Study guide
13.2 Cooling Methods and Equipment
Certified Food Protection Manager CFPM
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 ANAB-CFP Accreditation, FDA 2-102.12, and Providers 1.3 How to Use This Guide and Study for CFPM
2 Why Food Safety Matters
2.1 Foodborne Illness, Outbreaks, and High-Risk Populations 2.2 TCS Foods and How Contamination Occurs 2.3 Person in Charge and Active Managerial Control
3 Biological Hazards
3.1 Bacteria, FAT TOM, and Sporeformers 3.2 The Big Six Pathogens 3.3 Viruses, Parasites, and Fungi 3.4 Biological Toxins
4 Chemical, Physical, and Intentional Contamination
4.1 Chemical Contaminants and Toxic Metals 4.2 Physical Contaminants 4.3 Food Defense, ALERT, and Outbreak Response
5 Major Food Allergens
5.1 The Big Nine Allergens and Symptoms 5.2 Preventing Cross-Contact 5.3 Allergen Communication, Labeling, and Service
6 The Safe Food Handler
6.1 How Food Handlers Contaminate Food 6.2 Handwashing: When and How 6.3 Gloves, Bare-Hand Contact, and the Hygiene Program
7 Employee Health
7.1 Symptoms and Reporting Responsibilities 7.2 Exclusion vs Restriction 7.3 Return-to-Work Criteria for the Big Six
8 Time and Temperature in the Flow of Food
8.1 Cross-Contamination in the Flow of Food 8.2 Temperature Danger Zone and Time Limits 8.3 Thermometers, Calibration, and Monitoring
9 Purchasing and Receiving
9.1 Approved Suppliers and Purchasing Controls 9.2 Receiving Criteria and Rejection 9.3 Receiving Specific Foods
10 Storage
10.1 FIFO, Labeling, and Date Marking 10.2 Refrigerator Storage Order and Temperatures 10.3 Dry Storage, Frozen Storage, and Chemical Separation
11 Preparation
11.1 Thawing Methods 11.2 Produce, Eggs, Ice, and Other Prep Controls 11.3 Special Processes, Variances, and ROP
12 Cooking
12.1 Minimum Internal Cooking Temperatures 12.2 Consumer Advisories and Undercooked Foods 12.3 Microwave Cooking and Non-Continuous Cooking
13 Cooling and Reheating
13.1 Two-Stage Cooling Requirements 13.2 Cooling Methods and Equipment 13.3 Reheating for Hot Holding
14 Service and Display
14.1 Hot and Cold Holding 14.2 Time as a Public Health Control 14.3 Serving, Utensils, and Self-Service 14.4 Off-Site Service, Catering, Delivery, and Vending 14.5 Refilling Returnables and Reusable Containers
15 Food Safety Management Systems
15.1 Active Managerial Control Programs 15.2 HACCP Seven Principles 15.3 Crisis Management, Recalls, and Imminent Health Hazards
16 Facilities, Equipment, Pests, and Emergencies
16.1 Facility Design, Surfaces, and Equipment 16.2 Water, Plumbing, Backflow, and Waste 16.3 Integrated Pest Management 16.4 Facility Emergencies 16.5 Plan Review, Preoperational Inspection, and the Food Safety Management System
17 Cleaning and Sanitizing
17.1 Cleaning vs Sanitizing 17.2 Chemical Sanitizers: Chlorine, Iodine, Quats 17.3 Manual Warewashing and Dishmachines 17.4 Cleaning Programs, Chemical Storage, and SDS
18 Regulatory Compliance and Staff Training
18.1 FDA Food Code, Agencies, and Inspections 18.2 Record-Keeping and Legal Duties 18.3 Staff Training and Food Safety Culture
13.2 Cooling Methods and Equipment
Key Takeaways Explain This Topic AI
Food Code 3-501.15 cools by shallow pans, smaller or thinner portions, ice-water baths with stirring, ice paddles or ice as an ingredient, rapid-chill equipment, and metal containers that transfer heat.
A 5-gallon stockpot of soup cannot go straight into the walk-in; divide it or use an ice bath so the center can actually cool.
Do not cool at room temperature and then refrigerate; active cooling starts immediately.
Loosely cover cooling food, or leave it uncovered if protected from overhead contamination, and arrange pans for air flow.
Last updated: August 2026
A legal cooling clock without a legal cooling method is how leftover soup spends 4 hours at 90°F in a walk-in that is doing its job. The cooler cools air . It does not magically cool the center of a 5-gallon pot. FDA Food Code 3-501.15 lists the methods that actually move heat so 3-501.14 can be met.
Use one or more of these, based on the food:
- Place the food in shallow pans
- Separate it into smaller or thinner portions
- Use rapid cooling equipment (blast chiller, tumble chiller)
- Stir the food in a container set in an ice-water bath
- Use containers that facilitate heat transfer (metal, not deep insulating plastic)
- Add ice as an ingredient
- Other effective methods — including a clean ice paddle — that can be shown to hit the times
When the pans go into a cooler or cold-holding unit, 3-501.15(B) adds two setup rules: arrange containers so heat can leave through the walls, and loosely cover them, or leave them uncovered if they are protected from overhead contamination . Tight plastic wrap on a deep pan traps steam. A lid screwed down on a cambro is a thermos. Stacked pans are a wall.
- What Each Method Is For
- Shallow pans and thinner portions
Heat leaves through surface area . A 1-inch or 2-inch layer of chili in a hotel pan has a short path from the center to the metal. The same chili in a 6-inch-deep pan does not. Cut roasts. Spread rice. Ladle gravy into more pans, not a taller pan. “Smaller portions” also means pre-portioning leftover soup into shallow service pans instead of saving the kettle.
