Study guide
6.2 Audio and Computer Maintenance
AAERT Certified Electronic Reporter CER
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ethical Obligations
1.1 Current Exam Blueprint and Ethical Conduct 1.2 Conflicts of Interest and Appearance of Impropriety 1.3 Gifts, Fees, Accuracy, and Record Duties
2 Chapter 2: Confidentiality and Information Control
2.1 Confidentiality and Non-Disclosure Agreements 2.2 Job-File Security, Equipment Protection, and HIPAA 2.3 Audio Requests, Sealed Material, and Controlled Release
3 Chapter 3: Professional Behavior
3.1 The Impartial Reporter and Professional Client Service 3.2 Courtroom, Non-Courtroom, and Remote Etiquette 3.3 Demeanor, Appearance, Punctuality, Attention, and Disruptions
4 Chapter 4: Digital Audio Hardware
4.1 Digital Audio Systems, Interfaces, and Power 4.2 Microphone Types, Pickup Patterns, Cost, Cables, and Connectors 4.3 Multi-Channel Assignment and Channel Isolation 4.4 Audio Levels and Recording Peripherals
5 Chapter 5: Software, Annotations, Setup, and Testing
5.1 Recording Software, Confidence Monitoring, Playback, Realtime, and ASR 5.2 Speaker Changes, Abbreviations, Timestamps, and Annotation Priorities 5.3 Equipment Setup in Live, Dead, and Variable Rooms 5.4 Testing Installed and Mobile Equipment
6 Chapter 6: Reliability and Reporter Duties
6.1 Basic Troubleshooting and Technical Escalation 6.2 Audio and Computer Maintenance 6.3 Participant Instructions, Record Status, Clarification, and Oaths 6.4 Remote and Hybrid Proceedings
7 Chapter 7: Collaborators, Exhibits, and Transcript Orders
7.1 Working with Interpreters 7.2 Working with Legal Videographers 7.3 Physical and Electronic Exhibits and Chain of Custody 7.4 Transcript Orders, Roughs, Expedites, Originals, Copies, and Estimates
8 Chapter 8: Transcript Production Workflow
8.1 Accurate Transcript Production and Special Record Events 8.2 Pre-Proceeding Meetings, Appearances, Read-Ons, and Stipulations 8.3 Post-Proceeding Spellings, Job Information, Distribution, Archival, and Retention
9 Chapter 9: Federal Rules and Types of Proceedings
9.1 Federal Transcript Orders and Rule 30 Review 9.2 Trials, Hearings, and Court Proceedings 9.3 Depositions, EUOs, Arbitrations, Mediations, Meetings, and Statements 9.4 Order of Proceedings and the Reporter's Role
10 Chapter 10: Case Life Cycle and Participants
10.1 Civil and Criminal Case Life Cycles 10.2 Parties and People in Proceedings 10.3 Witness Types and Testimony 10.4 Reading Legal Documents Relevant to Reporters
11 Chapter 11: Jurisdiction, Case Law, and Trials
11.1 Jurisdiction, Venue, and Civil versus Criminal Proceedings 11.2 Case Law and Citation Elements 11.3 Jury Selection and Bench versus Jury Trials 11.4 Sidebars, Bench Conferences, and In-Camera Proceedings
12 Chapter 12: Legal Terminology
12.1 Core Courtroom Actions and Roles 12.2 Civil Pleadings, Discovery, and Remedies 12.3 Criminal Procedure Terminology 12.4 Evidence, Foundations, Privilege, and Objections
13 Chapter 13: Latin and Medical Terminology
13.1 Common Latin Legal Terms 13.2 Medical Word Building, Positions, Tests, and Treatment Terms 13.3 Body Systems, Pathology, and Diagnostic Language
6.2 Audio and Computer Maintenance
Key Takeaways Explain This Topic AI
Preventive maintenance covers microphones, cables, connectors, interfaces, batteries, computers, storage, software, and backups.
Updates should be authorized, documented, and tested outside the critical pre-job window with a rollback or recovery plan.
