low-resistance ejection; in diastole, they coapt centrally. Thin normal cusps may be difficult to see throughout motion. Trivial or mild physiologic pulmonic regurgitation is common, so detection of a small diastolic color signal does not establish structural disease. Evaluate leaflet tissue, opening, coaptation, flow, and right-heart response together.
Use several windows because the valve is anterior
Window How to obtain it Main information
Parasternal short axis at aortic level Angle superiorly toward the left shoulder RVOT, annulus, cusps, MPA, proximal branches; primary color and CW alignment
PA-focused parasternal view Rotate and tilt from short axis to lengthen MPA and bifurcation Main and branch PA caliber, supravalvular or branch acceleration
Subcostal RVOT Rotate from subcostal short axis and direct anteriorly Alternative cusp and RVOT anatomy, useful when parasternal windows are poor
Modified apical/RV inflow-outflow Tilt anteriorly to include RVOT and valve Additional Doppler alignment and relationship to RV inlet
High parasternal or suprasternal Direct toward MPA and branch arteries when obtainable Distal MPA or branch stenosis that is outside the standard valve view
Begin with a narrow, shallow 2-D sector; optimize focus and frequency for the near-field RVOT. Sweep rather than freezing on the first apparent cusp. Color-map from proximal RVOT through the valve, MPA, and visible branches. A low Nyquist setting helps localize subtle acceleration but exaggerates the displayed jet, so reset the scale for documentation. Place PW gates sequentially from RVOT to annulus, distal MPA, and branches. PW identifies where velocity first rises; CW then captures the highest velocity but cannot determine its depth. Biplane and 3-D imaging can show en-face cusp anatomy when image quality permits. TEE, CT, or CMR may be needed when transthoracic windows cannot answer the anatomic question.
Separate the levels of obstruction
Level Morphologic or Doppler clue Common setting
Subvalvular RVOT Acceleration begins below a normally opening valve; muscular narrowing may be dynamic Double-chambered RV, hypertrophic muscle bundles, postoperative anatomy
Valvular Thickened, doming, fused, or dysplastic cusps; color narrows at annulus Congenital valvular PS, rare rheumatic or carcinoid restriction
Supravalvular MPA Valve opens normally; aliasing and PW step-up begin above annulus Congenital narrowing, postsurgical or catheter-related change
Branch pulmonary artery MPA may be normal; focal branch acceleration or asymmetric PA size Congenital branch stenosis, prior repair or intervention
High-flow mimic No discrete narrowing; broadly increased velocity Anemia, fever, pregnancy, left-to-right shunt, substantial pulmonic flow
The pulmonary arteries are not fully seen in every adult study. Do not call valvular stenosis merely because CW velocity is high: a continuous-wave beam records every velocity along its path and may include subvalvular, supravalvular, or branch obstruction. Conversely, an apparently normal cusp frame cannot exclude disease when the valve is poorly resolved. State which levels were visualized and which remain uncertain.
Recognize structural patterns and consequences
Congenital valvular PS most often shows systolic doming from commissural fusion with a narrow central opening and poststenotic MPA dilation. A dysplastic valve may be thick, nodular, and poorly mobile without classic doming; the annulus may be small. Rheumatic involvement is uncommon and usually accompanies other valve disease. Carcinoid may thicken and retract right-sided leaflets, causing mixed stenosis and regurgitation. Endocarditis can produce vegetation or destruction, while prior balloon valvuloplasty can leave residual stenosis and increased regurgitation. Repaired congenital disease may include a patch, conduit, prosthesis, or altered branch anatomy; identify what structure is actually being interrogated.
Pressure obstruction produces RV hypertrophy before dilation; advanced disease may lead to RV systolic or diastolic dysfunction, RA enlargement, secondary TR, and systemic venous congestion. Volume overload from significant PR instead favors RV dilation and will be graded in the next chapter. Measure RV wall thickness, size, and function from recommended right-heart views, inspect septal shape, assess RA and IVC, and record TR for RV pressure estimation. A poststenotic MPA may enlarge despite a normal distal PA pressure.
Pulmonary flow varies with respiration and preload. Record several cycles during quiet breathing, note mechanical ventilation, and choose representative, well-aligned beats. In AF or ectopy, average protocol-defined beats and avoid postectopic augmentation. Compare morphology and consequences, not only peak velocity, across serial examinations. A change in oxygenation, cardiac output, pregnancy, anemia, or shunt flow can change Doppler without a change in cusp opening.
Complete a structure-function audit
Before leaving the window, confirm cusp morphology and mobility, annular and MPA dimensions when indicated, the first site of color aliasing and PW acceleration, the best CW envelope, PR presence, RV pressure and remodeling, and associated congenital or postoperative findings. If the anatomy and Doppler disagree, reacquire from another window. Report limited cusp visualization explicitly and recommend advanced imaging through the interpreting clinician when localization affects management. A defensible pulmonic-valve study explains what opens, where flow accelerates, and how the right heart has responded.
PW localizes; CW maximizes
Step a PW sample from the RVOT through the valve into the MPA and branches to find where velocity increases. Use CW afterward for the highest velocity, remembering that CW alone cannot identify the obstruction level.