Study guide
17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV
CIH Certified Industrial Hygienist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The CIH Exam and How to Use This Guide
1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan
2 Chapter 2: Basic Science & Calculations
2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals
3 Chapter 3: Air Sampling & Instrumentation
3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration
4 Chapter 4: Analytical Chemistry & Lab Methods
4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency
5 Chapter 5: Biostatistics & Epidemiology
5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection
6 Chapter 6: Toxicology & Biological Monitoring
6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring
7 Chapter 7: Biohazards & Indoor Environmental Quality
7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs
8 Chapter 8: Community Exposure & Environmental Health
8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know
9 Chapter 9: Health Risk Analysis & Hazard Communication
9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties
10 Chapter 10: Industrial Ventilation Principles & LEV Design
10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections
11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics
11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing
12 Chapter 12: Noise Measurement & Hearing Conservation
12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration
13 Chapter 13: Thermal Stress Assessment & Control
13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill
14 Chapter 14: Ionizing Radiation Protection
14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys
15 Chapter 15: Non-Ionizing Radiation & Laser Safety
15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance
16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment
16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control
17 Chapter 17: Ergonomics & Workstation Design
17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics
18 Chapter 18: Work Environments & Industrial Processes
18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation
19 Chapter 19: IH Program Management & Professional Ethics
19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement
17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV
Key Takeaways Explain This Topic AI
RULA scores upper-limb posture, muscle use, and force, producing an action level of 1 to 4; REBA extends the analysis to the trunk, legs, and whole-body dynamic tasks.
The Moore-Garg Strain Index multiplies six task variables — intensity of exertion, duration of exertion, exertions per minute, hand/wrist posture, speed of work, and duration per day — with scores above 7 indicating hazardous distal upper-extremity tasks.
The ACGIH Hand Activity Level TLV plots normalised peak force against hand activity level, defining a TLV line and a lower action limit line.
Observational tools are screening instruments: they prioritise jobs for redesign but do not establish causation or replace direct measurement.
Last updated: August 2026
RULA, REBA, the Strain Index, and the ACGIH HAL TLV
The NIOSH equation evaluates two-handed sagittal lifting only. Most workplace ergonomic risk is postural, repetitive, or upper-limb, which is what the observational and semi-quantitative tools in this section are built to score.
1. Rapid Upper Limb Assessment (RULA)
Developed by McAtamney and Corlett in 1993, RULA is a survey tool designed for use in ergonomics investigations of workplaces where work-related upper limb disorders are reported. It evaluates postural loading, muscle use, and external forces on the neck, trunk, and upper limbs in seated or standing sedentary/light assembly tasks (e.g., VDT operations, sewing, electronics assembly, inspection). +-------------------------------------------------------------------------+
- | RULA SCORING ARCHITECTURE |
- +-------------------------------------------------------------------------+
- | |
- | [GROUP A: Upper Limb] [GROUP B: Neck, Trunk, Legs] |
- | • Upper Arm Posture (1-6) • Neck Posture (1-6) |
- | • Lower Arm Posture (1-3) • Trunk Posture (1-6) |
- | • Wrist Posture (1-4) • Legs Support (1-2) |
- | • Wrist Twist (1-2) | |
- | | | |
- | v v |
- | Table A Score Table B Score |
- | + + |
- | Muscle Use Score (0 or +1) Muscle Use Score (0 or +1) |
- | (Static > 1 min or (Static > 1 min or |
- | Repetitive > 4x/min) Repetitive > 4x/min) |
- | + + |
- | Force/Load Score (0 to +3) Force/Load Score (0 to +3) |
- | (<4.4 lb: 0, 4.4-22 lb: 1-2, (<4.4 lb: 0, 4.4-22 lb: 1-2, |
- | >22 lb/shock: +3) >22 lb/shock: +3) |
- | | | |
- | v v |
- | Score C Score D |
- | \ / |
- | \ / |
- | v v |
- | Table C Score |
- | GRAND SCORE (1 - 7) |
- +-------------------------------------------------------------------------+
- RULA Action Levels
Action Level 1 (Score 1–2): Posture is acceptable if not maintained or repeated over long periods. (Negligible risk).
Action Level 2 (Score 3–4): Further investigation is needed and changes may be required. (Low risk).
Action Level 3 (Score 5–6): Investigation and changes are required soon. (Medium risk).
Action Level 4 (Score 7): Investigation and changes are required immediately. (High risk).
