Study guide

9.3 Receiving Specific Foods

Certified Food Protection Manager CFPM

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 ANAB-CFP Accreditation, FDA 2-102.12, and Providers 1.3 How to Use This Guide and Study for CFPM

2 Why Food Safety Matters

2.1 Foodborne Illness, Outbreaks, and High-Risk Populations 2.2 TCS Foods and How Contamination Occurs 2.3 Person in Charge and Active Managerial Control

3 Biological Hazards

3.1 Bacteria, FAT TOM, and Sporeformers 3.2 The Big Six Pathogens 3.3 Viruses, Parasites, and Fungi 3.4 Biological Toxins

4 Chemical, Physical, and Intentional Contamination

4.1 Chemical Contaminants and Toxic Metals 4.2 Physical Contaminants 4.3 Food Defense, ALERT, and Outbreak Response

5 Major Food Allergens

5.1 The Big Nine Allergens and Symptoms 5.2 Preventing Cross-Contact 5.3 Allergen Communication, Labeling, and Service

6 The Safe Food Handler

6.1 How Food Handlers Contaminate Food 6.2 Handwashing: When and How 6.3 Gloves, Bare-Hand Contact, and the Hygiene Program

7 Employee Health

7.1 Symptoms and Reporting Responsibilities 7.2 Exclusion vs Restriction 7.3 Return-to-Work Criteria for the Big Six

8 Time and Temperature in the Flow of Food

8.1 Cross-Contamination in the Flow of Food 8.2 Temperature Danger Zone and Time Limits 8.3 Thermometers, Calibration, and Monitoring

9 Purchasing and Receiving

9.1 Approved Suppliers and Purchasing Controls 9.2 Receiving Criteria and Rejection 9.3 Receiving Specific Foods

10 Storage

10.1 FIFO, Labeling, and Date Marking 10.2 Refrigerator Storage Order and Temperatures 10.3 Dry Storage, Frozen Storage, and Chemical Separation

11 Preparation

11.1 Thawing Methods 11.2 Produce, Eggs, Ice, and Other Prep Controls 11.3 Special Processes, Variances, and ROP

12 Cooking

12.1 Minimum Internal Cooking Temperatures 12.2 Consumer Advisories and Undercooked Foods 12.3 Microwave Cooking and Non-Continuous Cooking

13 Cooling and Reheating

13.1 Two-Stage Cooling Requirements 13.2 Cooling Methods and Equipment 13.3 Reheating for Hot Holding

14 Service and Display

14.1 Hot and Cold Holding 14.2 Time as a Public Health Control 14.3 Serving, Utensils, and Self-Service 14.4 Off-Site Service, Catering, Delivery, and Vending 14.5 Refilling Returnables and Reusable Containers

15 Food Safety Management Systems

15.1 Active Managerial Control Programs 15.2 HACCP Seven Principles 15.3 Crisis Management, Recalls, and Imminent Health Hazards

16 Facilities, Equipment, Pests, and Emergencies

16.1 Facility Design, Surfaces, and Equipment 16.2 Water, Plumbing, Backflow, and Waste 16.3 Integrated Pest Management 16.4 Facility Emergencies 16.5 Plan Review, Preoperational Inspection, and the Food Safety Management System

17 Cleaning and Sanitizing

17.1 Cleaning vs Sanitizing 17.2 Chemical Sanitizers: Chlorine, Iodine, Quats 17.3 Manual Warewashing and Dishmachines 17.4 Cleaning Programs, Chemical Storage, and SDS

18 Regulatory Compliance and Staff Training

18.1 FDA Food Code, Agencies, and Inspections 18.2 Record-Keeping and Legal Duties 18.3 Staff Training and Food Safety Culture

9.3 Receiving Specific Foods

Key Takeaways Explain This Topic AI

Meat and poultry arrive at 41°F or below with a USDA inspection legend and acceptable color and odor; fish arrive at 41°F, bright and firm, with parasite-destruction records if served raw.

Shellstock must be tagged; tags stay on the container until empty and are kept 90 days from the date the last shellstock from that container is sold or served, filed chronologically.

Shucked shellfish arrive at 45°F or below with dealer and shuck or sell-by labels; shell eggs arrive clean, uncracked, at 45°F air, with the USDA grade mark as applicable.

Dairy must be pasteurized; milk may arrive at 45°F then cool to 41°F; pre-cut TCS produce arrives at 41°F; MAP and ROP seals must be intact; dry goods must be dry and pest-free.

Untagged oysters and a can dented on the seam are automatic rejects; lot codes and FIFO make recalls executable.

Last updated: August 2026

General receiving rules do not replace product-specific checks. Meat, fish, shellstock, eggs, dairy, produce, reduced-oxygen packs, and dry goods each have a look, a temperature, and a document. Two exam favorites sit in this section: oysters without tags and a can dented on the seam .

Meat and Poultry

Receive meat and poultry at 41°F or below . Look for the USDA inspection legend (or the equivalent mark from a legally inspected plant). Beef and pork should have the expected color for the cut — not green, not sticky, not sour. Poultry should be flesh-colored, not gray-green, and should not smell like ammonia or rot. Reject sticky surfaces, slime, and damaged vacuum packs that have lost vacuum and soured. Ground product is especially unforgiving; if the package is bloated or the meat is dull gray-brown with an off odor, reject.

The inspection legend is not decoration. It is the mark that the animal food came from an approved, inspected source. A case of chicken with no legend, or a local carcass with only a farmer's business card, fails purchasing and receiving together.

Fish

Receive fish at 41°F or below . Fresh fish should look bright, with firm flesh that springs back, red or pink moist gills, and clear eyes. Reject dull flesh, a fingerprint that stays, brown gills, sunken eyes, and the heavy fishy slime that means decomposition. Ice should be clean and draining. Fish sitting in a pool of meltwater is a quality and contamination problem.

