Study guide
2.1 Gas Laws and Vapor Calculations
CIH Certified Industrial Hygienist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The CIH Exam and How to Use This Guide
1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan
2 Chapter 2: Basic Science & Calculations
2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals
3 Chapter 3: Air Sampling & Instrumentation
3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration
4 Chapter 4: Analytical Chemistry & Lab Methods
4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency
5 Chapter 5: Biostatistics & Epidemiology
5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection
6 Chapter 6: Toxicology & Biological Monitoring
6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring
7 Chapter 7: Biohazards & Indoor Environmental Quality
7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs
8 Chapter 8: Community Exposure & Environmental Health
8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know
9 Chapter 9: Health Risk Analysis & Hazard Communication
9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties
10 Chapter 10: Industrial Ventilation Principles & LEV Design
10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections
11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics
11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing
12 Chapter 12: Noise Measurement & Hearing Conservation
12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration
13 Chapter 13: Thermal Stress Assessment & Control
13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill
14 Chapter 14: Ionizing Radiation Protection
14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys
15 Chapter 15: Non-Ionizing Radiation & Laser Safety
15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance
16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment
16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control
17 Chapter 17: Ergonomics & Workstation Design
17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics
18 Chapter 18: Work Environments & Industrial Processes
18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation
19 Chapter 19: IH Program Management & Professional Ethics
19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement
2.1 Gas Laws and Vapor Calculations
Key Takeaways Explain This Topic AI
The Ideal Gas Law (PV = nRT) describes gaseous behavior at ambient industrial conditions using universal gas constant R = 0.08206 L·atm/(mol·K) or 62.36 L·mmHg/(mol·K).
Dalton's Law of Partial Pressures establishes that total pressure equals the sum of partial pressures, directly linking mole fraction in vapor to volumetric concentration in ppm (ppm = mole fraction × 1,000,000).
Raoult's Law calculates equilibrium vapor pressure above ideal multicomponent liquid mixtures (Pi = xi · Pi°), where volatile components with high pure vapor pressures dominate the headspace vapor phase.
Vapor density relative to air is calculated as MW / 29; vapors with VD > 1 are denser than dry air and will accumulate in low-lying sumps and unventilated trenches until turbulent convective mixing occurs.
Last updated: August 2026
Gas Laws and Vapor Calculations
Industrial hygiene practice requires a rigorous quantitative understanding of how gases and vapors behave under varying environmental conditions. Whether assessing the evaporation rate of a spilled solvent, calculating the concentration of a contaminant in a confined space, or calibrating air sampling pumps across elevation changes, industrial hygienists rely on classical thermodynamic principles and gas laws. This section reviews the fundamental gas laws, vapor pressure thermodynamics, mixture equilibrium via Raoult's Law, and vapor density physics.
1. Fundamental Gas Laws & Empirical Relationships
At the temperatures and pressures typically encountered in workplace environments (e.g., 0°C to 50°C and 0.7 to 1.1 atm), most toxic gases and solvent vapors exhibit near-ideal behavior. The empirical gas laws describe how state variables— pressure (P) , volume (V) , temperature (T) , and molar quantity (n) —interact.
Boyle's Law: Isothermal Volume-Pressure Relationship
Boyle's Law states that for a fixed mass of gas at constant temperature, volume is inversely proportional to pressure: P 1 V 1 = P 2 V 2 ( at constant T , n ) P_1 V_1 = P_2 V_2 \quad (\text{at constant } T, n) P 1 V 1 = P 2 V 2 ( at constant T , n )
Industrial Hygiene Application: When calibrating primary standard airflow calibrators (such as soap-bubble flowmeters or dry piston calibrators) or evaluating compressed breathing air cylinders, pressure changes directly modulate the physical gas volume.
Charles's Law: Isobaric Volume-Temperature Relationship
Charles's Law dictates that at constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature: V 1 T 1 = V 2 T 2 ( at constant P , n ) \frac{V_1}{T_1} = \frac{V_2}{T_2} \quad (\text{at constant } P, n) T 1 V 1 = T 2 V 2 ( at constant P , n )
Critical Requirement: All thermodynamic calculations must use absolute temperature scales— Kelvin (K) for metric systems (K = °C + 273.15) and Rankine (°R) for imperial systems (°R = °F + 459.67). Using Celsius or Fahrenheit directly in proportional equations yields invalid results.
