Study guide

4.4 Audio Levels and Recording Peripherals

AAERT Certified Electronic Reporter CER

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Ethical Obligations

1.1 Current Exam Blueprint and Ethical Conduct 1.2 Conflicts of Interest and Appearance of Impropriety 1.3 Gifts, Fees, Accuracy, and Record Duties

2 Chapter 2: Confidentiality and Information Control

2.1 Confidentiality and Non-Disclosure Agreements 2.2 Job-File Security, Equipment Protection, and HIPAA 2.3 Audio Requests, Sealed Material, and Controlled Release

3 Chapter 3: Professional Behavior

3.1 The Impartial Reporter and Professional Client Service 3.2 Courtroom, Non-Courtroom, and Remote Etiquette 3.3 Demeanor, Appearance, Punctuality, Attention, and Disruptions

4 Chapter 4: Digital Audio Hardware

4.1 Digital Audio Systems, Interfaces, and Power 4.2 Microphone Types, Pickup Patterns, Cost, Cables, and Connectors 4.3 Multi-Channel Assignment and Channel Isolation 4.4 Audio Levels and Recording Peripherals

5 Chapter 5: Software, Annotations, Setup, and Testing

5.1 Recording Software, Confidence Monitoring, Playback, Realtime, and ASR 5.2 Speaker Changes, Abbreviations, Timestamps, and Annotation Priorities 5.3 Equipment Setup in Live, Dead, and Variable Rooms 5.4 Testing Installed and Mobile Equipment

6 Chapter 6: Reliability and Reporter Duties

6.1 Basic Troubleshooting and Technical Escalation 6.2 Audio and Computer Maintenance 6.3 Participant Instructions, Record Status, Clarification, and Oaths 6.4 Remote and Hybrid Proceedings

7 Chapter 7: Collaborators, Exhibits, and Transcript Orders

7.1 Working with Interpreters 7.2 Working with Legal Videographers 7.3 Physical and Electronic Exhibits and Chain of Custody 7.4 Transcript Orders, Roughs, Expedites, Originals, Copies, and Estimates

8 Chapter 8: Transcript Production Workflow

8.1 Accurate Transcript Production and Special Record Events 8.2 Pre-Proceeding Meetings, Appearances, Read-Ons, and Stipulations 8.3 Post-Proceeding Spellings, Job Information, Distribution, Archival, and Retention

9 Chapter 9: Federal Rules and Types of Proceedings

9.1 Federal Transcript Orders and Rule 30 Review 9.2 Trials, Hearings, and Court Proceedings 9.3 Depositions, EUOs, Arbitrations, Mediations, Meetings, and Statements 9.4 Order of Proceedings and the Reporter's Role

10 Chapter 10: Case Life Cycle and Participants

10.1 Civil and Criminal Case Life Cycles 10.2 Parties and People in Proceedings 10.3 Witness Types and Testimony 10.4 Reading Legal Documents Relevant to Reporters

11 Chapter 11: Jurisdiction, Case Law, and Trials

11.1 Jurisdiction, Venue, and Civil versus Criminal Proceedings 11.2 Case Law and Citation Elements 11.3 Jury Selection and Bench versus Jury Trials 11.4 Sidebars, Bench Conferences, and In-Camera Proceedings

12 Chapter 12: Legal Terminology

12.1 Core Courtroom Actions and Roles 12.2 Civil Pleadings, Discovery, and Remedies 12.3 Criminal Procedure Terminology 12.4 Evidence, Foundations, Privilege, and Objections

13 Chapter 13: Latin and Medical Terminology

13.1 Common Latin Legal Terms 13.2 Medical Word Building, Positions, Tests, and Treatment Terms 13.3 Body Systems, Pathology, and Diagnostic Language

4.4 Audio Levels and Recording Peripherals

Key Takeaways Explain This Topic AI

Gain is set high enough for intelligible speech above the noise floor but low enough to preserve headroom and avoid clipping.

Fader position, preamplifier gain, recorded level, and headphone volume control different parts of the path.

