Study guide

1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

Key Takeaways Explain This Topic AI

The current CIH Exam Blueprint is based on the 2021 Job Analysis and has been effective since April 1, 2022.

Three performance domains carry fixed weights: Exposure Assessment Principles and Practice 50%, Control Selection/Recommendation/Implementation and Validation 35%, and Risk Management 15%.

The blueprint defines nine tasks across the three domains, while a separate BGC document defines the subject areas (rubrics) that categorise individual exam items.

Because scoring is compensatory across subject areas but items are drawn from all of them, breadth of coverage outperforms depth in a few favourite topics.

Roughly half the exam rests on quantitative competence, so calculation fluency — not formula memorisation — is the highest-yield preparation activity.

Last updated: August 2026

The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

Two different official documents describe CIH exam content, and confusing them is a common source of bad study plans. This section separates them, states the weights that actually govern item allocation, and turns them into a preparation sequence.

1. The Blueprint: Three Domains, Nine Tasks

The CIH Exam Blueprint is based on the 2021 Job Analysis and has been effective since April 1, 2022 . It defines three performance domains — major areas of responsibility — and nine tasks performed within them, together with the knowledge and skills required.

  • Domain Title Weight Tasks
  • I Exposure Assessment Principles and Practice 50% 4
  • II Control Selection, Recommendation/Implementation, and Validation 35% 3
  • III Risk Management 15% 2

Domain I (50%) runs from anticipation and recognition of hazards, through assessing the exposure–health-effect relationship, designing and implementing a qualitative or quantitative assessment strategy, to forming conclusions and communicating them.

Domain II (35%) runs from selecting a control using the hierarchy of controls, through developing and implementing it, to validating that it works.

Domain III (15%) covers developing and implementing programmes and systems that address health risk, and evaluating and maintaining their effectiveness — including the BGC Code of Ethics , which is named explicitly in the blueprint.

2. The Subject Areas (Rubrics): How Items Are Categorised

Separately from the domains, BGC maintains Subject Area Definitions — historically called rubrics — that categorise individual examination questions. BGC states that you should expect questions in all subject areas : DOMAIN I (50%) DOMAIN II (35%) DOMAIN III (15%)

  • ----------------------------- --------------------------- -------------------------
  • Basic Science Engineering Controls / Work Environments and
  • Air Sampling & Instrumentation Ventilation Industrial Processes
  • Analytical Chemistry Noise IH / OEHS Program
  • Toxicology Thermal Stressors Management
  • Biostatistics & Epidemiology Radiation - Ionizing
  • Biohazards Radiation - Nonionizing
  • Community Exposure Non-Engineering Controls
  • Health Risk Analysis & Ergonomics
  • Hazard Communication

The public BGC list collapses the two radiation entries into one, giving the familiar count of 16 subject areas ; the Subject Area Definitions document separates them.

The relationship to remember: domains carry the weights, subject areas carry the content . An item about calculating a hood exhaust volume is a Domain II item categorised under Engineering Controls/Ventilation. An item about the same hood's capture efficiency measurement is a Domain II validation item. An item about deciding whether a worker is overexposed is Domain I.

3. How This Guide Maps to the Blueprint

Guide chapters Subject areas covered Domain

Basic science, air sampling, analytical chemistry Basic Science, Air Sampling & Instrumentation, Analytical Chemistry I

Biostatistics, toxicology, biohazards and IEQ Biostatistics & Epidemiology, Toxicology, Biohazards I

Community and environmental health, risk analysis and hazard communication Community Exposure, Health Risk Analysis & Hazard Communication I

Ventilation (LEV, general, air cleaning), noise, thermal stress, radiation, PPE, ergonomics Engineering Controls/Ventilation, Noise, Thermal Stressors, both Radiation areas, Non-Engineering Controls, Ergonomics II

Industrial processes, programme management and ethics Work Environments and Industrial Processes, IH Program Management III

4. A Calculation-First Study Plan

Scoring is compensatory across subject areas — there is no per-area minimum — but items are drawn from all areas. The optimal strategy follows directly:

Do not spend 200 hours perfecting ventilation because you enjoy it. Do eliminate every area where you would score at chance.

A defensible allocation for a 150–250 hour plan, proportional to the domain weights:

  • Phase Focus Share of study time
  • 1 Exposure assessment: sampling, analytical methods, statistics, toxicology, OELs ~50%
  • 2 Controls: ventilation design, noise, thermal, radiation, PPE, ergonomics ~35%
  • 3 Risk management: processes, programme management, ethics, regulatory framework ~15%

Layered across all three phases:

Build calculation fluency, not formula recall. The BGC Equation Sheets are provided during the exam. What is not provided is the judgement to recognise that a problem is a purge problem, a mixture problem, or a shift-adjustment problem. Practise classifying problems before solving them.

Drill unit conversion until it is automatic. ppm to mg/m³, cfm to m³/s, inches of water to pascals, rem to sievert, and non-standard temperature and pressure corrections underlie items across every domain. A unit error turns a correct method into a wrong answer.

Learn paired standards, not single numbers. OSHA versus ACGIH for noise; PEL versus TLV versus REL; NIOSH versus OSHA for respirator selection. Items are frequently written on precisely the point where the two frameworks disagree.

Time yourself at 100 seconds per item. That is the true pace: 90 items per 150-minute section.

Practise on an on-screen calculator. Logarithms, exponentials, and roots on an unfamiliar interface cost real time.