Gay-Lussac's Law: Isochoric Pressure-Temperature Relationship
Gay-Lussac's Law establishes that for a gas in a rigid container (constant volume), pressure is directly proportional to absolute temperature: P 1 T 1 = P 2 T 2 ( at constant V , n ) \frac{P_1}{T_1} = \frac{P_2}{T_2} \quad (\text{at constant } V, n) T 1 P 1 = T 2 P 2 ( at constant V , n )
Industrial Hygiene Application: Assessing pressure accumulation in closed solvent storage drums or gas cylinders exposed to direct solar radiation or elevated process heat.
The Combined Gas Law
Combining Boyle's, Charles's, and Gay-Lussac's relationships yields the Combined Gas Law, which handles simultaneous shifts in pressure, volume, and temperature: P 1 V 1 T 1 = P 2 V 2 T 2 \frac{P_1 V_1}{T_1} = \frac{P_2 V_2}{T_2} T 1 P 1 V 1 = T 2 P 2 V 2
2. The Ideal Gas Law & Universal Constants
The Ideal Gas Law unites the empirical relationships into a single equation of state relating pressure, volume, temperature, and moles: P V = n R T P V = n R T P V = n RT
Because the number of moles n equals mass (m) divided by molecular weight (MW), the equation can also be expressed to solve directly for mass or gas density (ρ): P V = ( m MW ) R T ⟹ ρ = m V = P ⋅ MW R T P V = \left(\frac{m}{\text{MW}}\right) R T \implies \rho = \frac{m}{V} = \frac{P \cdot \text{MW}}{R T} P V = ( MW m ) RT ⟹ ρ = V m = RT P ⋅ MW
Universal Gas Constant (R) Values
Selecting the correct numerical value for the ideal gas constant R depends entirely on the units of measurement used for pressure, volume, and mass:
- Value of R Units of Pressure (P) Units of Volume (V) Units of Quantity (n) Units of Temperature (T)
- 0.082057 atm L mol K
- 62.364 mmHg or Torr L mol K
- 8.3145 kPa L (or m³·Pa) mol K
- 8.3145 N/m² (Pa) m³ mol K
- 0.7302 atm ft³ lb-mol °R
- 10.73 psia (lb/in²) ft³ lb-mol °R
- 3. Dalton's Law of Partial Pressures & Vapor Mixtures
In a mixture of non-reacting gases or vapors, Dalton's Law of Partial Pressures states that the total pressure exerted by the gas mixture (Ptotal) is equal to the sum of the partial pressures (Pi) that each individual gas would exert if it alone occupied the entire volume at the same temperature: P total = P 1 + P 2 + P 3 + ⋯ + P k = ∑ i = 1 k P i P_{\text{total}} = P_1 + P_2 + P_3 + \dots + P_k = \sum_{i=1}^{k} P_i P total = P 1 + P 2 + P 3 + ⋯ + P k = i = 1 ∑ k P i
Partial Pressure, Mole Fraction, and Parts Per Million (ppm)
For an ideal gas mixture, the ratio of the partial pressure of component i to the total pressure is exactly equal to its mole fraction (yi) and its volumetric fraction (Vi / Vtotal): y i = n i n total = P i P total = V i V total y_i = \frac{n_i}{n_{\text{total}}} = \frac{P_i}{P_{\text{total}}} = \frac{V_i}{V_{\text{total}}} y i = n total n i = P total P i = V total V i
In industrial hygiene, airborne gas and vapor concentrations are frequently expressed in parts per million by volume (extppm) . By definition: ppm i = y i × 10 6 = ( P i P total ) × 10 6 \text{ppm}_i = y_i \times 10^6 = \left(\frac{P_i}{P_{\text{total}}}\right) \times 10^6 ppm i = y i × 1 0 6 = ( P total P i ) × 1 0 6
Maximum Theoretical Saturated Vapor Concentration (Csat)
When a volatile liquid reaches thermodynamic equilibrium with ambient air inside an enclosed or unventilated space, its partial pressure equals its saturated vapor pressure (Pi°) at that temperature. The maximum theoretical concentration in parts per million (Csat) that can exist in the air is: C sat = ( P i ∘ P atm ) × 10 6 ppm C_{\text{sat}} = \left(\frac{P_i^\circ}{P_{\text{atm}}}\right) \times 10^6 \text{ ppm} C sat = ( P atm P i ∘ ) × 1 0 6 ppm
Where Pi° is the vapor pressure of the pure liquid and Patm is ambient barometric pressure (both in identical units, typically mmHg). If Csat exceeds the Immediately Dangerous to Life or Health (IDLH) value or Lower Explosive Limit (LEL), catastrophic hazard potential exists in stagnant environments.
