Study guide
5.3 Equipment Setup in Live, Dead, and Variable Rooms
AAERT Certified Electronic Reporter CER
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Ethical Obligations
1.1 Current Exam Blueprint and Ethical Conduct 1.2 Conflicts of Interest and Appearance of Impropriety 1.3 Gifts, Fees, Accuracy, and Record Duties
2 Chapter 2: Confidentiality and Information Control
2.1 Confidentiality and Non-Disclosure Agreements 2.2 Job-File Security, Equipment Protection, and HIPAA 2.3 Audio Requests, Sealed Material, and Controlled Release
3 Chapter 3: Professional Behavior
3.1 The Impartial Reporter and Professional Client Service 3.2 Courtroom, Non-Courtroom, and Remote Etiquette 3.3 Demeanor, Appearance, Punctuality, Attention, and Disruptions
4 Chapter 4: Digital Audio Hardware
4.1 Digital Audio Systems, Interfaces, and Power 4.2 Microphone Types, Pickup Patterns, Cost, Cables, and Connectors 4.3 Multi-Channel Assignment and Channel Isolation 4.4 Audio Levels and Recording Peripherals
5 Chapter 5: Software, Annotations, Setup, and Testing
5.1 Recording Software, Confidence Monitoring, Playback, Realtime, and ASR 5.2 Speaker Changes, Abbreviations, Timestamps, and Annotation Priorities 5.3 Equipment Setup in Live, Dead, and Variable Rooms 5.4 Testing Installed and Mobile Equipment
6 Chapter 6: Reliability and Reporter Duties
6.1 Basic Troubleshooting and Technical Escalation 6.2 Audio and Computer Maintenance 6.3 Participant Instructions, Record Status, Clarification, and Oaths 6.4 Remote and Hybrid Proceedings
7 Chapter 7: Collaborators, Exhibits, and Transcript Orders
7.1 Working with Interpreters 7.2 Working with Legal Videographers 7.3 Physical and Electronic Exhibits and Chain of Custody 7.4 Transcript Orders, Roughs, Expedites, Originals, Copies, and Estimates
8 Chapter 8: Transcript Production Workflow
8.1 Accurate Transcript Production and Special Record Events 8.2 Pre-Proceeding Meetings, Appearances, Read-Ons, and Stipulations 8.3 Post-Proceeding Spellings, Job Information, Distribution, Archival, and Retention
9 Chapter 9: Federal Rules and Types of Proceedings
9.1 Federal Transcript Orders and Rule 30 Review 9.2 Trials, Hearings, and Court Proceedings 9.3 Depositions, EUOs, Arbitrations, Mediations, Meetings, and Statements 9.4 Order of Proceedings and the Reporter's Role
10 Chapter 10: Case Life Cycle and Participants
10.1 Civil and Criminal Case Life Cycles 10.2 Parties and People in Proceedings 10.3 Witness Types and Testimony 10.4 Reading Legal Documents Relevant to Reporters
11 Chapter 11: Jurisdiction, Case Law, and Trials
11.1 Jurisdiction, Venue, and Civil versus Criminal Proceedings 11.2 Case Law and Citation Elements 11.3 Jury Selection and Bench versus Jury Trials 11.4 Sidebars, Bench Conferences, and In-Camera Proceedings
12 Chapter 12: Legal Terminology
12.1 Core Courtroom Actions and Roles 12.2 Civil Pleadings, Discovery, and Remedies 12.3 Criminal Procedure Terminology 12.4 Evidence, Foundations, Privilege, and Objections
13 Chapter 13: Latin and Medical Terminology
13.1 Common Latin Legal Terms 13.2 Medical Word Building, Positions, Tests, and Treatment Terms 13.3 Body Systems, Pathology, and Diagnostic Language
5.3 Equipment Setup in Live, Dead, and Variable Rooms
Key Takeaways Explain This Topic AI
A live room has stronger or longer reflections, while a dead room absorbs more sound; neither label alone determines a successful setup.
Setup begins with authority, participant layout, acoustics, noise sources, power, network, safety, and the complete signal map.
Closer microphone placement and source separation often improve intelligibility more reliably than aggressive processing.
The reporter re-evaluates setup when seating, doors, HVAC, remote connections, or participant behavior changes.
Last updated: September 2026
Live and dead rooms
A live room has reflective surfaces that return more sound energy, producing noticeable reverberation. Glass, stone, bare walls, and high ceilings can cause distant speech and overlapping voices to smear together. A dead room has more absorption and shorter reverberation; carpet, acoustic panels, heavy furnishings, and people reduce reflections. Extremely dead rooms may make distant microphones sound weak, but ordinary absorption usually helps speech clarity.