Visual inspection, functional testing, battery tracking, storage-health review, and inventory reduce predictable failures.
Maintenance records distinguish recurring faults from one-time incidents and support timely replacement.
Last updated: September 2026
Preventive rather than reactive
Maintenance occurs on a schedule, not only after failure. Create an inventory with device identifiers, location, firmware or approved configuration, purchase or service information, battery dates, known issues, and assigned spares. Follow manufacturer and organization guidance. A component can pass power-on yet fail under movement, sustained recording, or battery load, so functional exercise matters.
Audio equipment
Inspect microphones for damaged grilles, capsules, goosenecks, clips, switches, and connectors. Keep them dry and clean using approved methods; liquids or compressed air can damage some capsules. Test each microphone at normal cable length and move the cable gently to reveal intermittence.
Inspect cables end to end for cuts, crushed sections, exposed shielding, bent pins, loose latches, and poor strain relief. Label tested cables without wrapping adhesive where it damages the jacket. Retire unreliable cables rather than marking them “sometimes works.” Check mixers and interfaces for noisy controls, loose jacks, overheating, clock or driver errors, and stable connection under realistic multichannel load.
Track rechargeable batteries by age and performance. A battery that shows full but collapses quickly under load is not a dependable spare. Store and charge according to manufacturer safety instructions; inspect for swelling, leakage, heat, or physical damage and remove unsafe batteries from service.
Computer and storage maintenance
Maintain:
- approved operating-system and security updates;
- recording application, drivers, firmware, licenses, and platform compatibility;
- sufficient local storage and healthy backup destinations;
- endpoint protection and account controls required by policy;
- clean ventilation, fans, ports, and stable power;
- accurate date and time configuration; and
tested restore media, configuration notes, and support contacts.
Do not use free space as the only storage-health measure. Monitor system warnings and organizational health tools. Preserve records before maintenance and follow authorized disposition; clearing a drive is not a substitute for a retention decision.
Update discipline
Updates can repair vulnerabilities and compatibility problems, but they can also change permissions, device names, drivers, or audio routing. Use a controlled sequence:
Review release and compatibility information.
Confirm authorization and backup current configuration or data.
Update a noncritical or test system first when possible.
Reboot and test every input, channel, annotation, file-write, playback, export, backup, and remote function.
Record the tested versions and result.
Keep a documented recovery or escalation path.
Avoid optional updates immediately before a proceeding. Deferring an urgent security update may also be unacceptable; follow the administrator's decision and use a tested alternate system if necessary.
Cleaning and environment
Dust blocks cooling and damages connectors. Store equipment in protective cases, control moisture and temperature, and avoid leaving devices in hot or freezing vehicles. Keep food and liquids away. Secure small adapters so they do not disappear between jobs. Coil cables without sharp bends and separate known-good, untested, and failed items.
Maintenance testing
Periodically run a duration test approximating a real proceeding: record all channels, annotate, monitor, switch to backup power if authorized, close files, replay isolated tracks, and restore a backup. A backup that has never been restored is unverified. Test alert volume and visibility; warning sounds are useless if monitoring settings suppress them.
Records and replacement
Log date, technician or reporter, inspection, version changes, faults, corrective action, and final test. Repeated dropouts on the same port or cable indicate replacement or professional service. Do not return a failed device to the ready kit without a verified repair.
The exam distinguishes maintenance from live troubleshooting . Maintenance reduces risk before the job; troubleshooting isolates a present symptom. Both end with recorded verification, not assumption.
Exam application
A maintenance log shows three intermittent dropouts from the same USB port over two months. Passing a short test today does not erase that pattern. Remove the unreliable path from ready service, arrange authorized repair or replacement, and test the replacement under sustained multichannel load. In contrast, a damaged cable clearly isolated and replaced with a known-good tested spare may need no system-wide rebuild. Maintenance questions reward trend recognition, documented disposition, and verification—not the hope that a recurring fault will wait until after the next job.
Review checkpoint
Keep failed equipment physically separated from ready equipment and label its status. A future reporter should not be able to select an intermittent cable merely because it was returned to the same case.