Study guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

1.1 CIH Exam Format, Scoring, and Test-Day Logistics

Key Takeaways Explain This Topic AI

The CIH exam contains 180 multiple-choice questions — 150 scored and 30 unscored pilot items that are indistinguishable from scored ones.

Testing is delivered in two 2.5-hour sections with one optional 30-minute break, for 5 hours of total testing time.

BGC reports results as pass or fail only; the cut score is criterion-referenced and statistically equated, and no passing percentage is published.

No minimum score is required in any individual subject area — the pass decision is based on the total number of scored questions answered correctly.

Personal calculators are prohibited; an on-screen scientific calculator and the BGC Equation Sheets are embedded in the exam software, and candidates receive a whiteboard instead of paper.

Last updated: August 2026

CIH Exam Format, Scoring, and Test-Day Logistics

Everything else in this guide teaches industrial hygiene. This section teaches the exam itself — the structure, the scoring model, and the test-day mechanics that decide whether your technical knowledge actually reaches the answer sheet. Candidates lose points to the format far more often than they admit: mis-budgeting time across two fixed sections, hunting for pilot questions, or discovering at the workstation that their own calculator is not allowed.

1. Item Count and Delivery Structure

The CIH examination contains 180 multiple-choice questions . Of these:

Item type Count Counts toward your score?

  • Scored operational items 150 Yes
  • Unscored pilot (pretest) items 30 No

Pilot items are being evaluated for use on future forms. They are written to the same specifications, formatted identically, and distributed throughout the exam. You cannot identify them , and any time spent trying to is time taken from items that count. Treat every question as scored, because five out of six are.

The exam is delivered in two sections of 2.5 hours each , with one optional 30-minute break between them: +---------------------------------------------------------------+

  • | Tutorial | SECTION 1 | Break | SECTION 2 | Survey |
  • | (short) | 2.5 hours | 30 min | 2.5 hours | |
  • | | | optional | | |
  • +---------------------------------------------------------------+
  • ^
  • If you take the break, you get
  • exactly 30 minutes. Section 2 starts
  • at the 30-minute mark whether you are

back or not.

Within a section you may move freely — review, flag, and change answers. You cannot return to Section 1 once Section 2 begins. Budget accordingly: with 90 items per section over 150 minutes, the average pace is 100 seconds per item . Calculation-heavy ventilation and dosimetry items will run long, so bank time on the recall items.

A short tutorial precedes the exam and a short survey follows it; neither consumes testing time. The exam software also lets you submit comments on specific items. BGC staff review those comments, but will not discuss them with you.

2. How the Exam Is Scored

This is the single most misunderstood aspect of the CIH, and prep vendors routinely publish numbers BGC has never endorsed.

Your score is the total number of scored questions answered correctly. There is no penalty for a wrong answer, so never leave an item blank — a guess has positive expected value.

The passing score is criterion-referenced. A panel of Certified Industrial Hygienists established it using standard-setting procedures under the guidance of BGC's psychometric partner, Certiverse. It reflects the performance expected of a minimally competent CIH, not a percentile of the candidate pool.

Each administration is statistically equated. Because forms vary slightly in difficulty, the raw number correct required to pass is adjusted so that candidates across years are held to the same competency standard.

BGC does not publish a passing percentage. Any source telling you "you need 70%" is inventing a number. Results are reported as pass or fail .

There is no per-subject-area minimum. You do not have to pass Toxicology and Ventilation separately; a weak area can be offset by strength elsewhere. That said, BGC states you should expect questions in all subject areas, so a large blind spot is dangerous in aggregate even though it is not individually disqualifying.

Exam strategy consequence: because scoring is compensatory across subject areas and there is no guessing penalty, breadth beats depth-in-a-few-areas. A candidate who is competent in sixteen areas will outscore one who is expert in eight and blank in eight.

3. Calculators, Equation Sheets, and Scratch Work

BGC changed the calculation environment, and the changes are frequently missed by candidates studying from older materials.

Item Current rule

Personal calculator Not permitted. Leave it in the locker.

  • Calculator On-screen scientific calculator, available throughout the exam via a calculator icon
  • Equation reference BGC Equation Sheets , accessible from a button on the exam screen

Scratch paper Not provided. Each candidate receives a whiteboard and dry marker ; on-screen scratch paper is also embedded next to the equation sheet and calculator icons

Ventilation equation basis Since the Spring 2025 administration, all ventilation equations follow ACGIH Industrial Ventilation: A Manual of Recommended Practice for Design , 31st Edition (2023)

Two practical implications:

Practise with an on-screen calculator, not your field calculator. Pearson VUE publishes a practice calculator at pearsonvue.com/athena . Keystroke fluency with logarithms, exponentials, and square roots on an unfamiliar interface is worth real points on decibel and dilution items.

The equation sheet gives you formulas without telling you when to use them. It will list the dilution ventilation equation; it will not tell you that the problem you are reading is a purge problem rather than a steady-state problem. Memorising formulas is less valuable than recognising which physical situation you are in — which is how this guide is organised.

4. Identification and Test Center Rules

Bring one original, unexpired, government-issued photo ID with your name, photograph, and signature. The first and last name must match your registration exactly. A mismatch means you do not test and you forfeit the fee.

All personal items other than the ID go in a locker outside the testing area.

You may take unscheduled breaks, but no additional time is granted for time lost.

Remote proctoring is not available — BGC suspended remote proctored testing for its exams. All CIH testing is at Pearson VUE test centers.

5. Putting the Format to Work

  • Format fact What you should do differently
  • 30 unscored items you cannot identify Never skip a "weird" question assuming it is a pilot
  • No guessing penalty Answer all 180; flag and return rather than leaving blanks
  • Section 1 locks when Section 2 starts Do your final review of Section 1 before the break
  • No per-area minimum Do not over-invest in one favourite subject area
  • On-screen calculator only Drill log and exponent keystrokes on a practice calculator
  • Equation sheet provided Study recognition of problem types, not formula memorisation