Study guide

8.1 Clean Air Act Framework, NAAQS, and New Source Review

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

8.1 Clean Air Act Framework, NAAQS, and New Source Review

Key Takeaways Explain This Topic AI

The Clean Air Act sets primary NAAQS to protect public health with an adequate margin of safety, including sensitive populations, and secondary NAAQS to protect public welfare.

Six criteria pollutants carry NAAQS: particulate matter (PM10 and PM2.5), ozone, carbon monoxide, sulphur dioxide, nitrogen dioxide, and lead.

Areas are designated attainment or nonattainment for each pollutant separately, and states must submit a State Implementation Plan demonstrating how nonattainment areas will reach the standard.

New Source Review splits into Prevention of Significant Deterioration in attainment areas (Best Available Control Technology) and Nonattainment NSR (Lowest Achievable Emission Rate plus offsets).

Last updated: August 2026

Clean Air Act Framework, NAAQS, and New Source Review

Industrial hygienists and environmental health professionals evaluate air quality across both occupational boundaries and ambient community interfaces. The Clean Air Act (CAA) establishes the statutory framework governing ambient air quality, industrial stationary source emissions, and toxic atmospheric pollutants across the United States. Mastery of ambient standards, regional attainment classifications, permitting mechanisms, continuous emissions monitoring, and source-testing fluid dynamics is essential for the Certified Industrial Hygienist (CIH).

1. Clean Air Act (CAA) Statutory Framework

The statutory basis for ambient air quality regulation derives from the Clean Air Act of 1970 and its major Amendments of 1977 and 1990 (42 U.S.C. § 7401 et seq.). The CAA establishes a dual regulatory structure: ┌──────────────────────────────────────┐

  • │ Clean Air Act (CAA) Structure │
  • └──────────────────┬───────────────────┘
  • │
  • ┌─────────────────────────────────┴─────────────────────────────────┐
  • ▼ ▼
  • ┌──────────────────────────────┐ ┌──────────────────────────────┐
  • │ Criteria Air Pollutants │ │ Hazardous Air Pollutants │
  • │ (Section 108/109) │ │ (Section 112) │
  • ├──────────────────────────────┤ ├──────────────────────────────┤
  • │ • 6 Ubiquitous Pollutants │ │ • 187 Listed Specific Toxics │
  • │ • NAAQS (Primary/Secondary) │ │ • Technology-Based (MACT) │
  • │ • Attainment vs Nonattainment│ │ • NESHAP Program │
  • │ • State Implementation Plans │ │ • Residual Risk & Tech Review│
  • └──────────────────────────────┘ └──────────────────────────────┘
  • Structure of the Clean Air Act Titles

Title I — Air Pollution Prevention and Control: National Ambient Air Quality Standards (NAAQS), State Implementation Plans (SIPs), New Source Performance Standards (NSPS), and New Source Review (NSR).

Title II — Mobile Sources: Emission standards for motor vehicles, aircraft, and non-road engines; reformulated gasoline mandates.

Title III — General Provisions: Administrative procedures, citizen suits, emergency powers, and definitions.

Title IV — Acid Deposition Control: Cap-and-trade allowance system for sulfur dioxide (SO2) and nitrogen oxides (NOx) from utility power plants.

Title V — Operating Permits: Comprehensive federal operating permit program (Title V Operating Permits) for major stationary sources, consolidating all applicable CAA requirements into a single legally enforceable document.

Title VI — Stratospheric Ozone Protection: Phaseout of ozone-depleting substances (ODSs), including chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and halons under the Montreal Protocol.

2. National Ambient Air Quality Standards (NAAQS)

Under CAA Sections 108 and 109, the EPA Administrator must identify ubiquitous atmospheric pollutants that "may reasonably be anticipated to endanger public health or welfare" and establish National Ambient Air Quality Standards (NAAQS) for these six Criteria Air Pollutants .

Primary vs. Secondary Standards

Primary Standards: Set concentration limits designed to protect public health with an adequate margin of safety . These standards must specifically safeguard sensitive subpopulations, including children, the elderly, asthmatics, and individuals with pre-existing chronic obstructive pulmonary disease (COPD) or cardiovascular illness, without regard to economic or technological feasibility.

Secondary Standards: Set concentration limits designed to protect public welfare from known or anticipated adverse effects , including decreased visibility (haze), damage to wildlife, agricultural crops, vegetation, and economic damage to buildings and infrastructure.

The Six Criteria Air Pollutants and Current NAAQS

Pollutant Primary / Secondary Indicator & Averaging Period Standard Level Form / Statistical Basis of Standard

Carbon Monoxide (CO) Primary 1-Hour 35 ppm (40 mg/m³) Not to be exceeded more than once per calendar year.

Primary 8-Hour 9 ppm (10 mg/m³) Not to be exceeded more than once per calendar year.

