Study guide

10.1 FIFO, Labeling, and Date Marking

Certified Food Protection Manager CFPM

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 ANAB-CFP Accreditation, FDA 2-102.12, and Providers 1.3 How to Use This Guide and Study for CFPM

2 Why Food Safety Matters

2.1 Foodborne Illness, Outbreaks, and High-Risk Populations 2.2 TCS Foods and How Contamination Occurs 2.3 Person in Charge and Active Managerial Control

3 Biological Hazards

3.1 Bacteria, FAT TOM, and Sporeformers 3.2 The Big Six Pathogens 3.3 Viruses, Parasites, and Fungi 3.4 Biological Toxins

4 Chemical, Physical, and Intentional Contamination

4.1 Chemical Contaminants and Toxic Metals 4.2 Physical Contaminants 4.3 Food Defense, ALERT, and Outbreak Response

5 Major Food Allergens

5.1 The Big Nine Allergens and Symptoms 5.2 Preventing Cross-Contact 5.3 Allergen Communication, Labeling, and Service

6 The Safe Food Handler

6.1 How Food Handlers Contaminate Food 6.2 Handwashing: When and How 6.3 Gloves, Bare-Hand Contact, and the Hygiene Program

7 Employee Health

7.1 Symptoms and Reporting Responsibilities 7.2 Exclusion vs Restriction 7.3 Return-to-Work Criteria for the Big Six

8 Time and Temperature in the Flow of Food

8.1 Cross-Contamination in the Flow of Food 8.2 Temperature Danger Zone and Time Limits 8.3 Thermometers, Calibration, and Monitoring

9 Purchasing and Receiving

9.1 Approved Suppliers and Purchasing Controls 9.2 Receiving Criteria and Rejection 9.3 Receiving Specific Foods

10 Storage

10.1 FIFO, Labeling, and Date Marking 10.2 Refrigerator Storage Order and Temperatures 10.3 Dry Storage, Frozen Storage, and Chemical Separation

11 Preparation

11.1 Thawing Methods 11.2 Produce, Eggs, Ice, and Other Prep Controls 11.3 Special Processes, Variances, and ROP

12 Cooking

12.1 Minimum Internal Cooking Temperatures 12.2 Consumer Advisories and Undercooked Foods 12.3 Microwave Cooking and Non-Continuous Cooking

13 Cooling and Reheating

13.1 Two-Stage Cooling Requirements 13.2 Cooling Methods and Equipment 13.3 Reheating for Hot Holding

14 Service and Display

14.1 Hot and Cold Holding 14.2 Time as a Public Health Control 14.3 Serving, Utensils, and Self-Service 14.4 Off-Site Service, Catering, Delivery, and Vending 14.5 Refilling Returnables and Reusable Containers

15 Food Safety Management Systems

15.1 Active Managerial Control Programs 15.2 HACCP Seven Principles 15.3 Crisis Management, Recalls, and Imminent Health Hazards

16 Facilities, Equipment, Pests, and Emergencies

16.1 Facility Design, Surfaces, and Equipment 16.2 Water, Plumbing, Backflow, and Waste 16.3 Integrated Pest Management 16.4 Facility Emergencies 16.5 Plan Review, Preoperational Inspection, and the Food Safety Management System

17 Cleaning and Sanitizing

17.1 Cleaning vs Sanitizing 17.2 Chemical Sanitizers: Chlorine, Iodine, Quats 17.3 Manual Warewashing and Dishmachines 17.4 Cleaning Programs, Chemical Storage, and SDS

18 Regulatory Compliance and Staff Training

18.1 FDA Food Code, Agencies, and Inspections 18.2 Record-Keeping and Legal Duties 18.3 Staff Training and Food Safety Culture

10.1 FIFO, Labeling, and Date Marking

Key Takeaways Explain This Topic AI

FIFO means first in, first out: use the oldest dated product first and store new deliveries behind or under older stock.

Working containers of food removed from original packaging must be labeled with the common name of the food.

FDA Food Code 3-501.17 requires date marking of ready-to-eat TCS food prepared on site, and of commercially processed RTE TCS opened on site, when held more than 24 hours.

The 7-day limit at 41°F or below counts the day of preparation or opening as Day 1; discard after Day 7.

Freezing pauses the date-mark clock; remaining days resume when the food is thawed. Uncut produce, shelf-stable food, and some hard cheeses or cultured dairy are typical exceptions — exams still test the 7-day RTE TCS rule.

Last updated: August 2026

FIFO is the storage rule that turns a receiving date into a use order. First in, first out means the oldest dated product is used first. New deliveries go behind or under older stock so a cook who reaches for a pan or a case automatically takes the product that must leave the house first. FIFO is not a slogan on a poster. It is a physical arrangement plus a date check. If the new case of milk is stacked in front of yesterday's case, the operation has already decided to waste the older milk or serve it after its date.

The Person in Charge (PIC) owns FIFO at every storage point: walk-in, reach-in, dry store, and freezer. Staff check use-by, expiration, and date-mark dates when they put product away and again when they pull it. Product past its date is discarded, not "used up on the line because it looks fine." A date is a control. Appearance is not a substitute for it.

