Study guide
8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate
CIH Certified Industrial Hygienist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The CIH Exam and How to Use This Guide
1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan
2 Chapter 2: Basic Science & Calculations
2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals
3 Chapter 3: Air Sampling & Instrumentation
3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration
4 Chapter 4: Analytical Chemistry & Lab Methods
4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency
5 Chapter 5: Biostatistics & Epidemiology
5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection
6 Chapter 6: Toxicology & Biological Monitoring
6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring
7 Chapter 7: Biohazards & Indoor Environmental Quality
7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs
8 Chapter 8: Community Exposure & Environmental Health
8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know
9 Chapter 9: Health Risk Analysis & Hazard Communication
9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties
10 Chapter 10: Industrial Ventilation Principles & LEV Design
10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections
11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics
11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing
12 Chapter 12: Noise Measurement & Hearing Conservation
12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration
13 Chapter 13: Thermal Stress Assessment & Control
13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill
14 Chapter 14: Ionizing Radiation Protection
14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys
15 Chapter 15: Non-Ionizing Radiation & Laser Safety
15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance
16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment
16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control
17 Chapter 17: Ergonomics & Workstation Design
17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics
18 Chapter 18: Work Environments & Industrial Processes
18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation
19 Chapter 19: IH Program Management & Professional Ethics
19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement
8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate
Key Takeaways Explain This Topic AI
The Gaussian plume model predicts a downwind concentration that is inversely proportional to wind speed and to the product of the horizontal and vertical dispersion coefficients, which grow with downwind distance and instability.
Ground-level centreline concentration under a plume with reflection is C = (Q / (π·u·σy·σz))·exp(−H²/(2σz²)), so effective stack height enters as a squared exponential penalty.
Effective stack height is physical stack height plus Briggs plume rise from momentum and buoyancy; doubling effective height cuts maximum ground-level concentration by roughly a factor of four.
Multimedia partitioning is governed by the octanol-water partition coefficient (bioaccumulation), Henry law constant (volatilisation), and organic carbon partition coefficient (soil sorption and mobility).
Last updated: August 2026
Gaussian Plume Modeling, Plume Rise, and Environmental Fate
Stability class and plume shape are the qualitative picture. The Gaussian plume equation turns that picture into a predicted downwind concentration, and multimedia partitioning predicts where a chemical ends up once it leaves the air.
1. The Gaussian Plume Dispersion Model
The standard regulatory model for continuous stationary point source emissions assumes steady-state conditions, conservation of mass, and that turbulent diffusion causes pollutant concentrations to follow normal (Gaussian) distributions along both the lateral (y) and vertical (z) axes. z (Height)
- ▲
- │ Plume Centerline (z = H)
- │ . - - - - - - - - - - - - - -
- │ . /
- │ . σz / Wind (u)
- Stack (hs) ───┼─────────────────► ─────────►
- │ x (Downwind Distance)
- O└────────────────────────►
- / ◄────── σy ──────►
- /
- ▼ y (Crosswind Distance)
- Coordinate System Conventions
x-axis: Downwind direction along the mean horizontal wind vector (y = 0).
y-axis: Crosswind horizontal direction perpendicular to the mean wind vector.
z-axis: Vertical axis representing elevation above ground level (z = 0 is ground surface).
H: Effective stack height (H = hs + Δ h, where hs is physical stack height and Δ h is plume rise).
