Study guide
6.2 Pre-Incident Planning and Site Assessment
Certified Fire Protection Specialist CFPS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction and Exam Overview
1.1 About the CFPS Exam 1.2 How to Navigate the NFPA Fire Protection Handbook
2 Chapter 2: Information and Analysis for Fire Protection
2.1 Chemistry and Physics of Fire 2.2 Fire Dynamics and Heat Release Rates 2.3 Human Behavior in Fire Emergencies
3 Chapter 3: Safety in the Built Environment
3.1 Building Construction and Occupancy Classifications 3.2 Fire Resistance Ratings and Materials 3.3 Occupant Load Calculations 3.4 Means of Egress Components 3.5 Life Safety Code Requirements (NFPA 101)
4 Chapter 4: Confining Fires
4.1 Fire Walls, Barriers, and Partitions 4.2 Compartmentation and Opening Protectives 4.3 Smoke Control and Management Systems
5 Chapter 5: Fire Prevention
5.1 Fire Prevention Programs and Audits 5.2 Hazardous Materials Storage and Handling (NFPA 30) 5.3 Industrial Process Hazards and Ignition Control 5.4 Portable Fire Extinguishers Selection and Placement (NFPA 10)
6 Chapter 6: Facility Fire Hazard Management
6.1 Conducting Facility Inspection Surveys 6.2 Pre-Incident Planning and Site Assessment 6.3 Emergency Management and Risk Assessment (NFPA 1600)
7 Chapter 7: Detection and Alarm
7.1 Fire Alarm System Fundamentals 7.2 Initiating Devices 7.3 Notification Appliances 7.4 Interfaced Systems and Emergency Control Functions 7.5 Alarm System Inspection, Testing, and Maintenance (NFPA 72)
8 Chapter 8: Fire Suppression
8.1: Water Supply and Fire Pumps 8.2: Automatic Sprinkler System Types 8.3: Automatic Sprinkler Design and Calculations (NFPA 13) 8.4: Standpipe and Hose Systems (NFPA 14) 8.5 Foam Fire Suppression Systems (NFPA 11) 8.6 Gas and Special Hazard Chemical Suppression Systems 8.7 Inspection, Testing, and Maintenance of Suppression Systems (NFPA 25)
9 Chapter 9: Organizing for Fire & Rescue Services
9.1 Fire Department Organization and Resource Allocation 9.2 Incident Command System (ICS) Structure and Command 9.3 Emergency Services Training and Operations
6.2 Pre-Incident Planning and Site Assessment
Key Takeaways Explain This Topic AI
Pre-incident planning (NFPA 1620) is focused on responder safety and operational readiness, distinct from regulatory code enforcement inspections.
NFPA 220 defines five structural construction classifications, detailing fire-resistance ratings for core load-bearing elements.
Hazardous materials must be cataloged using NFPA 704 placards, tracking Health, Flammability, Instability, and Special Hazards.
Designated responder access routes require minimum widths of 20 feet and vertical clearances of 13.5 feet to support fire apparatus.
Mapping municipal and private water supplies, including Fire Department Connection (FDC) locations, is vital for rapid suppression deployment.
Last updated: July 2026
- 6.2 Pre-Incident Planning and Site Assessment
- Pre-Incident Planning vs. Inspections
It is critical for CFPS candidates to distinguish between facility fire inspections and pre-incident planning . While a fire inspection is a regulatory enforcement action designed to identify hazards, enforce compliance, and prevent fires from starting, a pre-incident plan is a tactical preparation document. Governed by NFPA 1620 , Standard for Pre-Incident Planning , its primary purpose is to provide emergency responders (such as fire departments and hazardous materials teams) with the essential information required to make safe, efficient, and effective tactical decisions during an active emergency. Pre-incident planning does not focus on code violations; instead, it focuses on operational readiness, responder safety, and asset protection.
Facility Layout Mapping
An accurate facility layout map is the cornerstone of any pre-incident plan. Responders need to quickly understand the physical environment they are entering, especially in low-visibility or high-stress situations. Pre-incident drawings must display:
Building Footprint and Access Points: Clear markers indicating main entryways, emergency exit doors, roof access ladders, fire escapes, and internal stairwells.
Structural Construction Types (NFPA 220): Identifying the building's structural composition allows incident commanders to predict fire spread and estimate the time to structural collapse. NFPA 220 defines five construction classifications:
Construction Type Description Fire Resistance Rating Details
Type I (Fire-Resistive) Noncombustible structural members (concrete, protected steel) High fire-resistance ratings (typically 3 to 4 hours for bearing walls and frames). Minimal collapse risk.