2. Rapid Entire Body Assessment (REBA)
Developed by Hignett and McAtamney in 2000, REBA was formulated specifically to address dynamic, unpredictable, whole-body postures encountered in healthcare (patient handling, bed transfers), warehousing, heavy maintenance, construction, and service industries where lower extremity postures and unpredictable load coupling are critical. +-------------------------------------------------------------------------+
- | REBA SCORING ARCHITECTURE |
- +-------------------------------------------------------------------------+
- | |
- | [GROUP A: Trunk, Neck, Legs] [GROUP B: Upper Arm, Lower Arm, Wrist]|
- | • Trunk Posture (1-5) • Upper Arm Posture (1-6) |
- | • Neck Posture (1-3) • Lower Arm Posture (1-2) |
- | • Legs Posture (1-4) • Wrist Posture (1-3) |
- | | | |
- | v v |
- | Table A Score Table B Score |
- | + + |
- | Load / Force Score (0 to +3) Coupling Score (0 to +3) |
- | (<11 lb: 0, 11-22 lb: 1, (Good: 0, Fair: 1, |
- | >22 lb: 2, Shock: +1) Poor: 2, Unacceptable: 3) |
- | | | |
- | v v |
- | Score A Score B |
- | \ / |
- | \ / |
- | v v |
- | Table C Score |
- | + |
- | Activity Score (0 to +3) |
- | (+1: Static > 1 min) |
- | (+1: Repetitive > 4x/min) |
- | (+1: Rapid unstable posture change) |
- | | |
- | v |
- | REBA FINAL SCORE (1 - 15) |
- +-------------------------------------------------------------------------+
- REBA Action Levels
Action Level 0 (Score 1): Negligible risk; no action necessary.
Action Level 1 (Score 2–3): Low risk; change may be needed.
Action Level 2 (Score 4–7): Medium risk; further investigation; change soon.
Action Level 3 (Score 8–10): High risk; investigate and implement change promptly.
Action Level 4 (Score 11–15): Very high risk; implement changes immediately.
Summary Comparison: RULA vs REBA
Feature RULA (McAtamney & Corlett, 1993) REBA (Hignett & McAtamney, 2000)
Primary Scope Upper limb loading in sedentary/standing desk & bench tasks Whole-body postures in dynamic, unpredictable tasks (healthcare, warehousing)
- Body Regions Group A: Arms/wrists; Group B: Neck/trunk/legs Group A: Trunk/neck/legs; Group B: Arms/wrists
- Coupling / Grasp Evaluated within Load/Force score Dedicated detailed Coupling Score (0–3)
Activity Scoring Static (> 1 min) or repetitive (> 4×/min) added to each group Dedicated Activity Score including unstable base/rapid posture shifts
- Score Range 1 to 7 (4 Action Levels) 1 to 15 (5 Action Levels)
- 3. Moore-Garg Strain Index (SI) and ACGIH HAL TLV
For hand-intensive, mono-task repetitive industrial operations (e.g., meat packing, poultry processing, small parts manufacturing), ergonomists employ specialized distal upper extremity tools.
The Moore-Garg Strain Index (SI)
Published by Moore and Garg in 1995, the Strain Index (SI) is a semi-quantitative job analysis method that evaluates the risk of distal upper extremity (wrist, hand, elbow) musculoskeletal disorders. Strain Index (SI) = IE × DE × EM × HWP × SW × DD \mathbf{\text{Strain Index (SI)} = \text{IE} \times \text{DE} \times \text{EM} \times \text{HWP} \times \text{SW} \times \text{DD}} Strain Index (SI) = IE × DE × EM × HWP × SW × DD
Where the six multiplicative exposure parameters are:
Intensity of Exertion (IE): Borg CR-10 rating / % MVC (1.0 Light to 13.0 Near Maximal).
Duration of Exertion (DE): Percent of cycle time performing exertion (0.5 for <10% to 3.0 for >80%).
Efforts per Minute (EM): Frequency of exertions (0.5 for <4/min to 3.0 for ≥ 20/min).
Hand/Wrist Posture (HWP): Wrist extension/flexion/ulnar deviation (1.0 Perfect to 3.0 Extreme).
Speed of Work (SW): Perceived pacing (1.0 Normal to 2.0 Very Fast).
Duration per Day (DD): Exposure hours per day (0.25 for <1 hr to 1.5 for ≥ 8 hr).
Strain Index Risk Classification:
SI ≤ 3: Job is probably safe.
3 < SI ≤ 7: Job is uncertain; elevated risk for some workers.