The terms are relative. Listen and test rather than labeling by appearance. Clap or speak from participant positions only if permitted, then assess decay, echo, ventilation, electrical noise, and sound from adjacent spaces. A room can be acoustically live yet contain local dead zones, or quiet before participants arrive but noisy when devices and HVAC operate.
Survey before placing equipment
Confirm:
- presiding official, room contact, and permission to connect to installed systems;
- expected participants, seating, movement, interpreters, and remote attendees;
- microphone and loudspeaker locations;
- power outlets, network paths, cable routes, exits, and accessible aisles;
sources such as HVAC, refrigerators, fluorescent supplies, projectors, paper, doors, street noise, and public galleries; and
where equipment can remain secure and visible to the reporter.
Do not move court or venue equipment without authorization. Do not tape across an exit or create a trip hazard to obtain an ideal acoustic position. Coordinate a safe alternative.
Setup responses
In a live room, move microphones closer to intended speakers, use appropriate directional patterns where practical, reduce unnecessary open microphones, and keep loudspeakers away from microphone pickup. Soft furnishings or temporary treatment may help only if authorized. Lowering gain does not by itself improve a weak distant signal; it lowers speech and room together.
In a more absorptive room, confirm that every speaker remains within useful range and that soft-spoken participants are not lost. Close placement still improves signal-to-noise. Avoid placing boundary microphones on surfaces that transmit keyboard, tapping, or paper noise. Use isolation pads or alternate placement if approved.
Build the setup systematically
Place the primary system and secure power.
Position and label microphones based on people and movement.
Route cables safely and connect the correct input types.
Assign software channels and labels.
Establish monitoring and courtroom playback without feedback.
Start the approved backup through a sufficiently independent path.
Test each source from the actual speaking position.
Record, stop, and play back every channel.
Document the channel map and exceptions.
For remote or hybrid work, test both directions and confirm that a remote reconnection does not silently change the selected device. If a room loudspeaker carries remote audio, prevent the same sound from returning through room microphones as delayed echo.
Variable conditions
People absorb sound, so an empty-room test may not match a full courtroom. Doors open, jurors move, counsel approaches a lectern, and witnesses lean away. Wireless devices can lose battery or encounter interference. HVAC may cycle on. The reporter continues listening and adjusts under protocol.
A participant who moves repeatedly may need a different microphone plan or a reminder to use the designated position. Avoid compensating solely with high gain, which magnifies the room. If a noise source cannot be removed, document and escalate it rather than applying untested filtering to the only source.
Setup failures and restraint
A common error is overcomplication: too many microphones, adapters, and software layers create more failure points than the reporter can monitor. Use enough coverage and redundancy for the assignment, but favor tested, labeled, supportable components. A simple approved backup is valuable only if it captures intelligible audio and the reporter knows how to transition.
The exam's best setup answer considers acoustics, safety, compatibility, monitoring, and actual playback. A visually tidy setup is not adequate if the witness channel is unintelligible.
Exam application
In a glass conference room, a single distant omnidirectional microphone produces clear volume but long reverberant tails that blur overlapping speech. Moving appropriate microphones closer, assigning sources separately, and reducing unnecessary open pickup improves direct-to-reflected sound. Adding untested software noise suppression during testimony could create artifacts and should not be the first response. The CER answer should connect an observed room condition to a reversible, tested setup change while maintaining safe cable routes and participant access.
Three numbers that decide microphone placement
Acoustic judgment becomes repeatable once three relationships are understood.
Inverse square law. In a free field, sound pressure level falls about 6 dB for each doubling of distance from the source. Moving a microphone from 24 inches to 12 inches from a speaker therefore gains roughly 6 dB of direct speech without touching the gain control — and, critically, without raising the room's reverberant energy by the same amount. This is why proximity, not gain, is the primary tool in a live room.
Critical distance. Beyond a certain distance from the source, reflected energy exceeds direct energy and moving farther away stops making speech quieter so much as it makes speech muddier. A highly reverberant courtroom has a short critical distance; a well-treated conference room has a longer one. Placing microphones inside that distance is the practical goal.
The 3-to-1 rule. When several microphones cover different speakers, keep the distance between any two microphones at least three times the distance from each microphone to its own talker. A microphone 12 inches from a witness should sit at least 36 inches from the next microphone. Violating the rule produces comb filtering — a hollow, phase-smeared sound — when one voice arrives at two microphones at slightly different times.
RT60 is the standard reverberation measure: the time for sound to decay 60 dB after the source stops. Speech intelligibility suffers as RT60 rises; a hard-surfaced room with a long decay blurs consonants and overlapping speech regardless of level.
- Observation Placement response
- Voices sound distant and hollow Move closer; check 3-to-1 spacing
- One talker appears on several tracks Increase microphone spacing or narrow the pattern
- Raising gain raises noise as much as speech The microphone is beyond critical distance
- Long decay after a clap or a door Live room; shorten distance and reduce open microphones