If the fish will be served raw or undercooked , purchasing and receiving both require parasite-destruction documentation — the supplier letter or records that show the fish was frozen under Food Code 3-402.11 times and temperatures, or that the species is exempt. "Sushi-grade" as a verbal promise is not a record. Arriving at 41°F does not replace the letter.

Shellstock and Shucked Shellfish

Shellstock — live oysters, clams, mussels, and whole-uncut scallops — must arrive tagged . Food Code 3-202.18 requires identification. The tag names the harvester or dealer, the harvest date, the harvest location, and the type and quantity. The tag stays attached to the container until the container is empty ( 3-203.11 / 3-203.12 ). Write the date the last shellstock from that container is sold or served on the tag. Keep the tags 90 calendar days from that date, filed in chronological order. That 90-day file is the traceback if someone becomes ill. Do not dump tags in a drawer by supplier name and hope an inspector can reconstruct the order. Do not throw the tag away when the first oyster is shucked.

Do not commingle shellstock from different containers in one display pan if that would mix identity. The tag is useless if nobody can say which oysters came from which harvest.

Scenario: Oysters Without Tags

A case of oysters arrives on clean ice. The shells are closed. The smell is briny and fresh. There are no tags, and the driver says the shop forgot them and can text a photo later. Reject. Untagged shellstock is not an approved, identifiable source. Fresh smell and clean ice do not replace the tag. A later text is not the tag that must arrive with the container. Cooking the oysters later does not erase the identification requirement. Tags are required whether the oysters will be served raw or cooked.

Shucked shellfish arrive at 45°F or below , in labeled containers that show the certified dealer and the shuck date or sell-by / best-if-used-by date. Reject warm shucked product and unlabeled tubs.

Live shellfish should be alive: closed shells, or shells that close when tapped. Broken, gaping, dead product is rejected. Use the CFPM teaching temperatures: about 45°F ambient and 50°F internal .

Eggs and Dairy

Shell eggs arrive clean and uncracked at an air temperature of 45°F or below , with the applicable USDA grade mark . Reject dirty, cracked, or leaking eggs. They are a Salmonella risk and they soil the rest of the case. Food Code 3-202.13 requires clean, sound eggs.

Dairy used in a food establishment is pasteurized ( 3-202.14 ). Most TCS dairy is received at 41°F or below . Milk may arrive at 45°F or below and must then be cooled to 41°F. Reject sour odor, bloated cartons, damaged seals, and anything that arrived above the receiving temperature. Do not accept unlabeled bulk milk from an unknown farm because it is "local."

Produce, MAP/ROP, and Dry Goods

Whole intact produce should be free of significant decay, filth, and pest damage. Pre-cut TCS produce — cut leafy greens, cut tomatoes, cut melons — is received at 41°F or below . A room-temperature case of cut watermelon is a reject, even if the melon was whole when it left the field.

MAP and ROP packs must have intact seals and complete labels: product, processor, keep-refrigerated instructions, dates. A blown vacuum pack, a leaking seal, or an unlabeled bag of vacuum-packed fish is rejected. These packs hide C. botulinum and Listeria risk when the seal or the cold chain has failed.

Dry goods must be dry. Reject moisture stains, damp flour, pest webbing, droppings, and torn bags. What you accept still has to be stored off the floor and away from the wall, but that is the next chapter. At receiving, do not sign for an already infested case.

Recalls, FIFO, and Lot Codes

Receiving is where lot codes become useful. Keep invoices and case codes so a recall can be matched to what you still have. Use first in, first out (FIFO) from the moment product hits the shelf: new product behind older product of the same quality. If a recall notice arrives, the lot code on the case and the invoice are how you pull the right product instead of guessing or discarding an entire cooler.

Scenario: The Seam-Dented Can

A case of beans includes one can with a sharp dent on the side seam and another with only a shallow body dent that does not touch a seam. Reject the seam-dented can. Clostridium botulinum is why CFPM texts treat seam damage, swelling, and leakage as safety rejects, not as a markdown. The shallow body dent can be a quality decision. Do not let that quality call talk you into keeping the seam failure. Never puncture a swollen can in the receiving area.

Product-Specific Receiving Checks

  • Product Temperature / condition Document or mark Reject if
  • Meat and poultry 41°F; expected color and odor USDA inspection legend Warm, sour, slimy, missing legend

Fish 41°F; bright, firm, clean ice Parasite-destruction letter if served raw Warm, slimy, decomposed; no raw-service records

Shellstock About 45°F air / 50°F internal; alive Identification tags; keep 90 days after last sold or served, chronological No tags; dead or broken; too warm

  • Shucked shellfish 45°F Dealer label; shuck or sell-by date Warm; unlabeled
  • Shell eggs 45°F air; clean, uncracked USDA grade mark as applicable Dirty, cracked, warm air

Milk / dairy Milk 45°F then cool to 41°F; other TCS dairy 41°F; pasteurized Plant identity on the package Unpasteurized when not legally allowed; too warm; sour

  • Pre-cut TCS produce 41°F; no decay Invoice / lot Above 41°F; slimy cut greens
  • MAP / ROP Seals intact; cold per label Processor label Blown or leaking seals; unlabeled
  • Dry goods Dry, intact Lot code for recalls Moisture, pests, torn bags
  • Canned food Intact Label readable Seam dent, swell, leak, rust-through

Receiving specific foods is how the approved-source decision becomes a case-by-case reject-or-accept. Storage is the next control, but only after the truck is gone and the tags, temperatures, and lot codes are already right.