Study guide

8.4 Construction Insurance & Bonds

Certified Construction Manager Exam

Track your progress as you read

Finished sections get a check mark.

1 Program & Project Management Fundamentals

1.1 Project Management Fundamentals 1.2 Project Initiation & Chartering 1.3 Scope Management & WBS 1.4 Resource Allocation & Management 1.5 Project Relationships & Stakeholders

2 Chapter 2: Project Planning & Pre-Construction

2.1 Pre-Construction Phase Services 2.2 Project Delivery Methods 2.3 Bidding, Procurement & Award 2.4 Project Communications Management 2.5 Site Management & Logistics

3 Cost Management & Value Engineering

3.1 Cost Management Principles 3.2 Cost Estimating Techniques 3.3 Value Engineering Processes 3.4 Earned Value Management (EVM) 3.5 Progress Payments & Cost Control

4 Chapter 4: Time Management & CPM Scheduling

4.1 Time Management & Scheduling Fundamentals 4.2 Scheduling Techniques (CPM, GERT, Line of Balance, PERT) 4.3 CPM Network Calculations and Logic 4.4 Schedule Compression (Crashing, Fast-tracking, Leveling) 4.5 Time Extensions, Delay Analysis & Schedule Control

5 Chapter 5: Contract Administration & Project Documentation

5.1 Contract Management & Administration Principles 5.2 Contract Types & Payment Provisions 5.3 Submittals, Shop Drawings & RFIs 5.4 Change Orders & Change Directives 5.5 Project Closeout Procedures

6 Chapter 6: Quality Management & Commissioning

6.1 Quality Management Principles 6.2 Quality Management Systems 6.3 Quality Assurance (QA) and Quality Control (QC) 6.4 Quality Inspection & Testing 6.5 Building Commissioning

7 Chapter 7: Safety Management & Incident Prevention

7.1 Safety Management Principles 7.2 OSHA Compliance & Construction Standards 7.3 Hazard Identification & Mitigation 7.4 Safety Training & Communication 7.5 Accident Investigation & Safety Performance

8 Chapter 8: Risk Management, Insurance & Bonds

8.1 Risk Management Principles 8.2 Risk Identification & Assessment 8.3 Risk Response & Mitigation Planning 8.4 Construction Insurance & Bonds 8.5 Contingency Planning & Management

9 Chapter 9: Professional Practice & CMAA Standards

9.1 Professional Practice & Construction Law 9.2 Roles & Responsibilities of the CM 9.3 Ethics & Professional Conduct 9.4 CMAA Standards of Practice 9.5 Construction Claims & Disputes

10 Chapter 10: Sustainability & Environmental Compliance

10.1 Sustainability & Green Construction 10.2 Sustainable Practices & LEED 10.3 Environmental Compliance & Risk

11 Chapter 11: Construction Technology & BIM

11.1 Construction Technology & BIM 11.2 Project Management Software 11.3 Site Technology & Tools

8.4 Construction Insurance & Bonds

Key Takeaways Explain This Topic AI

Insurance is a risk transfer mechanism that pools risk and pays out upon a covered loss, whereas a surety bond is a three-party guarantee of performance or payment.

Builder's Risk insurance covers physical damage to the project under construction, typically on an 'all-risk' basis excluding specific perils.

Commercial General Liability (CGL) protects against third-party claims for bodily injury and property damage arising from construction operations.

Performance bonds guarantee that the contractor will complete the work according to the contract, while Payment bonds guarantee that subcontractors and suppliers will be paid.

Last updated: July 2026

In the construction industry, it is impossible to avoid or mitigate all risks. Therefore, risk transfer is a heavily utilized strategy. The two primary vehicles for transferring financial risk are insurance policies and surety bonds. While they both provide financial protection, they operate on fundamentally different principles. The Construction Manager must understand these instruments to ensure the project is adequately protected and contractual requirements are met.

Construction Insurance

Insurance is a two-party contract between the insured (e.g., the owner or contractor) and the insurer. The insured pays a premium, and the insurer agrees to compensate the insured for covered losses. Insurance operates on the principle of pooling risk; the insurer expects losses to occur and pays them from the pool of collected premiums.

Key insurance policies on a construction project include:

1. Builder's Risk Insurance (Course of Construction): This is property insurance that covers physical damage to the building or structure while it is under construction. It covers the materials, fixtures, and equipment that are intended to become a permanent part of the project. Builder's Risk is typically written on an "all-risk" basis, meaning it covers all perils except those specifically excluded (common exclusions include earthquakes, floods, and acts of terrorism, which may require separate endorsements). Either the owner or the general contractor can purchase this policy, depending on the contract terms.

2. Commercial General Liability (CGL): CGL insurance protects the insured (usually the contractor) against liability claims for bodily injury and property damage arising out of premises, operations, products, and completed operations. Importantly, CGL covers damage to third parties , not damage to the project itself (which is covered by Builder's Risk) or injuries to the contractor's own employees.

3. Workers' Compensation: This is a statutorily required insurance that provides wage replacement and medical benefits to employees injured in the course of employment, in exchange for mandatory relinquishment of the employee's right to sue their employer for negligence. It is an absolute requirement for any contractor operating on the site.

4. Professional Liability (Errors & Omissions / E&O): This insurance protects professionals (architects, engineers, and sometimes CMs) against claims alleging negligence, errors, or omissions in the performance of their professional services. CGL policies specifically exclude professional design errors, making E&O insurance critical for design professionals.

5. Subcontractor Default Insurance (SDI): Often referred to by the trade name Subguard, SDI is purchased by the general contractor to protect against the financial impacts of a subcontractor defaulting on their obligations. It is often used as an alternative to requiring subcontractors to provide performance and payment bonds.

Surety Bonds

A surety bond is fundamentally different from insurance. It is a three-party agreement among:

The Principal: The party performing the obligation (typically the General Contractor).

The Obligee: The party receiving the benefit of the guarantee (typically the Owner).

The Surety: The financial institution (usually an insurance company) that guarantees the Principal's performance.

Unlike insurance, where losses are expected, surety is a form of credit. The surety strictly underwrites the contractor's financial capacity, experience, and character, expecting zero losses. If the surety pays a claim to the obligee, it has the legal right of subrogation to seek full reimbursement from the principal.

The three standard types of construction bonds are:

1. Bid Bond: Submitted with a contractor's bid, this bond guarantees that if the contractor is awarded the project, they will enter into the contract at the bid price and provide the required performance and payment bonds. If the contractor backs out, the surety pays the owner the difference between the defaulting contractor's bid and the next lowest responsible bid (usually capped at the penal sum of the bond, typically 5-10% of the bid).

2. Performance Bond: This bond guarantees to the owner (obligee) that the contractor (principal) will perform all work in accordance with the contract documents. If the contractor defaults, the surety must step in to ensure the project is completed. The surety may choose to finance the existing contractor, hire a replacement contractor, or pay the penal sum of the bond to the owner.

3. Payment Bond: This bond guarantees that the contractor will pay all subcontractors, laborers, and material suppliers associated with the project. This protects the owner from mechanic's liens being filed against the property by unpaid lower-tier parties. Performance and payment bonds are almost always issued together and are statutorily required on most public works projects (under the federal Miller Act and state "Little Miller" Acts).