Label Working Containers with the Common Name

FDA Food Code 3-302.12 requires working containers holding food or food ingredients that have been removed from their original packages to be identified with the common name of the food . A cambro of white powder on the prep table is not self-explanatory. Flour, sugar, salt, MSG, baking soda, and powdered sanitizer can look similar in a rush. The label is the common name — "all-purpose flour," "granulated sugar," "kosher salt" — not a station nickname and not a blank piece of tape.

Readily recognizable foods in their obvious form (dry pasta in a clear bin, for example) are the usual teaching exception. Do not stretch that exception to powders, liquids, sauces, or prepped TCS food. A working container of chicken salad, house vinaigrette, or portioned chili needs the name of the food. Date marking, covered next, is a separate requirement that often lives on the same label.

Date Marking: FDA Food Code 3-501.17

3-501.17 is the date-marking rule CFPM exams test by name. Ready-to-eat (RTE) time/temperature control for safety (TCS) food that is prepared on site and held refrigerated for more than 24 hours must be date marked. Commercially processed RTE TCS food that is opened on site and held more than 24 hours must also be date marked. The mark tells the operation the date or day by which the food must be consumed on the premises, sold, or discarded.

The holding limit is 7 days at 41°F (5°C) or below . The day of preparation or the day the commercial package is opened counts as Day 1 . Food held past Day 7 is discarded. There is no "it still smells fine" extension and no extra day because the cooler ran at 38°F. Colder storage does not buy an eighth day under the standard Food Code teaching.

If the food is later frozen , the date-mark clock pauses while the product is frozen solid and resumes when the food is thawed . The original Day 1 does not reset. Count the refrigerated days already used, subtract them from 7, and the remainder is what is left after thaw. Write the preparation or opening date, the freeze date if the house procedure uses it, and a new discard date based on the remaining days. Thawing does not start a fresh 7-day clock.

Chicken Salad Made Monday

A cook prepares chicken salad on Monday and refrigerates it at 41°F or below. Monday is Day 1. The salad may be held through Sunday (Day 7) and must be discarded Sunday — at the end of Day 7, not first thing Monday morning as an eighth day. If the same salad is frozen on Wednesday (Day 3 used), four days remain after thaw. If it is thawed the following Thursday, those remaining days resume; they are not seven new days.

Commercially processed roast beef opened Tuesday is the same math: Tuesday is Day 1, discard Monday, unless the manufacturer's use-by date comes first. The earlier of the 7-day mark and the manufacturer's date is the discard date for opened commercial RTE TCS.

What Usually Does Not Need a Date Mark

Exams hammer the 7-day RTE TCS rule. They also expect you to know that exceptions exist . Uncut whole produce is not date-marked as RTE TCS. Shelf-stable packaged food is not date-marked until it becomes a refrigerated TCS leftover after opening or cooking. Food Code exceptions commonly include some hard cheeses (aged cheddar, Parmesan, Romano, and similar low-moisture cheeses) and some cultured dairy products such as yogurt, sour cream, and buttermilk. Individual meal portions prepared and served or displayed for immediate sale are another typical exception. Do not memorize a loophole list to dodge date marking. If the item is RTE TCS prepared or opened on site and held more than 24 hours, date-mark it and discard it on Day 7.

Date-Mark Examples

  • Food or action Date mark? Day 1 Discard at 41°F or below
  • Chicken salad prepared Monday Yes — on-site RTE TCS held more than 24 hours Monday Sunday (Day 7)

Commercial deli turkey opened Tuesday Yes — commercially processed RTE TCS opened on site Tuesday The following Monday, or the manufacturer's use-by date if earlier

Potato salad prepped Wednesday, frozen Friday Yes — clock pauses while frozen Wednesday Four days remain after thaw (Day 3 used; 4 left)

  • Chili cooked Thursday, held cold through the week Yes — on-site RTE TCS Thursday Wednesday (Day 7)
  • Uncut whole apples in the walk-in No — uncut produce — FIFO on quality and receiving dates, not 3-501.17
  • Unopened shelf-stable canned chili No — shelf-stable until opened and becoming TCS — Manufacturer date; FIFO

Aged Parmesan or similar hard cheese Typically no — Food Code exception — Do not treat this as a license to skip marking other cheeses

Opened yogurt or sour cream (cultured dairy) Often excepted under the Food Code — Follow house policy and the manufacturer's date; exams still test the 7-day RTE TCS rule

How the PIC Makes FIFO and Date Marks Stick

Put new product behind or under old product. Face date marks so they can be read without unstacking pans. Use one date format (day of week, calendar date, or a color-dot system that still states the discard day). Train staff that "prep date" and "discard date" are not interchangeable unless the house label defines which one is written. A pan labeled only "chicken salad" with no date is a 3-501.17 failure if it will be held past 24 hours.

Discard on Day 7. Do not combine two leftover pans of chicken salad from different prep days into one pan and keep the later date. The discard date of a combined product is the earliest date of the foods that went into it.

Exam Traps

The trap is treating Day 1 as the day after prep. Monday prep is Day 1; Sunday is Day 7. Another trap is restarting seven days when a commercial package is moved from the walk-in to a working container — opening was Day 1, not the transfer. A third trap is assuming freezing erases the clock. Freezing pauses it. A fourth is skipping labels on working containers because "everyone knows what is in the bin." The exam answer is the common name of the food .