Study guide
15.2 HACCP Seven Principles
Certified Food Protection Manager CFPM
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 ANAB-CFP Accreditation, FDA 2-102.12, and Providers 1.3 How to Use This Guide and Study for CFPM
2 Why Food Safety Matters
2.1 Foodborne Illness, Outbreaks, and High-Risk Populations 2.2 TCS Foods and How Contamination Occurs 2.3 Person in Charge and Active Managerial Control
3 Biological Hazards
3.1 Bacteria, FAT TOM, and Sporeformers 3.2 The Big Six Pathogens 3.3 Viruses, Parasites, and Fungi 3.4 Biological Toxins
4 Chemical, Physical, and Intentional Contamination
4.1 Chemical Contaminants and Toxic Metals 4.2 Physical Contaminants 4.3 Food Defense, ALERT, and Outbreak Response
5 Major Food Allergens
5.1 The Big Nine Allergens and Symptoms 5.2 Preventing Cross-Contact 5.3 Allergen Communication, Labeling, and Service
6 The Safe Food Handler
6.1 How Food Handlers Contaminate Food 6.2 Handwashing: When and How 6.3 Gloves, Bare-Hand Contact, and the Hygiene Program
7 Employee Health
7.1 Symptoms and Reporting Responsibilities 7.2 Exclusion vs Restriction 7.3 Return-to-Work Criteria for the Big Six
8 Time and Temperature in the Flow of Food
8.1 Cross-Contamination in the Flow of Food 8.2 Temperature Danger Zone and Time Limits 8.3 Thermometers, Calibration, and Monitoring
9 Purchasing and Receiving
9.1 Approved Suppliers and Purchasing Controls 9.2 Receiving Criteria and Rejection 9.3 Receiving Specific Foods
10 Storage
10.1 FIFO, Labeling, and Date Marking 10.2 Refrigerator Storage Order and Temperatures 10.3 Dry Storage, Frozen Storage, and Chemical Separation
11 Preparation
11.1 Thawing Methods 11.2 Produce, Eggs, Ice, and Other Prep Controls 11.3 Special Processes, Variances, and ROP
12 Cooking
12.1 Minimum Internal Cooking Temperatures 12.2 Consumer Advisories and Undercooked Foods 12.3 Microwave Cooking and Non-Continuous Cooking
13 Cooling and Reheating
13.1 Two-Stage Cooling Requirements 13.2 Cooling Methods and Equipment 13.3 Reheating for Hot Holding
14 Service and Display
14.1 Hot and Cold Holding 14.2 Time as a Public Health Control 14.3 Serving, Utensils, and Self-Service 14.4 Off-Site Service, Catering, Delivery, and Vending 14.5 Refilling Returnables and Reusable Containers
15 Food Safety Management Systems
15.1 Active Managerial Control Programs 15.2 HACCP Seven Principles 15.3 Crisis Management, Recalls, and Imminent Health Hazards
16 Facilities, Equipment, Pests, and Emergencies
16.1 Facility Design, Surfaces, and Equipment 16.2 Water, Plumbing, Backflow, and Waste 16.3 Integrated Pest Management 16.4 Facility Emergencies 16.5 Plan Review, Preoperational Inspection, and the Food Safety Management System
17 Cleaning and Sanitizing
17.1 Cleaning vs Sanitizing 17.2 Chemical Sanitizers: Chlorine, Iodine, Quats 17.3 Manual Warewashing and Dishmachines 17.4 Cleaning Programs, Chemical Storage, and SDS
18 Regulatory Compliance and Staff Training
18.1 FDA Food Code, Agencies, and Inspections 18.2 Record-Keeping and Legal Duties 18.3 Staff Training and Food Safety Culture
15.2 HACCP Seven Principles
Key Takeaways Explain This Topic AI
HACCP’s seven principles in order are: hazard analysis, determine CCPs, establish critical limits, monitoring, corrective actions, verification, and record-keeping.
Cooking poultry to 165°F is a typical restaurant critical control point and critical limit; “cook until done” is not a critical limit.
