Study guide
5.5 Waste Profiling, Disposal Vendor Qualification & Final Disposition Documentation
Certified Hazardous Materials Manager CHMM
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Planning and Management of Hazardous Materials
1.1 Hazard Identification & GHS Classification 1.2 Safety Data Sheets (SDS) & Chemical Compatibility 1.3 Life-Cycle Management, Source Reduction & Pollution Prevention 1.4 Chemical Inventory & Regulatory Applicability Framework 1.5 Pollution Prevention Opportunity Assessments (PPOA) & P2 Program Implementation
2 Chapter 2: Shipping and Transporting Hazardous Materials
2.1 DOT HazMat Classification & Table 172.101 2.2 Packaging Standards, Marking, Labeling & UN Specifications 2.3 Shipping Papers, Uniform Hazardous Waste Manifest & e-Manifest 2.4 Placarding Requirements, Exceptions & Modal Transport
3 Chapter 3: Storage of Hazardous Materials
3.1 RCRA Container Storage & Inspection Requirements 3.2 Aboveground (AST) & Underground Storage Tank (UST) Standards 3.3 Secondary Containment Design & Sizing Calculations 3.4 Chemical Segregation, Flammable Liquids & Compressed Gas Storage
4 Chapter 4: Facility Operations & Environmental Permitting
4.1 Process Safety Management (PSM) & Risk Management Plan (RMP) 4.2 Spill Prevention, Control, and Countermeasure (SPCC) & Facility Response Plans 4.3 Clean Air Act: Operating Permits, NESHAP & Emission Controls 4.4 Clean Water Act: NPDES, Industrial Wastewater Pretreatment & SWPPP
5 Chapter 5: Disposition of Hazardous Materials & Waste Management
5.1 RCRA Hazardous Waste Determination: Characteristic & Listed Wastes 5.2 Generator Categories (VSQG, SQG, LQG) & Accumulation Rules 5.3 Satellite Accumulation Areas (SAA) & Universal Waste Management 5.4 Used Oil Management, Land Disposal Restrictions (LDR) & TSDF Operations 5.5 Waste Profiling, Disposal Vendor Qualification & Final Disposition Documentation
6 Chapter 6: Regulatory Recordkeeping & Reporting
6.1 EPCRA Tier II (Section 312) & Toxic Release Inventory (TRI Section 313) 6.2 RCRA Biennial Reporting, Exception Reports & TSCA Reporting 6.3 Regulatory Record Retention Periods & Compliance Documentation
7 Chapter 7: Personnel Training Programs & Competency
7.1 HAZWOPER Training Standards (29 CFR 1910.120) & Emergency Roles 7.2 DOT HazMat (49 CFR 172) & RCRA Generator Training Mandates 7.3 OSHA Hazard Communication Training, Adult Learning & Competency Evaluation
8 Chapter 8: Emergency Response, Incident Command & Recovery
8.1 Emergency Response Planning & Incident Command System (ICS/NIMS) 8.2 Spill Notification: Reportable Quantities (RQ), NRC, SERC & LEPC 8.3 Spill Containment, Mitigation Techniques & Air Monitoring 8.4 Decontamination Procedures, Site Control Zones & Post-Incident Recovery
9 Chapter 9: Environmental Remediation & Site Assessment
9.1 Environmental Site Assessments: ASTM Phase I & Phase II ESA 9.2 CERCLA Superfund Process & RCRA Corrective Action 9.3 In-Situ Remediation Technologies (ISCO, SVE, Bioremediation, PRBs) 9.4 Ex-Situ Remediation Technologies, Risk-Based Corrective Action (RBCA) & CSM
10 Chapter 10: Environmental Management Systems & Compliance Auditing
10.1 ISO 14001:2015 Environmental Management Systems (EMS) & PDCA 10.2 Environmental Auditing Protocols & EPA Audit Policy (Self-Disclosure) 10.3 Root Cause Analysis, CAPA Systems & IHMM Code of Ethics 10.4 Regulatory Currency, Rulemaking Participation, Public Outreach & Environmental Cost Analysis
11 Chapter 11: Environmental Fate, Hydrogeology & Sampling
11.1 Chemical Fate and Transport Mechanisms (Partitioning, Darcy's Law, Advection) 11.2 Soil, Groundwater & Air Sampling Protocols and Chain of Custody 11.3 Data Quality Objectives (DQOs), Analytical Methods & PARCC Parameters 11.4 Human Health & Ecological Risk Assessment (HQ, Hazard Index, Cancer Risk)
12 Chapter 12: Occupational Health, Industrial Hygiene & Safety
12.1 Industrial Hygiene Principles (AREC) & Occupational Exposure Limits (PEL, TLV, REL, IDLH) 12.2 Chemical Toxicology, Routes of Entry & Dose-Response (LD50, LC50) 12.3 Hierarchy of Controls & Engineering Solutions 12.4 Personal Protective Equipment (Levels A-D) & Respiratory Protection Programs (APF, MUC) 12.5 Industrial Hygiene Monitoring Equipment (PID, FID, Multi-Gas Meters, Noise & Heat Stress) 12.6 Job Hazard Analysis (JHA), the HAZWOPER Site Safety and Health Plan (HASP) & Required Written Programs
5.5 Waste Profiling, Disposal Vendor Qualification & Final Disposition Documentation
Key Takeaways Explain This Topic AI
A waste profile is the generator-certified characterization document that a TSDF relies on for pre-acceptance; its chemical composition block must total 100 percent including non-hazardous constituents and water.
