Study guide

17.5 Anthropometry and Workstation Geometry

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

17.5 Anthropometry and Workstation Geometry

Key Takeaways Explain This Topic AI

Design for clearance uses a large percentile (typically the 95th male) so the largest users fit; design for reach uses a small percentile (typically the 5th female) so the smallest users can reach.

Adjustability is designed to span the 5th percentile female to 95th percentile male range, covering roughly 90% of the working population.

Anthropometric tables are structural (static) dimensions; functional (dynamic) reach differs because it involves trunk motion, and clothing and PPE add allowances that must be applied explicitly.

Work height follows the task: precision work above elbow height with arm support, light assembly slightly below elbow height, and heavy work well below elbow height to allow force from the trunk and legs.

Last updated: August 2026

Anthropometry and Workstation Geometry

The implementation of ergonomic controls follows the classical Hierarchy of Controls . Engineering controls represent the most effective and reliable defense against WMSDs by physically eliminating or substituting hazards at the workstation, machine, or tool interface. When engineering modifications are technically or economically constrained, administrative controls and work practice modifications serve as complementary measures to manage remaining physiological burdens.

1. Anthropometry Principles in Workstation Design

Anthropometry is the scientific measurement of human physical dimensions, mass, reach, and functional joint ranges of motion. Because human physical dimensions follow a normal (Gaussian) distribution, designing a workstation requires applying rigorous statistical percentile principles. +-------------------------------------------------------------------------+

  • | GAUSSIAN ANTHROPOMETRIC DISTRIBUTION |
  • +-------------------------------------------------------------------------+
  • | |
  • | Frequency |
  • | ^ |
  • | | .---''''''---. |
  • | | .-' '-. |
  • | | .' '. |
  • | | .' '. |
  • | | .' '. |
  • | | .' '. |
  • | | .-' '-. |
  • | +-------*--------------------*--------------------*---------> |
  • | 5th Percentile 50th 95th Dimension |
  • | (µ - 1.645σ) (Mean: µ) (µ + 1.645σ) |
  • | [Design for Reach] [Design for Clearance] |
  • | |
  • | |<------- 5th to 95th Percentile Range (90% Coverage) ------->||
  • +-------------------------------------------------------------------------+

The Three Core Anthropometric Design Rules +-------------------------------------------------------------------------+

  • | CORE ANTHROPOMETRIC DESIGN STRATEGIES |
  • +-------------------------------------------------------------------------+
  • | |
  • | Design Principle | Target Dimension | Common Applications |
  • +---------------------------+----------------------+----------------------+
  • | 1. Design for Extremes: | 5th Percentile | Maximum reach limits,|
  • | Minimum Extremity | Female | control buttons, |
  • | | (µ - 1.645σ) | shelf depths, pedals |
  • +---------------------------+----------------------+----------------------+
  • | 2. Design for Extremes: | 95th Percentile | Clearances, doorway |
  • | Maximum Extremity | Male | heights, legroom, |
  • | | (µ + 1.645σ) | thigh clearance |
  • +---------------------------+----------------------+----------------------+
  • | 3. Design for Adjustable | 5th Percentile Female| Chair heights, desk |
  • | Range (5th to 95th) | to 95th Male | elevations, monitor |
  • | | (90% Population) | arms, vehicle seats |
  • +---------------------------+----------------------+----------------------+
  • | 4. Design for Average | 50th Percentile | Non-critical public |
  • | (Special Exception) | (Mean: µ) | spaces only (water |
  • | | | fountains, counters) |
  • +-------------------------------------------------------------------------+

Design for the Extremes (Minimum Dimension / 5th Percentile Female):

Used for reach dimensions , operating limits, and manual control placement.

If a reach distance, shelf height, emergency stop button, or foot pedal is accessible to a 5th percentile female (representing the shortest reach envelope in the workforce), it will be comfortably reachable by 95% of females and > 99% of males (97.5% of the total workforce).

Design for the Extremes (Maximum Dimension / 95th Percentile Male):

Used for clearance dimensions , openings, structural apertures, and safety enclosures.

