Study guide
14.4 Shielding Physics, Material Selection, and Gamma Constants
CIH Certified Industrial Hygienist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The CIH Exam and How to Use This Guide
1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan
2 Chapter 2: Basic Science & Calculations
2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals
3 Chapter 3: Air Sampling & Instrumentation
3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration
4 Chapter 4: Analytical Chemistry & Lab Methods
4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency
5 Chapter 5: Biostatistics & Epidemiology
5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection
6 Chapter 6: Toxicology & Biological Monitoring
6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring
7 Chapter 7: Biohazards & Indoor Environmental Quality
7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs
8 Chapter 8: Community Exposure & Environmental Health
8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know
9 Chapter 9: Health Risk Analysis & Hazard Communication
9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties
10 Chapter 10: Industrial Ventilation Principles & LEV Design
10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections
11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics
11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing
12 Chapter 12: Noise Measurement & Hearing Conservation
12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration
13 Chapter 13: Thermal Stress Assessment & Control
13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill
14 Chapter 14: Ionizing Radiation Protection
14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys
15 Chapter 15: Non-Ionizing Radiation & Laser Safety
15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance
16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment
16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control
17 Chapter 17: Ergonomics & Workstation Design
17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics
18 Chapter 18: Work Environments & Industrial Processes
18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation
19 Chapter 19: IH Program Management & Professional Ethics
19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement
14.4 Shielding Physics, Material Selection, and Gamma Constants
Key Takeaways Explain This Topic AI
Photon attenuation is exponential: I = I0·e^(−µx), with the half-value layer HVL = 0.693/µ and the tenth-value layer TVL = 2.303/µ, so one TVL equals about 3.32 HVLs.
Shielding material must match the radiation: high-Z lead or steel for gamma and X-rays, low-Z plastic or aluminium for beta to minimise bremsstrahlung, and hydrogenous material such as water, concrete, or borated polyethylene for neutrons.
Shielding a high-energy beta emitter with lead is a classic error: the high atomic number maximises bremsstrahlung X-ray production, creating a penetrating secondary hazard.
The specific gamma-ray constant Γ gives exposure rate per unit activity at unit distance, so exposure rate X = Γ·A/d² lets a field dose rate be predicted directly from source activity and distance.
Last updated: August 2026
Shielding Physics, Material Selection, and Gamma Constants
Time and distance are free; shielding costs money and space, which is why it is the third cardinal principle rather than the first. Designing it requires the attenuation mathematics and a material matched to the radiation type.
1. Cardinal Principle 3: Shielding Physics and Mathematics
When time and distance cannot achieve ALARA goals, physical attenuating barriers must be placed between the source and occupational personnel. +--------------------------------------------------------------------------+
- | PHOTON ATTENUATION FORMULAS |
- | |
- | 1. Narrow-Beam Attenuation: I = I_0 • e^(-µx) |
- | 2. Half-Value Layer: HVL = ln(2) / µ = 0.69315 / µ |
- | 3. Tenth-Value Layer: TVL = ln(10) / µ = 2.3026 / µ ≈ 3.32 • HVL |
- | 4. Multi-Layer Attenuation: I = I_0 • (1/2)^n = I_0 • (10)^(-m) |
- | 5. Broad-Beam with Buildup: I = I_0 • B(E, Z, µx) • e^(-µx) |
- +--------------------------------------------------------------------------+
- 1. Narrow-Beam Exponential Attenuation
For monoenergetic photon beams under narrow-beam (good geometry) conditions without scattered photon buildup: I = I 0 e − μ x = I 0 e − ( μ / ρ ) ⋅ ( ρ x ) \mathbf{I = I_0 e^{-\mu x} = I_0 e^{-(\mu / \rho) \cdot (\rho x)}} I = I 0 e − μ x = I 0 e − ( μ / ρ ) ⋅ ( ρ x )
Where:
- I0 = Initial unshielded photon intensity / dose rate
- I = Transmitted photon intensity after penetrating shield thickness x
µ = Linear Attenuation Coefficient of the material (cm⁻¹), representing the fractional reduction in photon intensity per unit thickness.
µ / ρ = Mass Attenuation Coefficient (cm²/g), independent of the physical density or state of matter.
- ρ = Material density (g/cm³)
- ρ x = Mass thickness (g/cm²)
- 2. Half-Value Layer (HVL) and Tenth-Value Layer (TVL)
Half-Value Layer (HVL): The thickness of an absorber required to attenuate the incident radiation beam intensity by exactly 50% (1/2 of initial intensity): H V L = ln ( 2 ) μ = 0.69315 μ \mathbf{HVL = \frac{\ln(2)}{\mu} = \frac{0.69315}{\mu}} HVL = μ ln ( 2 ) = μ 0.69315 I = I 0 ( 1 2 ) n = I 0 ( 1 2 ) x H V L \mathbf{I = I_0 \left(\frac{1}{2}\right)^n = I_0 \left(\frac{1}{2}\right)^{\frac{x}{HVL}}} I = I 0 ( 2 1 ) n = I 0 ( 2 1 ) HVL x
Where n = x / HVL is the number of half-value layers installed.
Tenth-Value Layer (TVL): The thickness of an absorber required to attenuate beam intensity by 90% (leaving 10% or 1/10 of initial intensity): T V L = ln ( 10 ) μ = 2.3026 μ ≈ 3.3219 × H V L \mathbf{TVL = \frac{\ln(10)}{\mu} = \frac{2.3026}{\mu} \approx 3.3219 \times HVL} TVL = μ ln ( 10 ) = μ 2.3026 ≈ 3.3219 × HVL I = I 0 ( 1 10 ) m = I 0 ( 10 ) − m = I 0 ( 10 ) − x T V L \mathbf{I = I_0 \left(\frac{1}{10}\right)^m = I_0 \left(10\right)^{-m} = I_0 \left(10\right)^{-\frac{x}{TVL}}} I = I 0 ( 10 1 ) m = I 0 ( 10 ) − m = I 0 ( 10 ) − TVL x
Where m = x / TVL is the number of tenth-value layers.
