Study guide
8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology
CIH Certified Industrial Hygienist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The CIH Exam and How to Use This Guide
1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan
2 Chapter 2: Basic Science & Calculations
2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals
3 Chapter 3: Air Sampling & Instrumentation
3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration
4 Chapter 4: Analytical Chemistry & Lab Methods
4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency
5 Chapter 5: Biostatistics & Epidemiology
5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection
6 Chapter 6: Toxicology & Biological Monitoring
6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring
7 Chapter 7: Biohazards & Indoor Environmental Quality
7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs
8 Chapter 8: Community Exposure & Environmental Health
8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know
9 Chapter 9: Health Risk Analysis & Hazard Communication
9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties
10 Chapter 10: Industrial Ventilation Principles & LEV Design
10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections
11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics
11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing
12 Chapter 12: Noise Measurement & Hearing Conservation
12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration
13 Chapter 13: Thermal Stress Assessment & Control
13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill
14 Chapter 14: Ionizing Radiation Protection
14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys
15 Chapter 15: Non-Ionizing Radiation & Laser Safety
15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance
16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment
16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control
17 Chapter 17: Ergonomics & Workstation Design
17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics
18 Chapter 18: Work Environments & Industrial Processes
18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation
19 Chapter 19: IH Program Management & Professional Ethics
19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement
8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology
Key Takeaways Explain This Topic AI
The dry adiabatic lapse rate is 9.8 °C per kilometre (about 5.4 °F per 1,000 ft); comparing the environmental lapse rate to it determines whether the atmosphere is unstable, neutral, or stable.
A superadiabatic environmental lapse rate produces unstable, buoyant conditions and looping plumes; an inversion (temperature increasing with height) produces stable conditions and fanning plumes.
Pasquill-Gifford classes A through F run from extremely unstable to moderately stable and are assigned from wind speed, insolation, and cloud cover.
Fumigation — an elevated inversion breaking up from below — produces the highest short-term ground-level concentrations, while lofting is the most protective morphology.
Last updated: August 2026
Atmospheric Stability, Lapse Rates, and Plume Morphology
When toxic contaminants, particulate matter, or combustion byproducts are discharged from industrial smokestacks or accidental fugitive releases, their transport and dilution in the atmosphere are governed by fluid mechanics, thermodynamic gradients, and chemical partitioning. Industrial hygienists must evaluate downwind community exposure risks using mathematical atmospheric dispersion models and predict the environmental persistence and bioaccumulation of contaminants across soil, water, and biological matrices.
1. Atmospheric Boundary Layer Physics, Stability Regimes, and Lapse Rates
Atmospheric stability refers to the tendency of the atmosphere to resist or enhance vertical air motion. When an unsaturated parcel of air rises vertically in the atmosphere, it expands due to decreasing hydrostatic pressure and cools adiabatically.
The Dry Adiabatic Lapse Rate (DALR, Γd)
The thermodynamic cooling rate of dry (unsaturated) air rising without heat exchange with the surrounding environment is constant: Γ d = − ( d T d z ) adiabatic = g c p = 9.8 ∘ C/km ≈ 1.0 ∘ C / 100 m ( 5.4 ∘ F / 1 , 000 ft ) \Gamma_d = -\left(\frac{dT}{dz}\right)_{\text{adiabatic}} = \frac{g}{c_p} = 9.8^\circ\text{C/km} \approx 1.0^\circ\text{C}/100\text{ m} \quad (5.4^\circ\text{F}/1,000\text{ ft}) Γ d = − ( d z d T ) adiabatic = c p g = 9. 8 ∘ C/km ≈ 1. 0 ∘ C /100 m ( 5. 4 ∘ F /1 , 000 ft )
Where g = 9.81 m/s² is gravitational acceleration and cp = 1005 J/(kg·K) is the specific heat capacity of dry air at constant pressure.