Lead (Pb) Primary & Secondary Rolling 3-Month Average 0.15 µg/m³ (in total suspended particles, TSP) Not to be exceeded over a 3-month rolling average.

Nitrogen Dioxide (NO2) Primary 1-Hour 100 ppb 98th percentile of 1-hour daily maximum concentrations, averaged over 3 years.

Primary & Secondary Annual Arithmetic Mean 53 ppb Annual arithmetic average.

Ozone (O3) Primary & Secondary 8-Hour 0.070 ppm (70 ppb) Annual 4th-highest daily maximum 8-hour concentration, averaged over 3 years.

Particulate Matter (PM(2.5)) Primary Annual Arithmetic Mean 9.0 µg/m³ (updated 2024; historically 12.0 µg/m³) Annual arithmetic mean, averaged over 3 years.

Secondary Annual Arithmetic Mean 15.0 µg/m³ Annual arithmetic mean, averaged over 3 years.

Primary & Secondary 24-Hour 35 µg/m³ 98th percentile of 24-hour concentrations, averaged over 3 years.

Particulate Matter (PM10) Primary & Secondary 24-Hour 150 µg/m³ Not to be exceeded more than once per year on average over 3 years.

Sulfur Dioxide (SO2) Primary 1-Hour 75 ppb 99th percentile of 1-hour daily maximum concentrations, averaged over 3 years.

Secondary 3-Hour 0.5 ppm (500 ppb) Not to be exceeded more than once per calendar year.

Exam Fact: Ground-level ozone (O3) is a secondary pollutant formed by complex photochemical reactions involving Nitrogen Oxides (NOx), Volatile Organic Compounds (VOCs), and atmospheric sunlight (hν). It is not emitted directly from smokestacks.

  • 3. Regional Attainment, SIPs, and New Source Review (NSR)
  • Attainment vs. Nonattainment Classifications

Geographic areas (counties or Air Quality Control Regions) are designated based on ambient monitoring network data:

Attainment Area: Ambient monitoring demonstrates that pollutant concentrations consistently remain at or below the NAAQS.

Nonattainment Area: Ambient monitoring demonstrates that pollutant concentrations exceed the NAAQS for one or more criteria pollutants (classified into severity tiers: Marginal, Moderate, Serious, Severe, Extreme for ozone).

Unclassifiable / Maintenance Area: Areas with insufficient data, or nonattainment areas that have successfully implemented control strategies and have been redesignated to attainment under an EPA-approved maintenance plan.

State Implementation Plans (SIPs)

Under CAA Section 110, each state must draft and enforce a State Implementation Plan (SIP) containing emission inventories, source-specific limits, monitoring networks, and enforcement rules to demonstrate how all air basins within the state will achieve and maintain compliance with NAAQS.

New Source Review (NSR) Permitting Hierarchy

New Source Review is a pre-construction permitting program applied to new major stationary sources or major modifications of existing sources: ┌───────────────────────────────┐

  • │ New Source Review (NSR) │
  • └───────────────┬───────────────┘
  • │
  • ┌────────────────────────────┴────────────────────────────┐
  • ▼ ▼
  • ┌───────────────────────────────┐ ┌───────────────────────────────┐
  • │ Attainment Area (PSD) │ │ Nonattainment Area (NNSR) │
  • ├───────────────────────────────┤ ├───────────────────────────────┤
  • │ • Prevention of Significant │ │ • Nonattainment NSR │
  • │ Deterioration │ │ • Control: LAER (Lowest │
  • │ • Control: BACT (Best │ │ Achievable Emission Rate) │
  • │ Available Control Tech) │ │ • Offsets: Greater than 1:1 │
  • │ • Considers cost & energy │ │ • No cost consideration │
  • └───────────────────────────────┘ └───────────────────────────────┘

Prevention of Significant Deterioration (PSD) Permitting (Attainment Areas):

Mandates that clean air quality cannot be degraded up to the NAAQS ceiling (regulated via statutory "air quality increments").

Requires application of Best Available Control Technology (BACT) : an emission limit based on the maximum degree of reduction determined on a case-by-case basis, taking into account energy, environmental, and economic costs.

Requires ambient air quality dispersion modeling to prove the facility will not exceed PSD increments or NAAQS.

Nonattainment New Source Review (NNSR) Permitting (Nonattainment Areas):

Requires application of Lowest Achievable Emission Rate (LAER) : the most stringent emission limitation contained in any SIP for that category or achieved in practice by any source, without consideration of economic cost or energy penalty .

Requires Emission Offsets : the applicant must obtain legally binding, permanent emission reductions from existing regional sources at a ratio greater than 1:1 (e.g., 1.15:1 to 1.5:1 depending on nonattainment severity) to ensure a net air quality benefit.