Prerequisite programs — GMPs, SSOPs, and supplier control — support HACCP but are not a substitute for CCPs on a special process.
A formal HACCP plan is required for Food Code special processes such as most ROP, curing, and smoking for preservation; ordinary cook-serve operations usually run on AMC without a submitted plan.
Last updated: August 2026
Hazard Analysis and Critical Control Point (HACCP) is a science-based system that identifies significant hazards and controls them at steps where control is essential. FDA and USDA use it in manufacturing. The Food Code requires a HACCP plan for certain retail special processes . Most ordinary restaurants do not need a bound seven-principle plan for a grilled chicken sandwich. They still need the thinking: what can go wrong, where you must not fail, what the number is, who checks it, and what you do if you miss.
Memorize the seven principles in order . The exam will scramble them.
- The Seven Principles in Order
- Principle 1 — Conduct a Hazard Analysis
Walk the process step by step and ask which biological, chemical, or physical hazards are reasonably likely. For a grilled chicken sandwich: Salmonella and Campylobacter on raw poultry; norovirus from bare hands on the bun or lettuce; allergen cross-contact if the same grill press just cooked a sesame bun; metal from a worn blade. Significance depends on severity and likelihood. A hazard that cooking will kill is still listed; you will assign the kill step as a critical control point in Principle 2.
Do not invent exotic hazards to look thorough. Do not skip the obvious ones because “we have always done it this way.” The analysis is about this menu and this equipment.
Principle 2 — Determine Critical Control Points
A critical control point (CCP) is a step where control can be applied and is essential to prevent, eliminate, or reduce a hazard to an acceptable level. Not every important control is a CCP. Washing hands is essential, but it is usually a prerequisite sanitation procedure, not a CCP, because it is not a single measurable process step with a critical limit on that sandwich. Cooking the chicken is a CCP : if it fails, surviving pathogens go onto a sandwich that will not be recooked.
A common exam trap is calling every SOP a CCP. Receiving, cold holding, and cleaning matter. They become CCPs only when they are the last essential control for a significant hazard in that process. On a cook-serve sandwich, the cook step is the classic CCP.
Principle 3 — Establish Critical Limits
A critical limit is the measurable boundary that separates safe from unsafe at that CCP. For poultry, FDA Food Code 3-401.11 is 165°F (74°C) for less than 1 second ( instantaneous ). “Cook until done,” “until juices run clear,” or “until it looks white” is not a critical limit. For cook-chill chili, cooling has critical limits: 135°F to 70°F in 2 hours , then 70°F to 41°F in 4 more hours (6 hours total from 135°F). Reheating that chili for hot holding has another limit: 165°F within 2 hours .
If you cannot measure it with a calibrated thermometer, a timer, a pH meter, or another specified device, it is not a critical limit.
Principle 4 — Establish Monitoring Procedures
Who measures what, where, when, and how. For the chicken CCP: the cook checks the thickest part with a calibrated thermometer on every batch (or a statistically valid frequency the plan specifies) and records the temperature, time, and initials. Watching color is not monitoring. Spot-checking “when we remember” is not a procedure.
Monitoring must be frequent enough to catch a failure while the food can still be recooked, cooled, or discarded. A log filled in at close from memory is not monitoring.
Principle 5 — Establish Corrective Actions
If the chicken is 158°F, continue cooking until 165°F; do not plate. If chili is still 80°F at the 2-hour mark, reheat to 165°F and restart the cool, or discard. Write who decides and what happens to the food . “Tell the manager” is incomplete if the sandwich still leaves the window. Corrective action also includes fixing the process so the next batch does not fail — a broken oven, an overloaded pan, an uncalibrated stem.
Principle 6 — Establish Verification Procedures
Verification asks whether the plan is working. Calibrate thermometers. Review logs every shift. The PIC or a designated person checks that cook temperatures were actually taken. Periodically confirm that 165°F is still the right limit for this process. An inspector or third-party auditor reviewing the plan is also verification.
Monitoring is the cook’s check. Verification is the check on the checker. Do not confuse the two on the exam.