SI > 7: Job is strongly associated with distal upper extremity disorders; high risk requiring ergonomic intervention.
The ACGIH Hand Activity Level (HAL) TLV
The ACGIH Hand Activity Level (HAL) TLV applies to repetitive mono-task hand work performed for 4 or more hours per day. It integrates two primary parameters:
Hand Activity Level (HAL): A 0-to-10 scale assessing repetition and duty cycle (ratio of exertion to rest), determined by visual observation or video analysis.
Normalized Peak Force (NPF): A 0-to-10 scale assessing peak hand grip/pinch force normalized to the worker population's maximum voluntary contraction (where 10 = 100% MVC, using the Borg CR-10 scale or EMG). +-------------------------------------------------------------------------+
- | ACGIH HAND ACTIVITY LEVEL (HAL) TLV MATRIX |
- +-------------------------------------------------------------------------+
- | |
- | Normalized Peak Force (NPF: 0 - 10) |
- | 10 | |
- | 8 | UNACCEPTABLE REGION (Above TLV) |
- | 6 | /----------------- TLV Boundary |
- | 4 | ACTION REGION /----------------- Action Limit (AL) |
- | 2 | SAFE REGION / |
- | 0 +--------------------------+---------------------------> |
- | 0 5 10 |
- | Hand Activity Level (HAL: 0 - 10) |
- +-------------------------------------------------------------------------+
Threshold Equations:
- ACGIH TLV Line: NPF = 0.56 × (10 - HAL) (or NPF/(10 - HAL) = 0.56)
- Action Limit (AL) Line: NPF = 0.40 × (10 - HAL) (or NPF/(10 - HAL) = 0.40)
Interpretation: If the intersection of NPF and HAL lies above the TLV line , the job is unacceptable and mandates immediate engineering redesign. If the point lies between the Action Limit and TLV , administrative controls, medical surveillance, and ergonomic hazard evaluations are required.
- 4. Worked Step-by-Step Calculation Examples
- Worked Example 16.2.1: Full RNLE & Lifting Index Calculation for a Warehouse Packing Job
Problem: A warehouse worker manually lifts boxes of machine parts from a low conveyor pallet and places them onto a high packing table for 1.5 hours per day. The job parameters are measured as follows:
- Actual box weight (L) = 32 lb
- Horizontal distance at origin (H) = 15 in
- Vertical origin height (V) = 18 in
- Vertical destination height (Vdest) = 42 in (Travel distance D = 42 - 18 = 24 in)
- Asymmetry angle (A) = 30°
- Lifting frequency (F) = 3 lifts/min
- Frequency Multiplier (FM) from NIOSH table (for 1.5 hr, V < 30 in, 3 lifts/min) = 0.88
- Coupling (CM) = Fair containers (V < 30 in → CM = 0.95)
Calculate the Recommended Weight Limit (RWL) and the Lifting Index (LI). Interpret the risk.
Solution Steps:
Identify Load Constant (LC): L C = 51.0 lb LC = 51.0\text{ lb} L C = 51.0 lb
Calculate Horizontal Multiplier (HM): H M = 10 H = 10 15 = 0.667 HM = \frac{10}{H} = \frac{10}{15} = 0.667 H M = H 10 = 15 10 = 0.667
Calculate Vertical Multiplier (VM): V M = 1 − ( 0.0075 × ∣ V − 30 ∣ ) = 1 − ( 0.0075 × ∣ 18 − 30 ∣ ) = 1 − ( 0.0075 × 12 ) = 1 − 0.090 = 0.910 VM = 1 - (0.0075 \times |V - 30|) = 1 - (0.0075 \times |18 - 30|) = 1 - (0.0075 \times 12) = 1 - 0.090 = 0.910 V M = 1 − ( 0.0075 × ∣ V − 30∣ ) = 1 − ( 0.0075 × ∣18 − 30∣ ) = 1 − ( 0.0075 × 12 ) = 1 − 0.090 = 0.910
Calculate Distance Multiplier (DM): D M = 0.82 + 1.8 D = 0.82 + 1.8 24 = 0.82 + 0.075 = 0.895 DM = 0.82 + \frac{1.8}{D} = 0.82 + \frac{1.8}{24} = 0.82 + 0.075 = 0.895 D M = 0.82 + D 1.8 = 0.82 + 24 1.8 = 0.82 + 0.075 = 0.895
