Study guide
Using the Six Official Topic Areas
CCST Networking Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation, Official Sources, and Exam Strategy
Official Exam Profile and Source Hierarchy Registration, Delivery, Attempts, and Results Using the Six Official Topic Areas Building a Practical Study Plan Exam Strategy Without Unsupported Shortcuts Ethical Preparation and Path Forward
2 Network Standards, Models, and Common Protocols
Network Building Blocks OSI and TCP/IP Models Frames, Packets, Segments, and Data Flow Network Types and Scope Cloud, On-Premises, Protocols, and Ports Bandwidth, Throughput, Latency, and Jitter
3 Chapter 3: IPv4, IPv6 Addressing, and Subnet Formats
3.1 Public, Private, and Local Addressing 3.2 IPv4 Dotted Decimal and Binary Basics 3.3 Subnet Masks, CIDR, and Prefix Lengths 3.4 Subnet Logic, Host Ranges, and Gateways 3.5 IPv6 Address and Prefix Formats 3.6 MAC vs IP in Addressing Troubleshooting
4 Endpoints, Media, Cabling, and Client Connectivity
Endpoint Devices and Network Roles Network Interface Cards and Link Status Copper, Fiber, Coax, and Connector Basics Wired, Wi-Fi, and Cellular Access Methods Interference, Signal Quality, and Physical Reliability Client Connectivity Checks by Operating System
5 Infrastructure Devices, Ports, and Physical Installation
Infrastructure Device Roles Ports, Connectors, and Device Identification Cisco Device LEDs and Status Checks Network Diagrams and Cabling Instructions Power over Ethernet and Powered Devices Racks, Patch Panels, and Installation Basics
6 Switching, Routing, and Network Services
Basic Switching and MAC Learning VLANs and Local Boundaries Routing, Default Gateway, and ARP DNS, DHCP, and NAT Services Transport-Layer Services Small Network Traffic Flow
7 Troubleshooting Methodology, Ticketing, and Documentation
Help Desk Intake and Information Gathering Scope, Impact, and Prioritization Reproduce, Isolate, and Escalate Ticket Quality and Operational Documentation User Communication and Change History Physical, Data Link, and Network Layer Triage
8 Diagnostic Commands, Packet Capture, and Device Data
Command-Line Triage and Ping Path and Client Configuration Commands DNS and Socket Diagnostics Wireshark Capture and Save Device Access and Data Collection Basic Cisco Show Commands
9 Security, Firewalls, Wireless, and Safe Defaults
Firewall Filtering and Traffic Policy Least Privilege, AAA, Passwords, and MFA Wireless Security, WPA2, WPA3, and WPAx Guest Networks, Segmentation, and Shared Devices Common Threats and Safe User Practices Secure Home Router Baseline
10 Integrated Small Network Build and Repair Labs
Lab 1: Build a Basic Office LAN Lab 2: Repair No Internet After an Office Move Lab 3: Wireless Clients Cannot Reach Local Resources Lab 4: DHCP, DNS, and Default Gateway Symptoms Lab 5: Switch, Router, and Service Boundaries Lab 6: Escalation, Documentation, and Handoff
11 CCST to CCNA Career Path and Operational Readiness
Entry-Level Networking Roles and Expectations CCST vs CCNA and the Cisco Roadmap NetAcad 70-Hour Path and Study Plan Lab Habits for Real Operational Readiness Ethical Preparation, Portfolio, and Logbook Exam Scheduling Calendar and Readiness Check
12 Final Review, Exam Day, and Remediation Plan
Final Review Map to Official Objectives 50-Minute Exam Day Timing Unsupported Facts and Ethical Preparation Retake Planning Before the First Attempt Post-Fail Remediation Workflow Post-Pass Next Steps and Validity
Using the Six Official Topic Areas
Key Takeaways Explain This Topic AI
The six official topic areas are Standards and Concepts, Addressing and Subnet Formats, Endpoints and Media Types, Infrastructure, Diagnosing Problems, and Security.
A complete study plan maps every Cisco objective to one of the six topic areas.
The exam expects recognition, interpretation, and support decisions, not only vocabulary recall.
Cisco publishes no public per-domain weight or passing score, so balance coverage across all six areas.
Last updated: June 2026
Turn the Blueprint Into a Working Checklist
Cisco's official CCST Networking exam topics are organized into six numbered domains: 1.0 Standards and Concepts , 2.0 Addressing and Subnet Formats , 3.0 Endpoints and Media Types , 4.0 Infrastructure , 5.0 Diagnosing Problems , and 6.0 Security . These six areas should become the top-level tabs in your notes. If a lesson, video, lab, or practice question cannot be filed under one of them, ask whether it is truly needed for 100-150 or whether it belongs to a later CCNA-level plan.