Principle 7 — Establish Record-Keeping and Documentation
Keep the hazard analysis, the plan itself, CCP logs, corrective-action reports, calibration records, and verification reviews. If it is not written, the system cannot be verified and cannot be taught to the next PIC. Records also show the regulatory authority that a special process is under control.
Worked Example: Grilled Chicken Sandwich
Process flow: receive raw chicken → cold store → prep (portion) → grill cook → assemble on bun with RTE lettuce and tomato → immediate service.
Principle Restaurant example on this sandwich
1 Hazard analysis Biological: Salmonella / Campylobacter in raw chicken; norovirus on RTE garnish. Chemical: sanitizer residue. Physical: bone or metal.
2 CCPs Cooking the chicken is the CCP for vegetative pathogens. Assembly is hygiene (prerequisite), not a cook CCP.
- 3 Critical limits 165°F instantaneous in the thickest part
- 4 Monitoring Calibrated probe in the thickest piece each batch; record time, temperature, initials
- 5 Corrective action If below 165°F, continue cooking; if contaminated after cook, discard
- 6 Verification PIC reviews the cook log each shift; ice-point calibration; watch the cook take a real reading
- 7 Records Hazard analysis, cook logs, calibration log, corrective-action notes
- Cook-Chill Chili Overlay
A large batch of chili that is cooked, cooled, stored, and reheated for hot holding has more than one CCP . Cooking is one (135°F minimum for plant foods for hot holding; 165°F if the chili contains poultry). Two-stage cooling is another. Reheating for hot holding to 165°F within 2 hours is a third. That is why cook-chill and reduced-oxygen packaging are where formal HACCP appears in the Food Code: the hazards hide in the cool and the package, not only on the grill.
If you vacuum-pack that chili or run a cook-chill bag, you have left “ordinary leftover chili” and entered a special process . Chapter 11 covered variances. This chapter is why the RA also wants the seven principles on paper.
Prerequisite Programs Versus HACCP
HACCP assumes the basics already work. Those basics are prerequisite programs :
Prerequisite Examples Why it is not usually a CCP
GMPs (good manufacturing / retail practices) Personal hygiene, pest control, facility condition, approved water Broad, continuous conditions, not a single process step
SSOPs (sanitation standard operating procedures) Warewashing, slicer cleaning every 4 hours, restroom stocking Essential hygiene; monitored, but not the kill step
Supplier control Approved sources, incoming inspection First risk-factor control; often a prerequisite so HACCP can focus on in-house CCPs
Employee health Exclusion and restriction policy People control across every item, not one product CCP
Allergen program Separation, labeling, communication Critical for guests; usually a prerequisite unless a process claims allergen removal
If prerequisites collapse — sewage on the floor, no hot water, an excluded cook on the line — HACCP logs will not save the food. Fix the prerequisite or stop service. The next section treats those collapses as crises.
When a HACCP Plan Is Required Versus When AMC Is Enough
Food Code 8-201.13 and 3-502.11 / 3-502.12 are the usual retail triggers. A formal HACCP plan is typically required for special processes : smoking for preservation, curing, using additives to render food non-TCS, custom animal processing, sprouting, most reduced-oxygen packaging (vacuum, MAP, cook-chill, sous-vide), molluscan shellfish tanks, and juice treatment that claims a 5-log reduction. Some limited ROP under 3-502.12 can skip a variance but still needs a HACCP plan .
Ordinary cook-serve operations — grill the chicken, hold the soup, cool leftover chili under 3-501.14 — run on AMC : SOPs, monitoring, correction, and records without a seven-principle plan submitted to the RA. If you invent a process that changes pH, oxygen, or shelf life, stop and ask the RA. Do not relabel AMC paperwork as a HACCP plan to justify sous-vide.
The exam trap: HACCP is not “whatever we write after an outbreak” and not “the binder we show instead of taking temperatures.” It is a specified seven-step system. AMC is the everyday retail version. Special processes need both AMC and a formal HACCP plan — and often a variance.