If a doorway height, overhead ceiling clearance, thigh clearance beneath a desk, or maintenance access hatch accommodates a 95th percentile male (representing the tallest stature and widest breadth), it will clear > 99% of females and 95% of males without head strikes, knee entrapment, or postural constriction.

Design for an Adjustable Range (5th Percentile Female to 95th Percentile Male):

Mandated for critical workstation interfaces that directly influence posture, including office chairs, standing desk heights, vehicle seats, steering wheels, and computer monitor arms.

The standard industrial adjustability envelope spans from the 5th percentile female value to the 95th percentile male value , accommodating 90% of a mixed workforce .

The Fallacy of Designing for the "Average" (50th Percentile):

Designing a workstation for the 50th percentile (the "average man") is a critical engineering error. Anthropometric dimensions do not correlate perfectly across body segments; an individual with 50th percentile height often has 75th percentile leg length and 25th percentile arm reach. Designing for the average produces a workstation that fits virtually nobody .

Designing for the average is permissible only for non-critical, fixed public installations (e.g., public water fountains, bank teller counters, supermarket checkout lanes) where adjustability is impractical and exposure duration is brief (< 1--2 minutes).

2. Workstation Geometry: Seated vs. Standing Workstations

Work surface height is the primary determinant of upper body and spinal posture during manual tasks. The universal anatomical reference point for workstation height is the operator's resting elbow height (measured with the upper arm hanging vertically and the elbow flexed at 90°). +-------------------------------------------------------------------------+

  • | WORK SURFACE HEIGHT RELATIVE TO RESTING ELBOW DATUM |
  • +-------------------------------------------------------------------------+
  • | |
  • | Task Category | Height Relative to Elbow | Primary Rationale |
  • +----------------------+--------------------------+-----------------------+
  • | Precision Work | 2 to 4 inches ABOVE | Reduces neck flexion; |
  • | (Micro-assembly, | (+5 to +10 cm) | brings work close to |
  • | soldering, drawing)| | eyes; supports elbows |
  • +----------------------+--------------------------+-----------------------+
  • | Light Assembly | 2 to 4 inches BELOW | Allows relaxed forearm|
  • | (Bench assembly, | (-5 to -10 cm) | slope; avoids shoulder|
  • | packaging, typing) | | elevation/fatigue |
  • +----------------------+--------------------------+-----------------------+
  • | Heavy Manual Work | 4 to 8 inches BELOW | Utilizes upper trunk |
  • | (Heavy packing, | (-10 to -20 cm) | body weight to exert |
  • | forceful tool use) | | downward forces |

+-------------------------------------------------------------------------+ +-------------------------------------------------------------------------+

  • | WORK SURFACE HEIGHT RELATIONSHIPS (DATUM) |
  • +-------------------------------------------------------------------------+
  • | |
  • | +4 in (10 cm) --+---------------------- [ PRECISION WORK SURFACE ] |
  • | | |
  • | Elbow Level ----*====================== [ RESTING ELBOW DATUM ] |
  • | | |
  • | -4 in (10 cm) --+---------------------- [ LIGHT ASSEMBLY SURFACE ] |
  • | | |
  • | -8 in (20 cm) --+---------------------- [ HEAVY MANUAL WORK ] |
  • | |
  • +-------------------------------------------------------------------------+
  • Task Selection: Seated vs Standing Work

Seated Workstations are Preferred When:

All required tools and parts are within easy, non-extended reach envelopes (< 16--20 in).

The task requires high visual acuity, fine motor control, or precision hand manipulation.

The task does not require heavy lifting (< 10 lb / 4.5 kg).

Operations are performed continuously for extended durations (> 30 minutes).

Standing Workstations are Preferred When:

The job requires handling heavy or bulky objects (> 10 lb) requiring downward body weight.

The workstation requires high mobility, lateral stepping, or reach across wide envelopes (> 20 in).

High downward forces must be exerted using the upper body and shoulder musculature.

Sit-Stand Adjustable Workstations: Represent the gold standard for office and light assembly environments. Periodic posture alternations (e.g., 45 minutes sitting followed by 15 minutes standing) prevent lumbar static loading, decompress intervertebral discs, and improve lower extremity venous circulation.