Type II (Noncombustible) Noncombustible structural members, but lower fire resistance Typically 0 to 1 hour ratings. Unprotected steel joists or decks are highly susceptible to early collapse when exposed to heat.
Type III (Ordinary) Noncombustible exterior walls; combustible interior members Exterior walls are masonry or concrete; floors, roofs, and interior partitions are constructed of wood.
Type IV (Heavy Timber) Noncombustible exterior walls; interior heavy timber framing Interior columns, beams, and arches must meet minimum size requirements (e.g., 8-inch solid wood) without concealed spaces.
Type V (Wood Frame) Combustible construction throughout Exterior walls, structural frames, floors, and roofs are composed of wood. Highest fire load and collapse potential.
NFPA 220 Sub-classification Numbers: Candidate plans must record the three-digit sub-classification numbers (e.g., Type I [443] or Type II [111]). In order, these numbers represent the fire resistance rating (in hours) of:
Exterior bearing walls.
Columns, beams, and structural framing.
Floor construction.
Hazardous Materials Inventory
A major hazard for emergency responders is the presence of hazardous materials. A pre-incident plan must contain a comprehensive hazardous materials inventory, including the locations, quantities, and properties of all stored chemicals.
NFPA 704 Marking System
To provide immediate hazard information to responders, facilities must display NFPA 704 placards on the exterior walls, entry doors, and storage areas of hazardous materials. The placard is a color-coded diamond divided into four quadrants:
Health Hazard (Left Quadrant, Blue): Rated from 0 (normal material) to 4 (very short exposure could cause death or major residual injury).
Flammability (Top Quadrant, Red): Rated from 0 (will not burn) to 4 (rapidly or completely vaporizes at atmospheric pressure and normal ambient temperature, flashpoint below 73°F / 22.8°C).
Instability/Reactivity (Right Quadrant, Yellow): Rated from 0 (normally stable) to 4 (readily capable of detonation or explosive decomposition at normal temperatures and pressures).
Special Hazards (Bottom Quadrant, White): Officially recognizes only three symbols:
W with a horizontal slash: Reacts violently or explosively with water (critical for firefighters deciding whether to apply water).
OX: Strong oxidizer (increases the intensity of a fire).
SA: Simple asphyxiant gases (nitrogen, helium, neon, argon, krypton, xenon).
Exam Trap: Symbols such as "ACID," "COR" (corrosive), or "POI" (poisonous) are often used informally but are not officially recognized or permitted under the NFPA 704 standard.
Safety Data Sheets (SDSs) and MAQs
The pre-incident plan must note the location of the master binder containing SDSs (typically in the security office or a Knox Box). Furthermore, the plan must detail whether chemical quantities exceed the Maximum Allowable Quantities (MAQs) per control area, which triggers additional fire barrier and sprinkler requirements under NFPA 1 and NFPA 400.
Responder Access Routes
For fire apparatus to deploy effectively, the site design must accommodate large, heavy vehicles. Pre-incident plans must document access paths and potential bottlenecks:
Designated Fire Lanes: NFPA 1 requires fire department access roads to have an unobstructed width of not less than 20 feet (6.1 m) and an unobstructed vertical clearance of not less than 13.5 feet (4.1 m).
Turning Radii and Load Limits: Access roads must be designed with turning radii that accommodate the local jurisdiction's largest aerial ladder truck. The road surface must support the gross vehicle weight (often exceeding 80,000 lbs) of these apparatus, including outrigger pad pressures during aerial deployment.
Key Boxes (Knox Boxes): To prevent destructive entry during an emergency, key boxes must be installed in approved locations (usually next to the main entrance). The box contains physical keys or electronic key cards for access gates, electrical rooms, elevator controls, and fire alarm panels.
Water Supply Locations
During an incident, water supply is the primary tactical concern. The site assessment must map all available water sources, distinguishing between automatic municipal supplies and manual drafting sites:
Municipal Hydrants: Map the locations and calculate the distance of all hydrants within 1,000 feet of the facility. Note which hydrants are on different water mains to avoid depleting a single main.
Fire Department Connections (FDCs): Identify the locations of all FDCs. These connections allow fire engine pumpers to boost the pressure and volume of water in the building's automatic sprinkler and standpipe systems. FDCs must be clearly labeled (e.g., "Sprinkler," "Standpipe," or "Dry Chemical") and free of obstructions.
Static and Dry Hydrants: For rural or unhydranted areas, identify static water sources such as ponds, lakes, or cisterns. Document the location of dry hydrants (non-pressurized pipe systems permanently installed in static water supplies) and drafting sites where pumpers can draft water.