- 4. Vapor Pressure, Antoine Equation, and Raoult's Law
- Vapor Pressure (P°)
Vapor pressure is the pressure exerted by a vapor in thermodynamic equilibrium with its condensed phase (liquid or solid) at a given temperature in a closed system. Liquids with high vapor pressures (e.g., diethyl ether, acetone, hexane) evaporate rapidly and are classified as highly volatile.
The Antoine Equation
Vapor pressure increases exponentially with temperature according to the Clausius-Clapeyron relationship. The Antoine Equation is an empirical three-parameter equation widely used to calculate pure substance vapor pressures over specific temperature ranges: log 10 ( P ∘ ) = A − B T + C \log_{10}(P^\circ) = A - \frac{B}{T + C} lo g 10 ( P ∘ ) = A − T + C B
Where P° is vapor pressure (usually in mmHg overland), T is temperature (usually in °C), and A, B, C are substance-specific empirical constants.
Raoult's Law for Ideal Liquid Mixtures
When a liquid contains two or more miscible chemical components, the vapor pressure exerted by each individual component (Pi) above the liquid solution is suppressed by the presence of the other components. According to Raoult's Law , for an ideal solution: P i = x i ⋅ P i ∘ P_i = x_i \cdot P_i^\circ P i = x i ⋅ P i ∘
Where:
- Pi = partial vapor pressure of component i above the liquid solution
- xi = mole fraction of component i in the liquid phase (moles of i / total liquid moles)
- Pi° = saturated vapor pressure of pure component i at the solution temperature
The total vapor pressure above the multicomponent liquid mixture (Ptotal) is: P total = ∑ i = 1 k x i ⋅ P i ∘ = x 1 P 1 ∘ + x 2 P 2 ∘ + ⋯ + x k P k ∘ P_{\text{total}} = \sum_{i=1}^{k} x_i \cdot P_i^\circ = x_1 P_1^\circ + x_2 P_2^\circ + \dots + x_k P_k^\circ P total = i = 1 ∑ k x i ⋅ P i ∘ = x 1 P 1 ∘ + x 2 P 2 ∘ + ⋯ + x k P k ∘
Equilibrium Headspace Vapor Composition
The mole fraction of component i in the resulting equilibrium vapor phase (yi) is given by Dalton's law applied to the mixture: y i = P i P total = x i P i ∘ ∑ x k P k ∘ y_i = \frac{P_i}{P_{\text{total}}} = \frac{x_i P_i^\circ}{\sum x_k P_k^\circ} y i = P total P i = ∑ x k P k ∘ x i P i ∘
Key Principle: The vapor phase above a liquid mixture is always enriched in the more volatile component (the component with the higher pure vapor pressure Pi°). Even if a liquid is 80% low-volatility solvent and 20% high-volatility solvent by moles, the headspace vapor may consist predominantly of the high-volatility component.
5. Vapor Density and Gravitational Behavior
Vapor density (relative vapor density, VD) is the ratio of the mass of a given volume of pure gas or vapor to the mass of an equal volume of dry air at identical temperature and pressure.
