Study guide
8.3 Thermometers, Calibration, and Monitoring
Certified Food Protection Manager CFPM
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 ANAB-CFP Accreditation, FDA 2-102.12, and Providers 1.3 How to Use This Guide and Study for CFPM
2 Why Food Safety Matters
2.1 Foodborne Illness, Outbreaks, and High-Risk Populations 2.2 TCS Foods and How Contamination Occurs 2.3 Person in Charge and Active Managerial Control
3 Biological Hazards
3.1 Bacteria, FAT TOM, and Sporeformers 3.2 The Big Six Pathogens 3.3 Viruses, Parasites, and Fungi 3.4 Biological Toxins
4 Chemical, Physical, and Intentional Contamination
4.1 Chemical Contaminants and Toxic Metals 4.2 Physical Contaminants 4.3 Food Defense, ALERT, and Outbreak Response
5 Major Food Allergens
5.1 The Big Nine Allergens and Symptoms 5.2 Preventing Cross-Contact 5.3 Allergen Communication, Labeling, and Service
6 The Safe Food Handler
6.1 How Food Handlers Contaminate Food 6.2 Handwashing: When and How 6.3 Gloves, Bare-Hand Contact, and the Hygiene Program
7 Employee Health
7.1 Symptoms and Reporting Responsibilities 7.2 Exclusion vs Restriction 7.3 Return-to-Work Criteria for the Big Six
8 Time and Temperature in the Flow of Food
8.1 Cross-Contamination in the Flow of Food 8.2 Temperature Danger Zone and Time Limits 8.3 Thermometers, Calibration, and Monitoring
9 Purchasing and Receiving
9.1 Approved Suppliers and Purchasing Controls 9.2 Receiving Criteria and Rejection 9.3 Receiving Specific Foods
10 Storage
10.1 FIFO, Labeling, and Date Marking 10.2 Refrigerator Storage Order and Temperatures 10.3 Dry Storage, Frozen Storage, and Chemical Separation
11 Preparation
11.1 Thawing Methods 11.2 Produce, Eggs, Ice, and Other Prep Controls 11.3 Special Processes, Variances, and ROP
12 Cooking
12.1 Minimum Internal Cooking Temperatures 12.2 Consumer Advisories and Undercooked Foods 12.3 Microwave Cooking and Non-Continuous Cooking
13 Cooling and Reheating
13.1 Two-Stage Cooling Requirements 13.2 Cooling Methods and Equipment 13.3 Reheating for Hot Holding
14 Service and Display
14.1 Hot and Cold Holding 14.2 Time as a Public Health Control 14.3 Serving, Utensils, and Self-Service 14.4 Off-Site Service, Catering, Delivery, and Vending 14.5 Refilling Returnables and Reusable Containers
15 Food Safety Management Systems
15.1 Active Managerial Control Programs 15.2 HACCP Seven Principles 15.3 Crisis Management, Recalls, and Imminent Health Hazards
16 Facilities, Equipment, Pests, and Emergencies
16.1 Facility Design, Surfaces, and Equipment 16.2 Water, Plumbing, Backflow, and Waste 16.3 Integrated Pest Management 16.4 Facility Emergencies 16.5 Plan Review, Preoperational Inspection, and the Food Safety Management System
17 Cleaning and Sanitizing
17.1 Cleaning vs Sanitizing 17.2 Chemical Sanitizers: Chlorine, Iodine, Quats 17.3 Manual Warewashing and Dishmachines 17.4 Cleaning Programs, Chemical Storage, and SDS
18 Regulatory Compliance and Staff Training
18.1 FDA Food Code, Agencies, and Inspections 18.2 Record-Keeping and Legal Duties 18.3 Staff Training and Food Safety Culture
8.3 Thermometers, Calibration, and Monitoring
Key Takeaways Explain This Topic AI
Bimetallic stemmed thermometers have a calibration nut and a dimple, typically read 0°F–220°F, must be inserted at least to the dimple, and are not for thin foods.
Thermocouples and thermistors use a fine probe for thin foods and faster readings; infrared devices read surface temperature only and cannot be the sole cook-temperature tool.
Ice-point calibration is 32°F in a crushed-ice-and-water slurry; boiling-point calibration is 212°F adjusted for altitude.
Calibrate regularly, after a drop, and after extreme temperatures; clean and sanitize probes between foods; measure the thickest part and avoid bone.
Food Code 4-203.11 typically requires food thermometers accurate to ±2°F; glass thermometers are not for food unless shatterproof or encased; temperature logs are an Active Managerial Control tool.
Last updated: August 2026
A temperature rule is only as good as the tool that measures it. The PIC who can recite 41°F and 135°F but cannot put a legal thermometer in the thickest part of the food is not demonstrating knowledge. FDA Food Code 4-203.11 is the accuracy standard for food temperature measuring devices. Devices scaled only in Fahrenheit must be accurate to ±2°F in the intended range of use. Dual-scale or Celsius-only devices must be accurate to ±1°C . If the stem is off by five degrees, every holding, cooking, and receiving decision that stem supports is off.
Choose the Tool That Matches the Food
Bimetallic stemmed thermometers are the classic dial stem. They have a calibration nut under the dial and a dimple on the stem that marks the end of the sensing area. The usable scale is typically 0°F to 220°F . Insert the stem at least to the dimple . If only the tip is in the food, you are not measuring the sensing area. These stems are too thick and too slow for thin food — hamburger patties, fish fillets, and chicken breasts that are not thick enough to bury the dimple. Use them on deep pots, roasts, and incoming cases, not on a thin patty.
