Study guide

1.2 Eligibility, Application Windows, Fees, and Certification Maintenance

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

1.2 Eligibility, Application Windows, Fees, and Certification Maintenance

Key Takeaways Explain This Topic AI

BGC accepts any bachelor’s degree built on at least 60 semester hours of science, mathematics, engineering, or science-based technology, with at least 15 hours at the upper level.

Candidates must document 180 academic contact hours or 240 continuing education contact hours of IH coursework, at least half covering toxicology, fundamentals, measurements, and controls, plus 2 contact hours of ethics.

Four years (48 months) of professional-level IH practice is required; ABET-accredited IH graduates receive one year (master’s) or six months (bachelor’s) of credit.

Fees are a $160 application or reapplication fee, a $370 examination scheduling fee, and a $180 annual maintenance fee once certified.

Certification runs on a five-year cycle requiring 40 Certification Maintenance points including 2 hours of ethics coursework.

Last updated: August 2026

Eligibility, Application Windows, Fees, and Certification Maintenance

The CIH is an eligibility-gated credential: BGC approves you to sit before you may schedule, and the approval is based on documentary evidence of education, coursework, and practice. This section states the current requirements precisely, because the most common reason a well-prepared candidate does not test in a given window is a paperwork deadline, not a knowledge gap.

1. The Degree Requirement — Broader Than Most Candidates Think

BGC does not require an industrial hygiene degree, and does not require any specific named major.

The Board will consider, and may accept, any bachelor's degree from an acceptable college or university, provided the degree is based on appropriate coursework and represents at least 60 semester hours of creditable subjects , with at least 15 of those hours at the upper level (junior, senior, or graduate).

"Creditable subjects" means undergraduate or graduate coursework in science, mathematics, engineering, and science-based technology — the STEM requirement. A biology, chemistry, physics, or engineering degree normally satisfies it automatically; a business or liberal arts degree normally does not, but can be supplemented.

Degrees earned outside the United States or Canada require a credential evaluation from a member of NACES or AICE . Official transcripts must be sent to BGC directly by the institution — transcripts forwarded by the applicant are not accepted.

2. Industrial Hygiene and Ethics Coursework

Separate from the degree, BGC requires documented IH-specific coursework:

  • Requirement Academic route Continuing education route
  • Total IH coursework 180 academic contact hours 240 continuing education contact hours
  • Of which, in the broad IH subjects at least 90 hours at least 120 hours
  • Ethics coursework 2 contact hours , separate 2 contact hours , separate

The "broad subjects" that at least half the hours must cover are toxicology, fundamentals of industrial hygiene, measurements, and controls . Conversion rules: one semester hour equals 15 academic contact hours or 20 continuing education contact hours; one quarter hour equals 10 academic or 13 continuing education hours; one CEU equals 10 continuing education contact hours.

Two traps:

Attending a conference is not a course. Conference-affiliated professional development courses count; walking the technical sessions does not.

Ethics hours do not count toward the IH hours. The 2 ethics contact hours are an additional, separate requirement.

3. Professional Experience

You must document at least 4 years (48 months) of professional-level industrial hygiene practice . Professional-level means exercising independent judgement in anticipation, recognition, evaluation, and control — not performing sampling to someone else's protocol.

Credit for accredited IH degrees:

  • Degree from an ABET-accredited IH program Credit granted Months you must still document
  • Master's 1 year 36
  • Bachelor's 6 months 42

Note carefully what BGC does not require: there is no requirement that your practice be supervised by a CIH . What is required is that at least one of your minimum two Professional Reference Questionnaires (PRQs) comes from a CIH familiar with your practice. The submitted PRQs must together cover the full number of months you claim.

  • 4. Deadlines, Windows, and Fees APPLICATION DEADLINE TESTING WINDOW
  • -------------------- ----------------------
  • February 1 -----------------> Spring: April 1 - May 31
  • August 1 -----------------> Fall: October 1 - November 30

All materials — transcripts, PRQs, coursework documentation, ethics documentation — must be postmarked by the deadline to be considered for that window. You may schedule only one examination per window.

  • Fee Amount What it buys
  • Application / reapplication $160 Document review and file maintenance (non-refundable)
  • Examination (scheduling) $370 One seat at a Pearson VUE test center
  • Annual maintenance $180 Yearly fee to hold the credential once awarded

A first attempt therefore costs $530 . An approved application packet stays active for four consecutive windows (two years) ; after that you must submit an updated PRQ and pay the $160 reapplication fee to keep it alive.

Retakes: if you do not pass, you must wait for the next window and pay the $370 examination fee again. Cancelling with the test center at least 48 hours before the appointment carries the fee forward; cancelling later forfeits it.

5. Certification Maintenance

The CIH is maintained on a five-year Certification Maintenance (CM) cycle :

Earn and document 40 CM points per cycle, including at least 2 hours of ethics coursework.

Points come from categories including professional practice, continuing education, technical committee service, publications, teaching and presenting, and mentoring — the subject matter must align with the CIH exam subject areas or the exam blueprint.

Pay the annual fee on time. Late payment makes you "not in good standing," and unpaid fees for two successive years result in decertification in the third year .

Recertification by examination is an alternative to CM points; eligible practitioners may test within the 18 months (three windows) immediately preceding their expiration date.

Exam relevance: the BGC ethics canons, the CM obligations, and the consequences of not being in good standing are themselves testable content under Domain III, Risk Management. Knowing your own credential's rules is part of professional practice.