The Environmental Lapse Rate (ELR)
The Environmental Lapse Rate (ELR) is the actual, measured ambient vertical temperature gradient existing in the atmosphere at a specific time and location: ELR = − d T d z \text{ELR} = -\frac{dT}{dz} ELR = − d z d T
- Atmospheric Stability Regimes
- Comparing the ELR against the DALR defines the vertical stability regime of the atmosphere: Altitude (z)
- ▲
- │ Inversion (dT/dz > 0, Highly Stable)
- │ ╱
- │ ╱ Isothermal (dT/dz = 0, Stable)
- │ ╱ Subadiabatic (ELR < DALR, Stable)
- ││ Adiabatic / Neutral (ELR = DALR, Neutral)
- │ ╲ Superadiabatic (ELR > DALR, Highly Unstable)
- │ ╲
- └────────────────────────────────────────► Temperature (T)
Stability Regime Temperature Gradient Criteria Physical Behavior of Displaced Air Parcel Atmospheric Turbulence & Mixing
Superadiabatic (Unstable) ELR > DALR (-dT/dz > 9.8°C/km) A displaced air parcel becomes warmer and less dense than surrounding ambient air, accelerating upward (buoyant instability). Intense convective thermal turbulence; large vertical eddies; rapid plume dispersion.
Adiabatic / Neutral ELR = DALR (-dT/dz ≈ 9.8°C/km) A displaced air parcel has the identical temperature and density as surrounding ambient air at all heights; experiences zero net buoyancy force. Purely mechanical turbulence generated by surface wind shear; no thermal buoyancy acceleration.
Subadiabatic (Stable) 0 < ELR < DALR (0 < -dT/dz < 9.8°C/km) A displaced parcel cools faster than ambient air, becomes denser, and is forced back down to its initial equilibrium height. Suppressed vertical motion; weak mechanical mixing; minimal vertical dispersion.
Isothermal (Stable) ELR = 0 (dT/dz = 0) Ambient temperature remains constant with increasing altitude. Parcel is strongly restored to original position. High vertical stability; near-zero vertical turbulence.
Inversion (Extremely Stable) ELR < 0 (dT/dz > 0) Ambient temperature increases with altitude . Warm air overlays colder, denser air below. Extreme vertical stagnation; complete suppression of vertical mixing; traps pollutants near emission source.
Mechanisms of Atmospheric Inversions
Radiation Inversion (Nocturnal / Surface Inversion): Occurs on clear, cloudless nights with calm-to-light winds. The Earth's ground surface rapidly cools via longwave infrared radiative emission, chilling the air in direct contact with the ground while air aloft remains warmer. Typically dissolves 1–3 hours after sunrise as solar radiation heats the surface.
Subsidence Inversion: Occurs beneath semi-permanent high-pressure anticyclonic systems. Air aloft slowly sinks (subsides), compressing and warming adiabatically. This warm descending layer forms an elevated inversion lid at 500 to 2,000 meters above cooler coastal/marine surface air, trapping urban pollution basins (e.g., Los Angeles smog basin).
Advection Inversion: Forms when warm, moist air moves horizontally over a cold land or water surface, chilling the lowermost atmospheric layer.
2. Pasquill-Gifford Atmospheric Stability Classes
The Pasquill-Gifford system classifies atmospheric dispersion capacity into six operational categories based on surface wind speed (u10, measured at 10 m height), daytime solar radiation (insolation), and nighttime cloud cover.
Surface Wind Speed (u10 at 10 m) Daytime Solar Insolation: Strong (> 600 W/m²) Daytime Solar Insolation: Moderate (350-600 W/m²) Daytime Solar Insolation: Slight (< 350 W/m²) Nighttime: Thinly Overcast or ≥ 4/8 Low Cloud Nighttime: Clear or ≤ 3/8 Cloud Cover
- < 2 m/s (< 4.5 mph) Class A Class A – B Class B — —
- 2 - 3 m/s (4.5 - 6.7 mph) Class A – B Class B Class C Class E Class F
- 3 - 5 m/s (6.7 - 11.2 mph) Class B Class B – C Class C Class D Class E
- 5 - 6 m/s (11.2 - 13.4 mph) Class C Class C – D Class D Class D Class D
- > 6 m/s (> 13.4 mph) Class D Class D Class D Class D Class D
- Stability Class Definitions
Class A: Extremely Unstable (Intense summer midday sun, light wind < 2 m/s; intense convective mixing).