A contract may allocate costs between parties but cannot defeat CERCLA liability to the government; risk-based vendor qualification and downstream controls are prudent due diligence, not a universal RCRA mandate to conduct an on-site audit.
Under 40 CFR § 264.147, a TSDF must carry liability coverage of at least $1 million per occurrence and $2 million annual aggregate for sudden accidental occurrences, and $3 million per occurrence and $6 million annual aggregate for non-sudden occurrences at land-based units.
The receiving facility's signed manifest confirms receipt, not treatment or destruction. An LQG inquires after 35 days and files an exception report after 45 days if no signed return is received; obtain a disposition/destruction certificate when a contract, PCB rule, permit, state rule, or internal standard requires it.
TSDFs must verify each incoming load against the profile using a written waste analysis plan and fingerprint analysis under 40 CFR § 264.13, which is why a profile that understates a constituent produces a rejected load and a return shipment at the generator’s cost.
Last updated: August 2026
Waste Profiling, Disposal Vendor Qualification & Final Disposition Documentation
Sections 5.1 through 5.4 answered what the waste is and how it must be treated . This section answers the three questions the CHMM blueprint asks about the commercial and documentary side of disposition: what a waste profile contains, how a generator qualifies or disqualifies a disposal facility , and how final disposition is confirmed and documented .
The stakes are legal, not clerical. Under CERCLA § 107(a)(3) a generator who arranges for disposal is an arranger and carries strict, joint and several, and retroactive liability for the site that receives the waste. That liability cannot be signed away . An indemnity clause in a disposal contract may give the generator a claim against the vendor, but it does not stop EPA from naming the generator as a Potentially Responsible Party decades later. Vendor selection is therefore a liability decision that the CHMM owns.
1. The Waste Profile (Waste Profile Sheet / Waste Characterization Form)
A waste profile is the generator's certified description of a waste stream, submitted to the receiving facility for pre-acceptance before a single drum ships. It is signed by an authorized representative and is typically recertified annually or whenever the generating process changes.
- Profile block Content the CHMM must supply
- Generator identification Legal name, site address, EPA ID number, state ID, technical and emergency contacts
Waste stream name and origin The specific process that generates it — "spent immersion-tank cleaning solution from aluminum pretreatment," never "shop waste"
Physical description Physical state, number and nature of layers, color, odor, viscosity, free liquids, specific gravity, BTU value, particle size
Chemical composition Every constituent with a concentration range , summing to 100 percent — including water and non-hazardous constituents
Regulatory characterization RCRA waste codes (D/F/K/P/U), state waste codes, benzene NESHAP status, TSCA/PCB status, radioactivity, DEA-controlled substances
Analytical basis Laboratory data (TCLP, ignitability, pH, reactivity) or generator process knowledge — the profile must state which, and generator knowledge must be defensible
LDR information Applicable treatment standard, the subcategory, and underlying hazardous constituents (UHCs) for characteristic wastes under 40 CFR § 268.9
DOT shipping description UN/NA number, proper shipping name, hazard class and division, packing group, subsidiary hazards, ERG guide number
Container and logistics data Container type and size, volume per shipment, shipment frequency, one-time vs. recurring
Special handling flags Air-reactive, water-reactive, shock-sensitive, cyanide- or sulfide-bearing, dioxin, exotic, odor, temperature limits
Generator certification Signature, title, and date attesting that the profile is accurate and complete
Follow the receiving facility's profile instructions. Many commercial TSDF profiles require the listed constituents and matrix to total 100 percent. A profile that lists only the hazardous constituents (for example, "40% methanol, 15% toluene") and leaves 45 percent unstated is the most common reason a profile is returned. The TSDF must know the whole matrix to design treatment and to avoid an incompatible-mixing incident in its tank farm.