The Full 3D Point Source Gaussian Plume Equation
Accounting for total reflection of the plume at the ground surface (z = 0) using the method of virtual images: C ( x , y , z ; H ) = Q 2 π ⋅ u ⋅ σ y ⋅ σ z ⋅ exp ( − y 2 2 σ y 2 ) ⋅ [ exp ( − ( z − H ) 2 2 σ z 2 ) + exp ( − ( z + H ) 2 2 σ z 2 ) ] C(x,y,z; H) = \frac{Q}{2\pi \cdot u \cdot \sigma_y \cdot \sigma_z} \cdot \exp\left(-\frac{y^2}{2\sigma_y^2}\right) \cdot \left[ \exp\left(-\frac{(z - H)^2}{2\sigma_z^2}\right) + \exp\left(-\frac{(z + H)^2}{2\sigma_z^2}\right) \right] C ( x , y , z ; H ) = 2 π ⋅ u ⋅ σ y ⋅ σ z Q ⋅ exp ( − 2 σ y 2 y 2 ) ⋅ [ exp ( − 2 σ z 2 ( z − H ) 2 ) + exp ( − 2 σ z 2 ( z + H ) 2 ) ]
Where:
- C(x,y,z; H) = Pollutant concentration at receptor coordinate (x,y,z) (g/m³ or µg/m³)
- Q = Continuous mass emission rate from the stack (g/s or mg/s)
- u = Mean wind speed at effective stack height (H) (m/s)
- σy = Lateral (crosswind) dispersion coefficient (standard deviation of plume concentration spread, in meters)
- σz = Vertical dispersion coefficient (standard deviation of plume concentration spread, in meters)
- H = Effective stack height (meters)
- Ground-Level Centerline Concentration Equation (y = 0, z = 0)
For an observer on the ground directly along the downwind plume centerline (y = 0, z = 0): C ( x , 0 , 0 ; H ) = Q π ⋅ u ⋅ σ y ⋅ σ z ⋅ exp ( − H 2 2 σ z 2 ) C(x,0,0; H) = \frac{Q}{\pi \cdot u \cdot \sigma_y \cdot \sigma_z} \cdot \exp\left(-\frac{H^2}{2\sigma_z^2}\right) C ( x , 0 , 0 ; H ) = π ⋅ u ⋅ σ y ⋅ σ z Q ⋅ exp ( − 2 σ z 2 H 2 )
Ground-Level Release Equation (H = 0)
For a ground-level release (such as a surface spill or low fugitive leak where H = 0): C ( x , 0 , 0 ; 0 ) = Q π ⋅ u ⋅ σ y ⋅ σ z C(x,0,0; 0) = \frac{Q}{\pi \cdot u \cdot \sigma_y \cdot \sigma_z} C ( x , 0 , 0 ; 0 ) = π ⋅ u ⋅ σ y ⋅ σ z Q
Key Dispersion Relationships
Concentration is directly proportional to emission rate (C ∝ Q): Doubling stack emissions doubles ground-level concentration.
Concentration is inversely proportional to wind speed (C ∝ 1/u): Higher wind speeds stretch out the plume volume, increasing dilution.
Dispersion coefficients grow with downwind distance: Both σy(x) and σz(x) increase monotonically with downwind distance x, parameterized via empirical power-law equations (chief among them σy = a · x(b) and σz = c · x(d)).
Maximum Ground-Level Concentration Distance (xmax): For an elevated source, ground concentration is initially zero at the stack base (x = 0), rises to a peak maximum at xmax (where σz = H / √2 ≈ 0.707 H), and then decays asymptotically at long distances downwind as σy σz expansion dominates.
2. Effective Stack Height and Briggs Plume Rise (Δ h)
Effluent exiting a stack possesses vertical momentum (exit velocity vs) and thermal buoyancy (Ts > Ta). The plume bends over in the crosswind and rises to an Effective Stack Height (H) : H = h s + Δ h H = h_s + \Delta h H = h s + Δ h
Where hs is the physical stack height and Δ h is the plume rise calculated using the Briggs Plume Rise Equations .