Class B: Moderately Unstable (Moderate daytime sun, light-to-moderate wind).
Class C: Slightly Unstable (Weak daytime sun or moderate wind).
Class D: Neutral (Overcast skies day or night, high winds > 6 m/s; mechanical shear dominates).
Class E: Slightly Stable (Nighttime with moderate cloud cover).
Class F: Moderately Stable (Clear, cloudless night with light winds < 3 m/s; intense nocturnal surface inversion). (Note: Some systems include Class G for extremely stable stagnation conditions).
3. Plume Dispersion Morphologies
The interaction between vertical lapse rates and smokestack height produces six distinct, classical plume behavior geometries: 1. LOOPING (Superadiabatic / Unstable) 2. CONING (Neutral / Adiabatic)
- Stack ────~~~~~~~ Stack ────=======
- (Turbulent eddies strike ground) (Symmetric cone, slow expansion)
- 3. FANNING (Surface Inversion) 4. LOFTING (Inversion Below Stack)
- Stack ─────────────────── Stack ───-~^~^~^~^ (Upward only)
- (Narrow ribbon, zero vertical spread) ══════════════════ (Ground protected)
- 5. FUMIGATION (Inversion Aloft, Mixed Below) 6. TRAPPING (Inversions Above & Below)
- ═══════════════════════════════════ ═══════════════════════════════════
- Stack ───vvvvvvvvv (Forced to ground) Stack ───========= (Trapped layer)
- (Worst-case ground concentration) ═══════════════════════════════════
- Detailed Plume Behavior Characteristics
Plume Type Atmospheric Stability Regime Vertical Temperature Profile Relative to Stack Height Dispersion Behavior & Ground-Level Exposure Risk
Looping Class A / B (Superadiabatic / Unstable) Unstable superadiabatic lapse rate exists throughout the entire boundary layer depth. Large convective thermal eddies buffet the plume up and down in loops. High ground-level concentrations occur intermittently very close to the stack when an eddy drives the plume downward.
Coning Class C / D (Neutral / Adiabatic) Neutral or slightly subadiabatic lapse rate extending above and below the stack. Plume expands symmetrically in horizontal and vertical directions forming a classic cone. Maximum ground-level concentration occurs at a moderate distance downwind.
Fanning Class E / F (Stable Inversion) Strong surface temperature inversion layer engulfs the stack height. Vertical turbulence is completely suppressed. Plume spreads horizontally into a thin, meandering fan or ribbon with virtually zero vertical dispersion. No ground-level contact occurs as long as the inversion persists.
Lofting Inversion Below, Neutral/Unstable Aloft A surface radiation inversion exists below the stack exit , while neutral or unstable air exists above the stack . Ideal industrial dispersion scenario. The surface inversion acts as an impermeable floor preventing any downward diffusion to ground level, while upward dispersion proceeds unrestricted. Zero ground-level impact.
Fumigation Inversion Aloft, Unstable Below Surface solar heating creates an unstable convective mixing layer near the ground that reaches up to stack height, while an undisturbed inversion remains aloft. Worst-case acute exposure scenario. Plume cannot disperse upward through the inversion lid; convective eddies mix the entire concentrated plume downward to ground level simultaneously across a broad swath.
Trapping Elevated Inversion Layer Inversions exist both above and below the stack release height (or a low subsidence lid traps air). Plume is bounded between two stable layers, preventing vertical dispersion beyond the confined boundary. Pollutants accumulate in high concentrations within the mixing channel.