Calculating Relative Vapor Density
Dry ambient air has an average apparent molecular weight of approximately 28.97 g/mol (commonly rounded to 29 g/mol) based on its composition (~78.08% N2, 20.95% O2, 0.93% Ar, 0.04% CO2). Vapor Density (VD) = MW gas MW air = MW 28.97 ≈ MW 29 \text{Vapor Density (VD)} = \frac{\text{MW}_{\text{gas}}}{\text{MW}_{\text{air}}} = \frac{\text{MW}}{28.97} \approx \frac{\text{MW}}{29} Vapor Density (VD) = MW air MW gas = 28.97 MW ≈ 29 MW
Chemical Compound Formula Molecular Weight (g/mol) Vapor Pressure at 20°C (mmHg) Relative Vapor Density (Air = 1.0) Physical Behavior Tendency
- Hydrogen H2 2.02 Gas 0.07 Rises rapidly; collects at ceiling/roof peaks
- Methane CH4 16.04 Gas 0.55 Lighter than air; rises and disperses upward
- Carbon Monoxide CO 28.01 Gas 0.97 Nearly identical to air; mixes uniformly
- Air (Reference) — 28.97 — 1.00 Neutral buoyancy reference
- Hydrogen Sulfide H2S 34.08 Gas 1.18 Moderately heavier than air; settles in pits
- Acetone C3H6O 58.08 185 2.00 Heavy vapor; sinks along workbenches
- n-Hexane C6H14 86.18 121 2.97 Heavy vapor; accumulates in low areas
- Toluene C7H8 92.14 22 3.18 Heavy vapor; travels along floors
- Trichloroethylene (TCE) C2HCl3 131.39 58 4.53 Very heavy vapor; severe sump accumulation risk
- Practical Industrial Hygiene Dynamics: Stratification vs Mixing
While pure vapors with VD > 1 tend to settle initially into low-lying areas, floor trenches, sumps, and confined space bottoms, diffusive and convective forces rapidly govern workplace behavior once airflow is present .
In completely stagnant air, dense vapors can form persistent stratified layers.
However, air currents as low as 50 fpm (0.25 m/s) induce turbulent mixing. Once mixed into ambient air at parts-per-million levels, the mixture's effective molecular weight is virtually identical to air (29 g/mol), and the chemical will not spontaneously unmix or settle out by gravity .
- 6. Worked Step-by-Step Calculation Examples
- Worked Example 1.1: Evaporated Vapor Volume from Liquid Solvent Spill
Problem: An open beaker spills 250 mL of pure liquid methylene chloride (dichloromethane, CH2Cl2, MW = 84.93 g/mol, liquid density ρliquid = 1.325 g/mL) in an unventilated chemical storage closet. The room temperature is 24°C (297.15 K) and atmospheric pressure is 750 mmHg. Assuming complete evaporation, what pure vapor volume (in liters) is generated at these room conditions?
Solution Steps:
Calculate total mass (m) of spilled solvent: m = Volume × ρ liquid = 250 mL × 1.325 g/mL = 331.25 g m = \text{Volume} \times \rho_{\text{liquid}} = 250\text{ mL} \times 1.325\text{ g/mL} = 331.25\text{ g} m = Volume × ρ liquid = 250 mL × 1.325 g/mL = 331.25 g
Calculate the number of moles (n) of methylene chloride: n = m MW = 331.25 g 84.93 g/mol = 3.9003 mol n = \frac{m}{\text{MW}} = \frac{331.25\text{ g}}{84.93\text{ g/mol}} = 3.9003\text{ mol} n = MW m = 84.93 g/mol 331.25 g = 3.9003 mol
Apply the Ideal Gas Law (PV = nRT) using R = 62.364 L·mmHg/(mol·K): V = n R T P = ( 3.9003 mol ) × ( 62.364 L ⋅ mmHg / ( mol ⋅ K ) ) × ( 297.15 K ) 750 mmHg V = \frac{n R T}{P} = \frac{(3.9003\text{ mol}) \times (62.364\text{ L}\cdot\text{mmHg}/(\text{mol}\cdot\text{K})) \times (297.15\text{ K})}{750\text{ mmHg}} V = P n RT = 750 mmHg ( 3.9003 mol ) × ( 62.364 L ⋅ mmHg / ( mol ⋅ K )) × ( 297.15 K ) V = 72277.6 750 = 96.37 Liters V = \frac{72277.6}{750} = 96.37\text{ Liters} V = 750 72277.6 = 96.37 Liters
Result: The liquid spill generates 96.4 L of pure methylene chloride vapor at ambient room conditions.