Buoyancy Flux Parameter (Fb)
Thermal buoyancy dominates when stack gas exit temperature (Ts) significantly exceeds ambient air temperature (Ta): F b = g ⋅ v s ⋅ d 2 ⋅ ( T s − T a 4 ⋅ T s ) F_b = g \cdot v_s \cdot d^2 \cdot \left(\frac{T_s - T_a}{4 \cdot T_s}\right) F b = g ⋅ v s ⋅ d 2 ⋅ ( 4 ⋅ T s T s − T a )
Where:
- g = 9.81 m/s²
- vs = Stack gas exit velocity (m/s)
- d = Stack inside exit diameter (meters)
- Ts, Ta = Absolute temperatures of stack gas and ambient air, respectively (Kelvin)
- Briggs Final Plume Rise in Neutral and Unstable Conditions (Classes A–D)
For buoyant plumes with Fb < 55 m⁴/s³, final plume rise occurs at downwind distance xf = 49 · Fb(5/8): Δ h = 21.42 ⋅ F b 3 / 4 u \Delta h = 21.42 \cdot \frac{F_b^{3/4}}{u} Δ h = 21.42 ⋅ u F b 3/4
For buoyant plumes with Fb ≥ 55 m⁴/s³, final plume rise occurs at downwind distance xf = 119 · Fb(2/5): Δ h = 38.71 ⋅ F b 3 / 5 u \Delta h = 38.71 \cdot \frac{F_b^{3/5}}{u} Δ h = 38.71 ⋅ u F b 3/5
Briggs Plume Rise in Stable Conditions (Classes E and F)
In stable atmospheres, vertical rise is arrested by the ambient thermal inversion gradient (s is the atmospheric stability parameter: s = g/Ta dθ/dz): Δ h = 2.6 ⋅ ( F b u ⋅ s ) 1 / 3 \Delta h = 2.6 \cdot \left(\frac{F_b}{u \cdot s}\right)^{1/3} Δ h = 2.6 ⋅ ( u ⋅ s F b ) 1/3
3. Chemical Environmental Fate and Multimedia Partitioning
Once an organic chemical enters the environment, its distribution between air, water, soil, sediment, and biological tissue is dictated by fundamental physicochemical thermodynamic partition coefficients. ┌─────────────────────────────┐
- │ AIR (Atmosphere) │
- └──────────────┬──────────────┘
- │ ▲
- Henry's Law Constant (H) │ │ Volatilization
- ▼ │
- ┌─────────────────────────────┐
- │ WATER (Aqueous Phase) │
- └──────────────┬──────────────┘
- │ ▲
- Octanol-Water (Kow) │ │ Soil Adsorption (Koc / Kd)
- Bioconcentration (BCF) │ │
- ▼ │
- ┌───────────────────────────┴───────────────────────────┐
- ▼ ▼
- ┌───────────────────────────────┐ ┌───────────────────────────────┐
- │ BIOTA (Lipid / Tissue) │ │ SOIL / SEDIMENT (Organics) │
- └───────────────────────────────┘ └───────────────────────────────┘
- Octanol-Water Partition Coefficient (Kow / log Kow)
Kow is the ratio of chemical concentration in n-octanol (surrogate for biological lipid) to its concentration in pure water at equilibrium: K o w = C octanol C water K_{ow} = \frac{C_{\text{octanol}}}{C_{\text{water}}} K o w = C water C octanol
log Kow < 1: Highly hydrophilic (water-soluble); low lipophilicity; rapid excretion; negligible bioaccumulation.
log Kow = 1 - 4: Moderately lipophilic; intermediate bioaccumulation.
log Kow > 4 - 5: Highly hydrophobic and lipophilic ; strong affinity for adipose tissue; high potential for bioaccumulation and biomagnification up the trophic food chain (e.g., DDT log Kow ≈ 6.9, PCBs log Kow ≈ 6-8, Dioxins log Kow ≈ 6.8).
Bioconcentration Factor (BCF) and Bioaccumulation
Bioconcentration Factor (BCF): The ratio of chemical concentration in an aquatic organism (Cbiota, in mg/kg) to the concentration in ambient water (Cwater, in mg/L) resulting strictly from direct gill/integument exposure: BCF = C biota C water \text{BCF} = \frac{C_{\text{biota}}}{C_{\text{water}}} BCF = C water C biota
Mackay Empirical Estimation: For non-metabolized hydrophobic neutral organics: log BCF ≈ 0.85 ⋅ log K o w − 0.70 or BCF ≈ 0.048 ⋅ K o w \log \text{BCF} \approx 0.85 \cdot \log K_{ow} - 0.70 \quad \text{or} \quad \text{BCF} \approx 0.048 \cdot K_{ow} lo g BCF ≈ 0.85 ⋅ lo g K o w − 0.70 or BCF ≈ 0.048 ⋅ K o w
Soil Organic Carbon-Water Partition Coefficient (Koc and Kd)
Governs the chemical sorption onto organic matter in soils and aquifer sediments:
Kd (Soil Distribution Coefficient): Kd = Csoil/Caqueous (in L/kg).
Koc (Normalized to Soil Organic Carbon): Koc = Kd/foc, where foc is the mass fraction of organic carbon in the soil.
Groundwater Mobility Scale:
Koc < 50 mL/g : Very High Mobility (readily leaches into groundwater aquifers; e.g., vinyl chloride, MTBE).
