Study guide

HD Machine Setup and Monitoring

CDN Certified Dialysis Nurse Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Map and Kidney Disease

CDN Exam Format and Blueprint CKD, AKI, and Stages of Kidney Disease Uremia, Fluid, and Electrolyte Imbalance Anemia, Bone Mineral, and Comorbidities Patient Assessment and Lab Interpretation

2 Hemodialysis Core

HD Principles and Dialysis Adequacy (Kt/V, URR) Vascular Access: AVF, AVG, and Catheters Dialyzers, Dialysate, and Water Treatment HD Machine Setup and Monitoring Anticoagulation and Circuit Management

3 Hemodialysis Complications

Intradialytic Hypotension and Cramps Access Complications and Infection Dialyzer Reactions and Air Embolism Medication Management in HD Patient Education and Self-Care in HD

4 Peritoneal Dialysis

PD Modalities: CAPD and APD PD Catheters and Exchange Technique Peritonitis and Exit-Site Infection PD Adequacy and Ultrafiltration PD Troubleshooting and Patient Training

5 Transplant, Acute Therapies, and Exam Day

Kidney Transplant Basics for CDN CRRT and Acute Kidney Therapies Infection Control and Safety Across Modalities CDN Exam Strategy and Review

HD Machine Setup and Monitoring

Key Takeaways Explain This Topic AI

Pre-treatment verification includes patient ID, prescription, access assessment, and machine alarm tests per facility checklist.

Arterial and venous pressure alarms detect disconnections, clotting, and needle infiltration early.

Blood leak detectors and air detection systems prevent catastrophic extracorporeal events.

Pre- and post-dialysis weights anchor ultrafiltration goals against prescribed dry weight.

Never leave a patient unattended during initial cannulation and circuit connection phases.

Last updated: July 2026

HD Machine Setup and Monitoring

Quick Answer: Safe HD requires systematic machine setup , circuit priming , alarm verification , and continuous intradialytic monitoring of pressures, blood flow, UF goals, and patient symptoms—never bypass safety devices.

Hemodialysis machines are complex fluidics controllers integrating blood pumps, dialysate mixers, ultrafiltration controllers, and multiple redundant alarms. The CDN exam tests whether nurses can sequence setup correctly, interpret pressure changes, and intervene before minor anomalies become air embolism, hemorrhage, or inadequate treatment. This section connects machine components to bedside actions tested across roughly half the NNCC blueprint.

Pre-Treatment Safety Checks

Before connecting any patient, verify two-patient identifiers , dialysis prescription (duration, Qb, dialysate K/Ca, UF goal, heparin order), and access suitability (thrill/bruit, signs of infection). Confirm machine disinfection status and that the previous patient data are cleared. Test alarm audio and ensure emergency stop function works.

Gather supplies: needles or catheter connectors, syringes, saline, gauze, pressure transducer filters, and PPE. Review allergies , fall risk , and isolation precautions . Weight the patient before HD using the same scale when possible; compare to dry weight and calculate interdialytic weight gain (IDWG) .

  • Pre-HD step CDN purpose
  • Identity + prescription match Wrong-patient/wrong-setting prevention
  • Access assessment Cannulation safety, infection detection
  • Pre-weight vs dry weight UF goal calculation
  • Lab review (K+, Hgb) Dialysate and symptom anticipation
  • Machine self-test / rinse Confirms alarm function

Trap: Starting UF before confirming prescription potassium bath when morning K+ is 6.0 — always match dialysate to order and labs.

Circuit Priming and Connection

Priming expels air from the blood circuit with saline before patient connection. Follow manufacturer sequence: dialyzer orientation (blood inlet/outlet), blood lines, heparin line, and venous chamber level set per policy. Air detection must remain enabled—never disable to silence nuisance alarms without fixing cause.

Cannulate AVF/AVG or connect catheter lumens using aseptic technique . Secure lines with tape or guards to prevent needle dislodgement. Connect arterial line to access, slowly increase blood pump speed to prescription while watching arterial pressure (negative) and venous pressure (positive). Sudden pressure swings suggest needle malposition or infiltration.

Worked scenario: Shortly after starting Qb 300 mL/min, venous pressure spikes and the patient reports access pain. The nurse stops the blood pump, assesses for needle infiltration (swelling, resistance), and recannulates if needed before resuming treatment. CDN trap: ignoring rising venous pressure risks hematoma and inadequate dose delivery.

Alarm Interpretation

Arterial pressure alarm (high negative): access kinking, clot, excessive Qb for access flow, or collapsed vein—reduce Qb, reposition lines, assess access.

Venous pressure alarm (high positive): clot in drip chamber or dialyzer, kinked venous line, needle against vessel wall, or outflow stenosis—inspect circuit, flush if ordered, notify if persistent.

Blood leak detector: membrane rupture or visible red in effluent path— stop blood pump , clamp lines, return blood per protocol, replace dialyzer.

Air detector: microbubbles in venous return—stop pump, clamp venous line, locate air entry (loose connections, empty saline bag), do not restart until cleared.

UF control alarms: may reflect rapid fluid removal limits; correlate with hypotension symptoms.

  • Alarm First action CDN trap
  • Air detector Stop pump, clamp venous Increasing Qb to "push air through"
  • Blood leak Stop pump, replace dialyzer Continuing with heparin only
  • High venous pressure Stop pump, assess access Assuming machine malfunction
  • Conductivity (dialysate) Stop dialysate delivery Silencing without investigation
  • Intradialytic Monitoring Parameters

Monitor blood pressure at least every 30 minutes—or more often if symptomatic. Track heart rate , temperature if febrile history, and mental status . Record Qb, Qd, achieved UF, cumulative fluid removed , and symptoms (cramping, chest pain, nausea).

Transmembrane pressure (TMP) trends help detect clotting or membrane fouling—rising TMP may precede dialyzer clot. Delivered time must match prescription for adequacy even when pressures look stable.

Ending treatment: measure post-weight , compare to estimated dry weight , assess hemostasis at needle sites (extended bleeding may indicate excess anticoagulation). Post-HD blood pressure before ambulation reduces fall risk.

Patient Education and Machine-Adjacent Risks

Educate patients not to manipulate blood pump or UF settings . Eating large meals during HD increases intradialytic hypotension risk via splanchnic vasodilation. Ensure call light access and footrest stability.

Power failure protocols: machines have battery backup for return of blood; nurses must know manual crank procedures per training. Fire/evacuation drills include how to clamp and cap lines quickly.

Documentation Requirements

Document pre/post weights, actual treatment time, UF removed, anticoagulant dose, access type, needle gauges/sites, and any alarms with interventions. CDN vignettes often ask what was not documented when a complication occurred.

Exam Traps

Air embolism prevention requires priming and air detectors—left lateral Trendelenburg if embolism suspected.

Blood leak means stop pump—not just increase UF.

Pre-weight drives UF goal; post-weight evaluates dry-weight accuracy.

Venous pressure rise is an early infiltration/clot clue—not always a machine malfunction.

Never leave patient unattended during initial cannulation and circuit connection.

Handoff and Shift Communication

Report alarm events , delivered UF vs goal , and access complications to oncoming staff. Incomplete handoff after a blood leak or air alarm event risks repeating the same setup error on the next patient.

Machine alarms exist to prevent catastrophes. CDN-level practice integrates alarm response with patient assessment every treatment.