Study guide

Lab 4: DHCP, DNS, and Default Gateway Symptoms

CCST Networking Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation, Official Sources, and Exam Strategy

Official Exam Profile and Source Hierarchy Registration, Delivery, Attempts, and Results Using the Six Official Topic Areas Building a Practical Study Plan Exam Strategy Without Unsupported Shortcuts Ethical Preparation and Path Forward

2 Network Standards, Models, and Common Protocols

Network Building Blocks OSI and TCP/IP Models Frames, Packets, Segments, and Data Flow Network Types and Scope Cloud, On-Premises, Protocols, and Ports Bandwidth, Throughput, Latency, and Jitter

3 Chapter 3: IPv4, IPv6 Addressing, and Subnet Formats

3.1 Public, Private, and Local Addressing 3.2 IPv4 Dotted Decimal and Binary Basics 3.3 Subnet Masks, CIDR, and Prefix Lengths 3.4 Subnet Logic, Host Ranges, and Gateways 3.5 IPv6 Address and Prefix Formats 3.6 MAC vs IP in Addressing Troubleshooting

4 Endpoints, Media, Cabling, and Client Connectivity

Endpoint Devices and Network Roles Network Interface Cards and Link Status Copper, Fiber, Coax, and Connector Basics Wired, Wi-Fi, and Cellular Access Methods Interference, Signal Quality, and Physical Reliability Client Connectivity Checks by Operating System

5 Infrastructure Devices, Ports, and Physical Installation

Infrastructure Device Roles Ports, Connectors, and Device Identification Cisco Device LEDs and Status Checks Network Diagrams and Cabling Instructions Power over Ethernet and Powered Devices Racks, Patch Panels, and Installation Basics

6 Switching, Routing, and Network Services

Basic Switching and MAC Learning VLANs and Local Boundaries Routing, Default Gateway, and ARP DNS, DHCP, and NAT Services Transport-Layer Services Small Network Traffic Flow

7 Troubleshooting Methodology, Ticketing, and Documentation

Help Desk Intake and Information Gathering Scope, Impact, and Prioritization Reproduce, Isolate, and Escalate Ticket Quality and Operational Documentation User Communication and Change History Physical, Data Link, and Network Layer Triage

8 Diagnostic Commands, Packet Capture, and Device Data

Command-Line Triage and Ping Path and Client Configuration Commands DNS and Socket Diagnostics Wireshark Capture and Save Device Access and Data Collection Basic Cisco Show Commands

9 Security, Firewalls, Wireless, and Safe Defaults

Firewall Filtering and Traffic Policy Least Privilege, AAA, Passwords, and MFA Wireless Security, WPA2, WPA3, and WPAx Guest Networks, Segmentation, and Shared Devices Common Threats and Safe User Practices Secure Home Router Baseline

10 Integrated Small Network Build and Repair Labs

Lab 1: Build a Basic Office LAN Lab 2: Repair No Internet After an Office Move Lab 3: Wireless Clients Cannot Reach Local Resources Lab 4: DHCP, DNS, and Default Gateway Symptoms Lab 5: Switch, Router, and Service Boundaries Lab 6: Escalation, Documentation, and Handoff

11 CCST to CCNA Career Path and Operational Readiness

Entry-Level Networking Roles and Expectations CCST vs CCNA and the Cisco Roadmap NetAcad 70-Hour Path and Study Plan Lab Habits for Real Operational Readiness Ethical Preparation, Portfolio, and Logbook Exam Scheduling Calendar and Readiness Check

12 Final Review, Exam Day, and Remediation Plan

Final Review Map to Official Objectives 50-Minute Exam Day Timing Unsupported Facts and Ethical Preparation Retake Planning Before the First Attempt Post-Fail Remediation Workflow Post-Pass Next Steps and Validity

Lab 4: DHCP, DNS, and Default Gateway Symptoms

Key Takeaways Explain This Topic AI

DHCP failures show as missing, APIPA (169.254.x.x), wrong-subnet, duplicate, or incomplete address settings.

DNS failures show when IP connectivity works (ping by address succeeds) but names fail to resolve.

A wrong default gateway breaks off-subnet/Internet access while same-subnet local access can still work via ARP.

Choose the next test by the symptom pattern, not a memorized command order; isolate with minimum disruption.

Last updated: June 2026

Scenario: Three Users, Three Different Failures

The approved plan: employee clients use 172.16.8.0/24 , gateway 172.16.8.1 , DHCP range 172.16.8.100 - 172.16.8.220 , DNS server 172.16.8.10 , printer 172.16.8.25 . Three users all say 'the network is down.' Your job is to read each client's settings and pick the next step.