Koc = 50 - 500 mL/g : Moderate Mobility (e.g., benzene, TCE).
Koc > 5,000 - 10,000 mL/g : Immobile (strongly bound to topsoil; e.g., PAHs, PCBs, heavy petroleum fractions).
Henry's Law Constant (H / KH)
Measures the equilibrium partitioning between the gaseous phase (air) and the aqueous phase (water): H = P vapor C aqueous ( expressed in atm ⋅ m 3 / mol ) H = \frac{P_{\text{vapor}}}{C_{\text{aqueous}}} \quad (\text{expressed in } \text{atm}\cdot\text{m}^3/\text{mol}) H = C aqueous P vapor ( expressed in atm ⋅ m 3 / mol )
Dimensionless Henry's Law Constant (H'): H ′ = C air C water = H R ⋅ T H' = \frac{C_{\text{air}}}{C_{\text{water}}} = \frac{H}{R \cdot T} H ′ = C water C air = R ⋅ T H
Where R = 8.2057 × 10⁻⁵ atm·m³/(mol·K) and T is temperature in Kelvin.
Volatilization Screening Criteria:
H > 10⁻³ atm·m³/mol : Rapid volatilization from surface waters (e.g., VOCs, TCE, tetrachloroethylene).
H = 10⁻⁵ - 10⁻³ atm·m³/mol : Moderate volatilization.
H < 10⁻⁵ atm·m³/mol : Low volatilization; chemical remains predominantly in the water column (e.g., phenol, alcohols).
- 4. Worked Step-by-Step Calculation Examples
- Worked Example 7.3: Gaussian Plume Ground-Level Centerline Concentration
Problem: A chemical plant discharges sulfur dioxide (SO2) continuously from a stack at a mass emission rate of Q = 50.0 g/s (50,000 mg/s). The effective stack height is H = 60.0 meters, and the mean wind speed at stack height is u = 4.0 m/s. At a downwind community receptor located on the centerline (y = 0, z = 0) at x = 1.5 km under Pasquill Stability Class C (Slightly Unstable), atmospheric dispersion coefficients are determined to be:
- σy = 150.0 meters
- σz = 85.0 meters
Calculate the steady-state ground-level centerline concentration of SO2 at the receptor in micrograms per cubic meter (µg/m³).
Solution Steps:
State the Ground-Level Centerline Gaussian Equation: C ( x , 0 , 0 ; H ) = Q π ⋅ u ⋅ σ y ⋅ σ z ⋅ exp ( − H 2 2 σ z 2 ) C(x,0,0; H) = \frac{Q}{\pi \cdot u \cdot \sigma_y \cdot \sigma_z} \cdot \exp\left(-\frac{H^2}{2\sigma_z^2}\right) C ( x , 0 , 0 ; H ) = π ⋅ u ⋅ σ y ⋅ σ z Q ⋅ exp ( − 2 σ z 2 H 2 )
Calculate the Pre-Exponential Dispersion Dilution Factor: Denominator = π × u × σ y × σ z \text{Denominator} = \pi \times u \times \sigma_y \times \sigma_z Denominator = π × u × σ y × σ z Denominator = π × 4.0 m/s × 150.0 m × 85.0 m = 160 , 221.2 m 3 / s \text{Denominator} = \pi \times 4.0\text{ m/s} \times 150.0\text{ m} \times 85.0\text{ m} = 160,221.2\text{ m}^3/\text{s} Denominator = π × 4.0 m/s × 150.0 m × 85.0 m = 160 , 221.2 m 3 / s Q π ⋅ u ⋅ σ y ⋅ σ z = 50.0 g/s 160 , 221.2 m 3 / s = 3.1207 × 10 − 4 g/m 3 = 312.07 μ g/m 3 \frac{Q}{\pi \cdot u \cdot \sigma_y \cdot \sigma_z} = \frac{50.0\text{ g/s}}{160,221.2\text{ m}^3/\text{s}} = 3.1207 \times 10^{-4}\text{ g/m}^3 = 312.07\ \mu\text{g/m}^3 π ⋅ u ⋅ σ y ⋅ σ z Q = 160 , 221.2 m 3 / s 50.0 g/s = 3.1207 × 1 0 − 4 g/m 3 = 312.07 μ g/m 3