Worked Example 1.2: Headspace Vapor Composition from Solvent Mixture (Raoult's Law)
Problem: A degreasing bath contains an equimolar liquid mixture consisting of 2.0 moles of n-hexane (Component 1: MW = 86.18, pure vapor pressure P1° = 121 mmHg at 20°C) and 2.0 moles of toluene (Component 2: MW = 92.14, pure vapor pressure P2° = 22 mmHg at 20°C). The room pressure is 760 mmHg.
Calculate the partial vapor pressure of each component above the solution.
Calculate the total vapor pressure of the solution.
Determine the equilibrium mole fraction and concentration in ppm of n-hexane in the saturated headspace vapor.
Solution Steps:
Calculate liquid mole fractions (x1, x2): n total = 2.0 + 2.0 = 4.0 moles n_{\text{total}} = 2.0 + 2.0 = 4.0\text{ moles} n total = 2.0 + 2.0 = 4.0 moles x hexane = 2.0 4.0 = 0.50 , x toluene = 2.0 4.0 = 0.50 x_{\text{hexane}} = \frac{2.0}{4.0} = 0.50, \quad x_{\text{toluene}} = \frac{2.0}{4.0} = 0.50 x hexane = 4.0 2.0 = 0.50 , x toluene = 4.0 2.0 = 0.50
Calculate partial vapor pressures using Raoult's Law (Pi = xi Pi°): P hexane = 0.50 × 121 mmHg = 60.5 mmHg P_{\text{hexane}} = 0.50 \times 121\text{ mmHg} = 60.5\text{ mmHg} P hexane = 0.50 × 121 mmHg = 60.5 mmHg P toluene = 0.50 × 22 mmHg = 11.0 mmHg P_{\text{toluene}} = 0.50 \times 22\text{ mmHg} = 11.0\text{ mmHg} P toluene = 0.50 × 22 mmHg = 11.0 mmHg
Calculate total solution vapor pressure (Ptotal): P total = P hexane + P toluene = 60.5 mmHg + 11.0 mmHg = 71.5 mmHg P_{\text{total}} = P_{\text{hexane}} + P_{\text{toluene}} = 60.5\text{ mmHg} + 11.0\text{ mmHg} = 71.5\text{ mmHg} P total = P hexane + P toluene = 60.5 mmHg + 11.0 mmHg = 71.5 mmHg
Calculate vapor phase mole fraction (yhexane) and concentration in ppm: y hexane = P hexane P total = 60.5 mmHg 71.5 mmHg = 0.8462 ( 84.62 % of vapor ) y_{\text{hexane}} = \frac{P_{\text{hexane}}}{P_{\text{total}}} = \frac{60.5\text{ mmHg}}{71.5\text{ mmHg}} = 0.8462 \quad (84.62\%\text{ of vapor}) y hexane = P total P hexane = 71.5 mmHg 60.5 mmHg = 0.8462 ( 84.62% of vapor ) C sat, hexane = ( P hexane P atm ) × 10 6 = ( 60.5 mmHg 760 mmHg ) × 10 6 = 79 , 605 ppm C_{\text{sat, hexane}} = \left(\frac{P_{\text{hexane}}}{P_{\text{atm}}}\right) \times 10^6 = \left(\frac{60.5\text{ mmHg}}{760\text{ mmHg}}\right) \times 10^6 = 79,605\text{ ppm} C sat, hexane = ( P atm P hexane ) × 1 0 6 = ( 760 mmHg 60.5 mmHg ) × 1 0 6 = 79 , 605 ppm
Result: Although the liquid mixture is 50% hexane by moles, hexane constitutes 84.6% of the headspace vapor phase due to its higher relative volatility, demonstrating why volatile components represent disproportionately high airborne inhalation risks.