Useful peripherals include closed-back headphones, approved storage, backup capture, UPS equipment, and tested adapters and cables.

Automatic gain control and noise processing can help in some systems but can also pump noise, distort transients, or hide routing problems.

Last updated: September 2026

Gain staging

Gain staging sets appropriate signal level at each point from microphone preamplifier through software and storage. If the preamp is too low, speech sits near the system noise floor and later amplification raises hiss with it. If too high, peaks exceed the available range and clip , flattening the waveform and creating distortion that later volume reduction cannot repair. Leave headroom for laughter, raised voices, coughs, gavels, and participants who move closer.

Do not memorize a universal meter number unless the governing system specifies one. Meters may show peak, average, full-scale, or proprietary scales. Learn the approved equipment, test normal and loud speech, and monitor trends throughout the job. A healthy moving meter can still represent the wrong source, hum, or unintelligible reverberation.

Know the controls

  • Control Primary effect Common mistake
  • Microphone preamp gain Level entering the interface Raising it until loud speech clips
  • Channel fader Mix or routed output level Assuming it always changes isolated recording
  • Track/input trim Software record-path level Adjusting the wrong track
  • Headphone volume What the reporter hears Turning it up and believing the recorded level changed
  • Playback level Review output Confusing playback comfort with source quality

Before changing a control, identify whether it affects the recorded file, public-address feed, remote send, monitor mix, or all of them. Make small changes and confirm the recorded return.

Active adjustment

The blueprint expects reporters to know how to actively adjust tracks . Active does not mean continuously chasing every syllable. Set a stable starting gain during sound check, observe normal variation, and intervene when a persistent change threatens quality. If a witness turns away, first correct microphone position or speaking behavior when appropriate; large gain increases may amplify the entire room. If counsel suddenly speaks loudly near a sensitive microphone, reduce the affected input enough to prevent repeated clipping while preserving intelligibility.

Use per-channel adjustments so one loud source does not force every track down. Note material configuration changes when the workflow requires it, especially if a participant moves or an input is replaced.

Processing cautions

Automatic gain control (AGC) raises quiet passages and lowers loud ones. It can be helpful in constrained systems but may raise ventilation noise during pauses or audibly pump levels. Noise reduction, echo cancellation, limiters, and filters can improve a feed, yet aggressive processing can remove consonants, add artifacts, or mask the cause of a fault. Preserve an approved minimally processed source when required and do not experiment destructively on the only recording.

Peripherals

A peripheral supports capture, monitoring, power, control, or storage. Important examples include:

  • closed-back headphones that limit room leakage and reveal noise or missing channels;
  • a compatible foot controller or shortcut device when authorized for playback;
  • approved external storage with sufficient capacity and secure handling;
  • a UPS sized for the workstation, interface, and any essential network device;
  • backup recorders or computers configured and tested for the assignment;
  • cable testers, powered hubs, adapters, and spare cables approved for the system; and

network adapters or headsets used for remote proceedings.

Consumer Bluetooth audio can introduce latency, compression, battery risk, and unexpected profile changes. Use it only if the approved system and assignment permit it. A USB hub can simplify connections but may create bandwidth or power limits; connect high-bandwidth interfaces as specified by the manufacturer or administrator.

Monitoring exercise

During test, have each participant speak normally and loudly. Listen for clipping, electrical hum, room echo, clothing noise, and adjacent-channel bleed. Confirm the software writes a file, then stop and play it from storage. Check headphones separately from courtroom playback. Verify remaining capacity and backup operation.

The best exam answer usually addresses the source of the level problem. Turning up headphones fixes only reporter comfort. Normalizing a damaged file later does not undo clipping. Moving a microphone closer may improve signal-to-noise more effectively than increasing gain.

Exam application

A witness whispers while counsel occasionally shouts. Raising gain until whispers look large on the meter may clip counsel and amplify ventilation. A better response combines closer placement or a speaking reminder, independent channel control, and enough headroom for peaks. If automatic gain control is active, listen for room noise surging during pauses. The correct setting is demonstrated by intelligible stored playback across expected levels, not by keeping every waveform visually large.