Why an inaccurate profile is expensive
The receiving facility operates under a waste analysis plan required by 40 CFR § 264.13 . Every incoming load is verified against its profile by fingerprint analysis — a rapid battery of tests (pH, flash point, water reactivity, layering, halogen screen, specific gravity) run at the gate. A material discrepancy can lead to rejection or a corrected/reconciled manifest under §§ 264.71 and 264.72. The facility must follow the manifest discrepancy or rejected-load procedures that match what occurred; a fingerprint mismatch does not automatically establish one universal enforcement outcome.
2. Qualifying and Disqualifying a Disposal Facility
The generator's evaluation is normally organized as a desktop review followed by an on-site audit, then repeated on a fixed cycle (commonly every three years , and immediately upon a significant enforcement event).
Desktop review — the disqualifying findings
Permit status. Does the facility hold a current RCRA Part B permit (or interim status) that expressly authorizes the specific waste codes and the specific management method you intend to use? A permit that covers storage but not treatment does not authorize treatment.
Compliance history. Query EPA ECHO and RCRAInfo , plus state enforcement dockets, for notices of violation, consent orders, penalties, and Significant Non-Complier status over at least the last three to five years. Look for repeat violations of the same requirement — a pattern is far more predictive than a single citation.
Financial assurance. Verify closure, post-closure, and liability coverage under 40 CFR Part 264 Subparts G and H . Under § 264.147 , minimum liability coverage is $1 million per occurrence with a $2 million annual aggregate for sudden accidental occurrences , and for surface impoundments, landfills, land treatment units, and waste piles an additional $3 million per occurrence with a $6 million annual aggregate for non-sudden accidental occurrences , in each case exclusive of legal defense costs.
Insurance certificates naming the generator, and the identity of the corporate parent that stands behind the site.
Subcontracting and brokering. Will the facility transfer your waste to a downstream site you have never evaluated? Contractually require written pre-approval of any downstream TSDF , because your arranger liability follows the waste to its final resting place.
On-site audit — what to look at
Container storage condition and aisle space, tank integrity and secondary containment, the laboratory and its fingerprinting throughput, the waste analysis plan in practice, groundwater monitoring well network and recent data, the contingency plan and emergency equipment, personnel training records, closure plan and cost estimate currency, security, and open enforcement correspondence. Many generators pool this effort through cooperative audit programs rather than each sending a separate team.
Documentation that closes the file
Retain the audit report, the permit copy, the financial assurance certificates, the compliance-history search results, and the approval memo. If EPA later names your company as a PRP, this file is the evidence that the selection was reasonable and diligent.
3. Confirming and Documenting Final Disposition
Milestone Requirement Citation
Waste leaves the site Generator signs the Uniform Hazardous Waste Manifest (EPA Form 8700-22); retains a signed copy 40 CFR § 262.23
Designated facility receives waste TSDF signs and returns Copy 4 to the generator 40 CFR § 264.71
35 days with no signed return LQG must contact the transporter and/or the designated facility to determine the status 40 CFR § 262.42(a)(1)
45 days with no signed return LQG must submit an Exception Report to the EPA Regional Administrator with a legible copy of the manifest and a cover letter describing the efforts made 40 CFR § 262.42(a)(2)
SQG timeline SQG must submit a copy of the manifest with indication that a return was not received at 60 days 40 CFR § 262.42(b)
Long-term proof Certificate of Disposal / Certificate of Destruction issued by the TSDF identifying the manifest number, waste stream, method, and date of final disposition Contractual; not a RCRA form
Record retention Manifests and exception reports retained 3 years ; LDR notifications and waste determinations retained 3 years from the date the waste was last sent 40 CFR §§ 262.40, 268.7(a)(8)
The certificate of disposal is the item candidates most often overlook. The manifest system proves the waste arrived ; it does not prove it was destroyed . A drum can sit in a permitted storage building for months under a valid manifest. When a contract, a state P2 statute, or a corporate standard requires proof of final disposition — and especially for PCB waste, where 40 CFR § 761.218 requires a Certificate of Disposal within 30 days of disposal — the certificate is the controlling document.
Exam trap. The 35-day and 45-day figures are LQG deadlines under § 262.42(a), and 60 days is the SQG figure under § 262.42(b). Do not confuse either with the 15-day window a TSDF has under § 264.72 to resolve a significant manifest discrepancy before reporting it to EPA, or with the 3-year manifest retention period.