Calculate the Exponential Elevation Decay Term: H 2 2 σ z 2 = ( 60.0 m ) 2 2 × ( 85.0 m ) 2 = 3 , 600 2 × 7 , 225 = 3 , 600 14 , 450 = 0.249135 \frac{H^2}{2\sigma_z^2} = \frac{(60.0\text{ m})^2}{2 \times (85.0\text{ m})^2} = \frac{3,600}{2 \times 7,225} = \frac{3,600}{14,450} = 0.249135 2 σ z 2 H 2 = 2 × ( 85.0 m ) 2 ( 60.0 m ) 2 = 2 × 7 , 225 3 , 600 = 14 , 450 3 , 600 = 0.249135 exp ( − 0.249135 ) = 0.77947 \exp(-0.249135) = 0.77947 exp ( − 0.249135 ) = 0.77947
Multiply the Factors to Compute Ground-Level Concentration (C): C = 312.07 μ g/m 3 × 0.77947 = 243.25 μ g/m 3 ≈ 243.3 μ g/m 3 C = 312.07\ \mu\text{g/m}^3 \times 0.77947 = 243.25\ \mu\text{g/m}^3 \approx 243.3\ \mu\text{g/m}^3 C = 312.07 μ g/m 3 × 0.77947 = 243.25 μ g/m 3 ≈ 243.3 μ g/m 3
Result: The predicted steady-state ground-level SO2 concentration is 243.3 µg/m³ (0.243 mg/m³).
Worked Example 7.4: Environmental Partitioning (Kd) and Fish Bioconcentration (BCF)
Problem: An industrial solvent released into a river basin has an octanol-water partition coefficient of log Kow = 3.50 (Kow = 10(3.50) = 3,162.3). Environmental testing indicates that riverbed sediment has a mass fraction of organic carbon of foc = 0.015 (1.5% organic carbon). The aqueous concentration of the solvent in the river water is measured at Cw = 0.050 mg/L (50 µg/L).
Estimate the soil organic carbon-water partition coefficient (Koc) using the empirical relation: log Koc = log Kow - 0.21.
Calculate the sediment-water distribution coefficient (Kd) in L/kg.
Estimate the Bioconcentration Factor (BCF) using BCF = 0.048 · Kow, and predict the steady-state concentration of the contaminant in fish tissue (Cfish) in mg/kg.
Solution Steps:
Calculate Koc: log K o c = 3.50 − 0.21 = 3.29 \log K_{oc} = 3.50 - 0.21 = 3.29 lo g K oc = 3.50 − 0.21 = 3.29 K o c = 10 3.29 = 1 , 949.8 L/kg ≈ 1 , 950 L/kg K_{oc} = 10^{3.29} = 1,949.8\text{ L/kg} \approx 1,950\text{ L/kg} K oc = 1 0 3.29 = 1 , 949.8 L/kg ≈ 1 , 950 L/kg
Calculate Sediment Distribution Coefficient (Kd): K d = K o c × f o c = 1 , 949.8 L/kg × 0.015 = 29.25 L/kg K_d = K_{oc} \times f_{oc} = 1,949.8\text{ L/kg} \times 0.015 = 29.25\text{ L/kg} K d = K oc × f oc = 1 , 949.8 L/kg × 0.015 = 29.25 L/kg
Calculate Bioconcentration Factor (BCF) and Tissue Concentration: BCF = 0.048 × 3 , 162.3 = 151.79 L/kg ≈ 151.8 L/kg \text{BCF} = 0.048 \times 3,162.3 = 151.79\text{ L/kg} \approx 151.8\text{ L/kg} BCF = 0.048 × 3 , 162.3 = 151.79 L/kg ≈ 151.8 L/kg C fish = BCF × C w = 151.79 L/kg × 0.050 mg/L = 7.589 mg/kg ≈ 7.59 mg/kg C_{\text{fish}} = \text{BCF} \times C_w = 151.79\text{ L/kg} \times 0.050\text{ mg/L} = 7.589\text{ mg/kg} \approx 7.59\text{ mg/kg} C fish = BCF × C w = 151.79 L/kg × 0.050 mg/L = 7.589 mg/kg ≈ 7.59 mg/kg
Result: The sediment distribution coefficient is 29.25 L/kg , the estimated BCF is 151.8 , and the predicted fish tissue burden is 7.59 mg/kg .