Calculate Asymmetric Multiplier (AM): A M = 1 − ( 0.0032 × A ) = 1 − ( 0.0032 × 30 ) = 1 − 0.096 = 0.904 AM = 1 - (0.0032 \times A) = 1 - (0.0032 \times 30) = 1 - 0.096 = 0.904 A M = 1 − ( 0.0032 × A ) = 1 − ( 0.0032 × 30 ) = 1 − 0.096 = 0.904
Multiply all factors to find RWL: RWL = L C × H M × V M × D M × A M × F M × C M \text{RWL} = LC \times HM \times VM \times DM \times AM \times FM \times CM RWL = L C × H M × V M × D M × A M × FM × CM RWL = 51.0 × 0.667 × 0.910 × 0.895 × 0.904 × 0.88 × 0.95 \text{RWL} = 51.0 \times 0.667 \times 0.910 \times 0.895 \times 0.904 \times 0.88 \times 0.95 RWL = 51.0 × 0.667 × 0.910 × 0.895 × 0.904 × 0.88 × 0.95 RWL = 51.0 × 0.667 = 34.017 \text{RWL} = 51.0 \times 0.667 = 34.017 RWL = 51.0 × 0.667 = 34.017 34.017 × 0.910 = 30.955 34.017 \times 0.910 = 30.955 34.017 × 0.910 = 30.955 30.955 × 0.895 = 27.705 30.955 \times 0.895 = 27.705 30.955 × 0.895 = 27.705 27.705 × 0.904 = 25.045 27.705 \times 0.904 = 25.045 27.705 × 0.904 = 25.045 25.045 × 0.88 = 22.040 25.045 \times 0.88 = 22.040 25.045 × 0.88 = 22.040 22.040 × 0.95 = 20.94 lb 22.040 \times 0.95 = \mathbf{20.94\text{ lb}} 22.040 × 0.95 = 20.94 lb
Calculate the Lifting Index (LI): LI = L RWL = 32 lb 20.94 lb = 1.53 \text{LI} = \frac{L}{\text{RWL}} = \frac{32\text{ lb}}{20.94\text{ lb}} = \mathbf{1.53} LI = RWL L = 20.94 lb 32 lb = 1.53
Risk Interpretation & Recommendations:
Because 1.0 < LI = 1.53 < 3.0, the job poses an increased risk of lower back injury for a portion of the industrial workforce.
Primary Hazard Driver: The largest penalty is HM = 0.667 (horizontal reach of 15 in). Redesign recommendations: bring the pallet closer to the worker to reduce H to 10 in (HM = 1.0) and utilize a scissor lift table to raise V from 18 in to knuckle height (30 in). This would increase RWL to 34.5 lb and drop LI to 0.93 (safe).
Worked Example 16.2.2: ACGIH Hand Activity Level (HAL) TLV Evaluation
Problem: A worker in a meat processing plant uses a boning knife for 6 hours per day. Video analysis establishes a Hand Activity Level of HAL = 6.0. Electromyography (EMG) and subjective Borg CR-10 ratings determine a Normalized Peak Force of NPF = 3.0.
Determine whether this task exceeds the ACGIH Action Limit or TLV.
Solution Steps:
Calculate the TLV Peak Force threshold at HAL = 6.0: NPF TLV = 0.56 × ( 10 − HAL ) = 0.56 × ( 10 − 6.0 ) = 0.56 × 4.0 = 2.24 \text{NPF}_{\text{TLV}} = 0.56 \times (10 - \text{HAL}) = 0.56 \times (10 - 6.0) = 0.56 \times 4.0 = 2.24 NPF TLV = 0.56 × ( 10 − HAL ) = 0.56 × ( 10 − 6.0 ) = 0.56 × 4.0 = 2.24
Calculate the Action Limit Peak Force threshold at HAL = 6.0: NPF AL = 0.40 × ( 10 − HAL ) = 0.40 × ( 10 − 6.0 ) = 0.40 × 4.0 = 1.60 \text{NPF}_{\text{AL}} = 0.40 \times (10 - \text{HAL}) = 0.40 \times (10 - 6.0) = 0.40 \times 4.0 = 1.60 NPF AL = 0.40 × ( 10 − HAL ) = 0.40 × ( 10 − 6.0 ) = 0.40 × 4.0 = 1.60
Evaluate against actual exertion:
Actual NPF = 3.0.
Since Actual NPF (3.0) > NPFTLV (2.24), the task lies in the Unacceptable Region above the TLV .
Conclusion: The task presents a significant risk of distal upper extremity WMSD. Corrective engineering controls (knife blade sharpening protocols, powered cutting tools, or reduced duty cycle) are legally and professionally required.