Thermocouples and thermistors use a fine probe and a digital display. They read faster and can reach the center of thin foods . That is the cook-line tool for a burger, a fillet, or a chicken breast. They still need correct placement and a clean probe. Fast is not the same as waving the probe through steam.
Infrared (laser) thermometers read surface temperature only. They are useful for griddle surfaces, the outside of a sealed carton, or equipment. They are never the sole tool for deciding whether a chicken breast, a pot of chili, or a hamburger has reached a safe internal cook temperature. Steam, frost, glass, and shiny metal fool the reading. If the question is "is this food done?" you need a probe in the food .
Maximum-registering and holding thermometers serve equipment, not plated food. A maximum-registering thermometer or a temperature-sensitive label checks a dishwasher's hot final rinse. A hanging or holding thermometer monitors cooler, freezer, or hot-holding equipment air. Equipment air is not food temperature. Use those tools to watch machines; still probe the food.
Glass thermometers are not for food unless they are shatterproof or encased so broken glass cannot become a physical hazard. An unguarded glass candy thermometer in a stockpot is the wrong tool and a glass-in-food risk.
Thermometer type Best use Limitation
Bimetallic stemmed Thick foods, incoming product, pots; 0°F–220°F typical; adjustable nut Insert to the dimple; not for thin food; slower to stabilize
Thermocouple / thermistor Thin foods, cook checks, fast digital readings, fine probe Still needs correct placement; probe must be cleaned and sanitized
Infrared Surfaces of equipment, sealed packages, griddles Surface only; never the sole cook-temperature tool
Maximum-registering / holding Dishmachine final rinse; equipment monitoring Not an internal food-cook thermometer
- Hanging cooler / freezer / oven thermometer Equipment air trends Air temperature is not food temperature
- Calibration: Ice-Point and Boiling-Point
Calibrate regularly , whenever the thermometer is dropped , and after it has seen extreme temperatures (a stem left on a grill, a probe pulled from a freezer into a fryer, a new stem out of the box). A tool you cannot trust is not a control.
Ice-Point Method
Fill a container with crushed ice and add just enough clean water to make a slurry , not a few cubes floating in a cup. Insert the stem or probe into the ice-water mix. Do not let the stem rest on the bottom or side. When the reading stabilizes, a Fahrenheit device should read 32°F . Adjust the bimetallic nut, or use the digital calibrate function, until it does. Ice-point is the everyday method because every kitchen can make a slurry.
Boiling-Point Method
Bring clean water to a rolling boil and insert the stem. At sea level the target is 212°F . Adjust for altitude — water boils below 212°F as elevation rises. If you use boiling-point calibration, you must use the boiling temperature that is correct for that kitchen, not a memorized 212°F in a mountain town. Ice-point does not have that altitude trap, which is why many operations standardize on 32°F.
How to Take the Reading
Clean and sanitize the probe before it touches food, and again between foods — especially between raw and RTE. A dirty stem is a contamination vehicle with a dial on top.
Insert into the thickest part of the food.
Avoid bone , the pan bottom, and fat pockets that do not represent the product.
Wait until the reading stabilizes .
Check more than one piece in a batch when pieces cook or hold unevenly.
Do not leave a bimetallic stem on the grill grate beside a patty and call that an internal temperature. Do not use infrared on the surface of a chicken breast and plate it. Do not dip a probe into chili and then into potato salad without cleaning and sanitizing.
Scenario: The Thin Patty and the Dial Stem
A cook checks burgers with a bimetallic stemmed thermometer. The dimple sits above the patty. The tip is in the meat for two seconds. The dial barely moves. The cook declares the burger done. That measurement never reached the sensing area and never waited for a stable reading. The correct tool is a thin-probe thermocouple or thermistor in the center of the thickest part. The dial stem belongs in the chili insert, not in a quarter-inch patty.
Scenario: Dropped Stem, No Recalibration
A stem hits the tile, goes back into the knife drawer, and is used all weekend to record "41°F" on the cooler log. After a drop, calibrate before the next food check . A log built on an uncalibrated stem is paperwork, not monitoring.
Logs Are Active Managerial Control
Recording temperatures at receiving, cooler storage, cooking, and holding is how the PIC proves the operation is watching the TDZ, not hoping. Logs do not replace a working thermometer, and a working thermometer does not replace a log when you need to show an inspector or a later shift what happened. Write the food temperature, the time, and the corrective action when a reading is out of range. A sheet of identical 41s with no time and no corrective action is not AMC.
Exam Traps
Infrared equals cook temperature is always wrong as a sole method.
Dimple is decorative is wrong; insert at least to the dimple.
Boiling water is always 212°F ignores altitude.
A few ice cubes in a glass is not an ice-point slurry.
±10°F is "close enough" fails 4-203.11; plan on ±2°F for Fahrenheit food thermometers.
Glass in food is allowed only when the device is shatterproof or encased.
The flow of food in 8.1 told you where contamination moves. The danger zone in 8.2 told you which temperatures are legal. This section is the verification step: the right tool, calibrated, cleaned, placed in the thickest part, logged, and accurate to the Code.