Symptom-to-Cause Map

  • Observed Likely failed service Diagnostic that confirms it
  • 169.254.x.x, no gateway/DNS DHCP not reached ipconfig /release + /renew , check VLAN/relay
  • Correct IP+gw, pings 8.8.8.8, names fail DNS nslookup name , compare DNS server
  • Correct IP+DNS, gateway off-subnet Wrong default gateway Ping gateway, check DHCP option/manual entry
  • Duplicate IP warning Address conflict / rogue DHCP Check for second DHCP server
  • User A - DHCP Failure

User A: 169.254.44.12 , no gateway, no DNS, link up. This is APIPA : no usable DHCP lease. DHCP uses a four-step exchange - Discover, Offer, Request, Acknowledge (DORA) - of broadcast and unicast packets; if any step fails, the client falls back to a self-assigned 169.254 address. Next steps are local: verify cable and switch port, confirm the right wired network/SSID, release and renew the lease ( ipconfig /release then /renew ), compare to another device on the same port, and check whether others on the same VLAN also fail.

If several clients in one VLAN fail to get DHCP, escalate with scope and ports, because the cause may be DHCP server availability, a missing DHCP relay ( ip helper-address ) on a routed segment, or a wrong VLAN that has no path to the server. A single isolated client is usually local; a whole VLAN failing points to shared infrastructure.

User B - DNS Failure

User B: 172.16.8.144/24 , gateway 172.16.8.1 , but DNS 192.168.1.1 . Pings to 172.16.8.1 and 8.8.8.8 succeed, yet intranet.company.local and external names fail. IP forwarding works, so the gateway is fine - this is the textbook DNS signature where everything works by address but nothing works by name. The wrong DNS server may come from a bad DHCP scope option, a manual override left on the NIC, VPN software that pushed its own resolver, or a rogue DHCP server .

Test with nslookup intranet.company.local and watch which server answers; if it is 192.168.1.1 instead of the approved 172.16.8.10 , the resolver itself is the problem. Compare DNS settings to a healthy client and confirm whether correcting DNS is authorized or requires escalation.

User C - Wrong Default Gateway

User C: 172.16.8.160/24 , DNS 172.16.8.10 , but gateway 172.16.80.1 (note the extra digit - 8 became 80 ). The user can print to 172.16.8.25 yet cannot reach the Internet. Same-subnet traffic works because the host recognizes the destination is local, resolves the destination MAC via ARP (Address Resolution Protocol), and sends the frame directly without involving the gateway. Off-subnet traffic fails because the host tries to forward it to 172.16.80.1 , which is not even in its own 172.16.8.0/24 subnet, so the host cannot ARP for it and the packet is dropped.

Likely causes: bad DHCP option, manual gateway typo, or a wrong network profile. Compare to a known-good client and capture the DHCP lease before changing shared infrastructure.

The Core Lesson

One complaint, 'network is down,' maps to three different causes. DHCP failure can stop the client joining IP entirely. DNS failure leaves IP intact but breaks normal app use. Gateway failure preserves local access while killing remote access. The right next step is the one that narrows the pattern with the least disruption. If an engineer asks for a Wireshark capture, capture during DHCP renewal or DNS lookup and save the file; do not interpret beyond your training without noting assumptions.

A Quick Decision Workflow

When a 'no network' ticket arrives, run this fast triage in order and let the first failure tell you which service to chase:

Does the client have an IP in the expected subnet? No -> DHCP path (User A pattern).

Can it ping its own gateway? No, and the gateway is off-subnet -> wrong gateway (User C pattern).

Can it ping an external IP such as 8.8.8.8 ? No -> routing, firewall, NAT, or ISP.

Can it ping an external IP but not resolve names? -> DNS (User B pattern).

This ordering matches the layered model: addressing before reachability, reachability before name resolution. Skipping ahead - say, blaming DNS while the client actually has an APIPA address - sends you down the wrong path entirely, because a client with no lease has no working DNS configuration to begin with.

Finally, weigh disruption before acting. Renewing one client's lease is low-risk and reversible. Editing a DHCP scope option, changing the DNS server pushed to a whole subnet, or correcting a gateway in a shared scope affects every client and belongs to the team that owns that scope. Match the size of your action to the size of the evidence: a single-client symptom rarely justifies a network-wide change, and a network-wide symptom rarely justifies poking at one laptop.

Common Traps

Calling User C a 'DNS problem' when the gateway is the fault.

Renewing a lease before confirming the client is on the right VLAN.

Overlooking a one-digit gateway typo ( 172.16.80.1 vs 172.16.8.1 ).

Editing a shared DHCP scope to fix a single client's symptom.