Ice-water bath with stirring
Set a metal pot or pan into a sink or larger container of ice and water . The ice water must reach up the sides of the food container, not just kiss the bottom. Stir so the hot center keeps touching the cold wall. An ice bath you do not stir is a cold ring around a hot core — the probe in the middle will fail the 2-hour gate. Replace melted ice. Do not call a pot sitting in a few cubes an ice bath.
Ice paddle and ice as an ingredient
A food-grade ice paddle (ice wand) is a sealed plastic paddle filled with water and frozen. It goes into the product so you stir cold mass through the center. Wash, rinse, and sanitize the exterior before it touches food; store it so the handle does not sit in the product after you are done. Ice as an ingredient works when the recipe can take the water: some soups, stews, and drinks. The ice must be potable ice that is itself a food, not ice that chilled raw fish. Account for dilution so you are not serving watery chili that still missed 70°F.
Blast chiller or tumble chiller
High-volume kitchens buy speed. A blast chiller drives cold air over shallow pans. A tumble chiller tumbles bagged product through cold water. These are 3-501.15 “rapid cooling equipment.” They are not a license to skip the probe. Overloading a blast-chiller rack recreates the stockpot problem inside an expensive box. Still log the 135°F start, the 70°F check, and the 41°F check.
Metal, not deep plastic
Stainless steel transfers heat . Thick plastic insulates . A deep plastic cambro of leftover chili with a snap lid is one of the most reliable ways to fail stage 1 while the walk-in air reads 38°F. If plastic is what you have for storage, cool first in metal or in an ice bath, then transfer the already-cold food into the plastic storage container.
Two Failures the Exam Loves
Do not put a 5-gallon stockpot of soup straight into the walk-in. The outer inch chills. The center stays in the 80°F–120°F band for hours. You have turned the walk-in into an incubator with a cold jacket. Divide the soup, use an ice-water bath and stir, drop in a clean ice paddle, or blast-chill shallow pans. The intact stockpot is not a method.
Do not cool at room temperature and then refrigerate. “Let it stop steaming so we don’t heat up the box” is how C. perfringens gets its window. Active cooling starts as soon as the cook or hot-hold step ends . If you are worried about walk-in recovery, that is an argument for an ice bath or blast chiller , not for a 90-minute counter rest. Room-temperature cooling is not on the 3-501.15 list.
Cover, Air Flow, and Where the Pan Sits
Loosely cover so heat and steam can leave, and so the surface is not a dust pan. Uncover only if 3-305.11 protection is real — a cover, sneeze guard, or location that stops overhead contamination. Do not cool uncovered chili on a speed rack under raw chicken. Do not cool uncovered pans on the floor . Arrange pans in a single layer with space between them so evaporator air can move. Do not nest pans. Do not jam a loaded rack against the back wall and block the fan.
Raw-below-ready-to-eat still applies while food cools. A cooling leftover is ready-to-eat once it was cooked. It does not belong under a leaking poultry case.
Method When to use it Common failure
Shallow pans Chili, gravy, refried beans, casseroles, rice A 4- to 6-inch-deep hotel pan that still has a hot center
Smaller / thinner portions Large-batch soup, sauce, whole roasts Leaving the 5-gallon stockpot intact
Ice-water bath with stirring Liquids and semi-liquids in a metal pot Ice only at the bottom; no stirring; a plastic pot that insulates
Ice paddle / ice as ingredient Soups, stews, drinks, recipes that can take ice A dirty paddle; non-potable ice; ice that only dilutes and never reaches the center
Blast chiller / tumble chiller High-volume leftovers; dense pans that need mechanical help Overloading the rack; skipping the probe log because “the machine is fast”
Metal pans, not deep plastic Any hot TCS being cooled Deep plastic cambro, tight lid, straight into the walk-in
Loose cover or uncovered if protected All cooling pans in a walk-in or blast chiller Tight wrap that traps heat; uncovered pans under dripping raw product
Air-flow arrangement Walk-in shelves or speed racks Stacked pans, nested hotel pans, racks blocking the evaporator
Scenario: The 5-Gallon Stockpot
A cook finishes vegetable beef soup at 4:30 p.m., drops the lid, and wheels the 5-gallon pot into the walk-in “so it can start cooling.” At 6:30 p.m. a probe in the center reads 98°F . Stage 1 is already dead. The walk-in air is 37°F. The method failed, not the box. The PIC pulls the pot, discards if the 2-hour gate is gone and the food sat in the rapid-growth band, or — if a check had caught it before the 2-hour miss — would have transferred to shallow metal pans or an ice-water bath in time. After a failed 70°F check, the 13.1 correction is reheat to 165°F and restart with a real method , or discard. Putting the same stockpot back in the walk-in is not a restart.
Scenario: Room-Temperature “Rest”
A night cook sets leftover macaroni and cheese on the prep table “until it isn’t piping hot,” then refrigerates it at close. The product spent its entire stage-1 window at room temperature. That is not pre-cooling. That is uncontrolled danger-zone time . The correct picture is an ice bath or shallow pans now , then the walk-in or blast chiller to finish.
Exam Traps
Walk-in air temperature is not food temperature. Probe the center.
A tight lid is not protection during cooling. It is insulation. Loose cover, or uncovered if protected.
Plastic deep container in the cooler is the stockpot problem with worse heat transfer.
Ice bath without stirring cools the wall and lies to anyone who only touches the pot.
“It has to stop steaming or we ruin the walk-in” is an equipment-capacity problem. Solve it with ice or a blast chiller, not a counter rest.
Uncovered under raw chicken trades a cooling method for cross-contamination.
13.1 told you the times. This section is the only way those times happen. 13.3 is what you do when that leftover comes back out for the steam table.