A note on weighting: Cisco does not publish a public percentage weight for each CCST Networking domain, and it does not publish a public passing score. Any chart showing exact per-domain percentages or a "70% to pass" figure is a third-party estimate, not a Cisco fact. The safe strategy is to treat all six domains as testable and aim for balanced competence rather than chasing a supposedly heavier domain.
What Each Domain Asks of a Support Technician
Domain Core question you must answer Example skill
1.0 Standards and Concepts What problem does this concept solve? Bandwidth (capacity) vs throughput (achieved rate)
2.0 Addressing and Subnet Formats Is this address valid for the local network? Recognize a private IPv4 range or a malformed IPv6
- 3.0 Endpoints and Media Types Right cable, right port, right device? Pick the correct cable type and connector
- 4.0 Infrastructure What role does this device play? Tell a switch from a router from a firewall
- 5.0 Diagnosing Problems What is the next reasonable step? Read a symptom and choose ping vs ipconfig
- 6.0 Security What is the safe baseline? Choose WPA2/WPA3 over an open network
- 1.0 Standards and Concepts
This is the foundation: network building blocks; bandwidth versus throughput ; network scopes such as LAN, WAN, MAN, CAN, PAN, and WLAN ; cloud versus on-premises services; and common applications and protocols. The goal is not to recite every standards body or memorize every port. The goal is to explain what problem a concept solves. Bandwidth is a capacity ceiling; throughput is the data rate actually achieved under real conditions. A cloud service changes where an application is hosted and managed, but it still depends on addressing, routing, DNS, security, and reliable connectivity.
2.0 Addressing and Subnet Formats
This covers IPv4, IPv6, public versus private addresses, subnet masks, CIDR-style prefixes, and default-gateway logic. At CCST depth you should identify valid IPv4 and IPv6 formats, recognize the private ranges (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16), understand what a mask or prefix length communicates, and explain why a client needs an address, a mask or prefix, a gateway, and DNS. You do not solve enterprise design problems, but you need enough fluency to notice when a client address is obviously wrong for its local network, for example an APIPA address in the 169.254.x.x range that signals a DHCP failure.
3.0 Endpoints and Media Types
This connects devices to networks: differentiate endpoint devices, LAN cables and connectors, Wi-Fi, cellular, and wired technologies. It is practical. Given a diagram, can you attach the right cable to the right port? Can you set up and verify connectivity on Windows, Linux, macOS, Android, and Apple iOS? Can you distinguish a client-device problem from a media problem from an upstream network issue?
4.0 Infrastructure
This covers routers, switches, wireless access points, firewalls, ports, status lights, and basic routing and switching concepts. A support technician rarely designs the network but often becomes the hands and eyes for an engineer: identifying ports, reading device status lights when instructed, and confirming physical connectivity. Emphasize recognizing roles and collecting evidence, not redesigning production.
5.0 Diagnosing Problems and 6.0 Security
Diagnosing turns knowledge into behavior: troubleshooting methodology, help-desk best practices, ticketing, documentation, information gathering, packet capture with Wireshark , basic diagnostic commands, data-collection methods, and basic Cisco show commands. Security closes the frame: firewalls, foundational security concepts, and basic wireless security on a home router using WPA2/WPA3 (WPAx) . Study all six domains in rotation and keep a running count of missed items by domain, because weakness in any single area can make an otherwise simple support scenario feel confusing.
Why a Checklist Beats Sequential Cramming
The six domains are not independent silos; they interlock in every real scenario. A "no Internet" ticket can touch addressing (a bad DHCP lease), endpoints (an unplugged cable), infrastructure (a downed AP), diagnostics (which command to run first), and security (a firewall rule) all at once. If you study domain 1 thoroughly, forget it while you study domain 5, and never revisit it, you will recognize each concept in isolation but stall when a question blends them. The fix is rotation: revisit earlier domains in short, spaced review sessions so they stay loaded.
Use the six domains as a literal coverage checklist. After each study block, tick the domain you touched and note any objective you only skimmed. Before scheduling, every box should be ticked twice, once for exposure and once for performance. When you take practice questions, tag each one with its domain so your missed-question log reveals a pattern instead of a pile. A pattern is actionable: "I miss addressing items" tells you exactly what to repair. A pile tells you nothing.
Study Checkpoint
Recreate the six numbered domains (1.0 through 6.0) from memory and file every objective under one.
Remember Cisco publishes no public per-domain weight or passing score, so balance coverage across all six.
Practice the technician action: observe, document, test, fix when supported, or escalate.