3. Broad-Beam Geometry and the Buildup Factor (B)
In real-world engineering environments, radiation shields have large lateral surface areas. Secondary Compton-scattered photons generated within the shield deflect forward and strike the detector, creating a higher dose rate than predicted by simple exponential attenuation. To correct for this forward scatter, the Buildup Factor (B) is applied: I = I 0 ⋅ B ( E , Z , μ x ) ⋅ e − μ x \mathbf{I = I_0 \cdot B(E, Z, \mu x) \cdot e^{-\mu x}} I = I 0 ⋅ B ( E , Z , μ x ) ⋅ e − μ x
Where B ≥ 1.0. The value of B depends on photon energy (E), absorber atomic number (Z), shield thickness (in mean free paths, µ x), and spatial collimation geometry.
2. Comprehensive Shielding Selection Matrix by Radiation Modality
Selecting the correct shielding material requires matching the physical interaction mechanics of the specific radiation type. Utilizing the wrong material can paradoxically increase radiation hazard levels. +-------------------------------------------------------------------------------------------------+
- | RADIATION SHIELDING MATRIX |
- | |
- | RADIATION TYPE PRIMARY SHIELD MATERIAL PHYSICAL MECHANISM / DESIGN CRITICALITY |
- | ─────────────────────────────────────────────────────────────────────────────────────────── |
- | • Alpha (α) Paper, Thin Plastic, Air Total absorption within stratum corneum (~70 µm). |
- | External shield unnecessary; contain internally. |
- | |
- | • Beta (β) Low-Z: Plexiglass, Lucite, Absorb electrons while minimizing Bremsstrahlung. |
- | Aluminum (1-2 cm) (DO NOT use lead directly for high-energy betas!) |
- | |
- | • Gamma / X-ray High-Z / High Density: Photoelectric & Compton attenuation. High electron|
- | Lead, Tungsten, Concrete density maximizes interaction probability. |
- | |
- | • Neutrons (n⁰) 1. Hydrogenous (HDPE/Water) 1. Moderate fast neutrons via elastic collisions.|
- | 2. Boron-10 / Cadmium 2. Thermal neutron capture. |
- | 3. Lead / Steel Outer Layer 3. Attenuate secondary 2.2 MeV capture gammas. |
- +-------------------------------------------------------------------------------------------------+
- Detailed Shielding Engineering Criteria
Alpha Particle Containment:
Alpha particles have zero skin penetration capability. External shielding walls are never required. Primary controls center entirely on ventilation and containment (HEPA-filtered negative-pressure gloveboxes, chemical fume hoods, respiratory protection) to prevent inhalation/ingestion.
Beta Shielding and Bremsstrahlung Suppression:
When high-energy beta particles (e.g., ⁹⁰Sr/⁹⁰Y with E(β,max) = 2.28 MeV, or ³²P with E(β,max) = 1.71 MeV) strike high-atomic-number (Z) materials such as lead (Z=82), the intense nuclear Coulomb field decelerates the electrons, converting their kinetic energy into Bremsstrahlung X-rays .
The fraction (fbrem) of beta energy converted to Bremsstrahlung is approximated by: f brem ≈ 3.5 × 10 − 4 × Z × E β , max ( or ≈ 10 − 3 × Z × E β ) \mathbf{f_{\text{brem}} \approx 3.5 \times 10^{-4} \times Z \times E_{\beta,\text{max}} \quad (\text{or } \approx 10^{-3} \times Z \times E_\beta)} f brem ≈ 3.5 × 1 0 − 4 × Z × E β , max ( or ≈ 1 0 − 3 × Z × E β )
Engineered Design Rule: Beta shielding must consist of an inner layer of low-Z material (such as 1.0 to 1.5 cm of acrylic/Plexiglass/Lucite, plastic, or aluminum) to absorb all beta particles without Bremsstrahlung production. If significant Bremsstrahlung or trace gamma is present, a thin outer layer of lead may be placed outside the plastic.
Gamma and X-Ray Shielding:
Attenuation depends on mass density (ρ) and atomic number (Z). High-Z materials maximize photoelectric absorption (∝ Z⁴), while high density maximizes Compton electron density.
Radionuclide / Energy Photon Energy (E(γ)) Lead (Z=82, ρ=11.34 g/cm³) HVL Concrete (ρ=2.35 g/cm³) HVL Steel/Iron (Z=26, ρ=7.87 g/cm³) HVL
- Cesium-137 (¹³⁷Cs) 0.662 MeV 0.65 cm (0.25 in) 4.8 cm (1.9 in) 1.6 cm (0.63 in)
- Cobalt-60 (⁶⁰Co) 1.17, 1.33 MeV 1.25 cm (0.49 in) 6.5 cm (2.6 in) 2.2 cm (0.87 in)
- Iridium-192 (¹⁹²Ir) 0.38 MeV (avg) 0.48 cm (0.19 in) 3.8 cm (1.5 in) 1.3 cm (0.51 in)
- Technetium-99m ((99m)Tc) 0.140 MeV 0.027 cm (0.01 in) 1.8 cm (0.71 in) 0.25 cm (0.10 in)
Neutron Shielding (Three-Stage Composite System):
Stage 1: Moderation (Slowing Down): Fast neutrons lose kinetic energy most efficiently through elastic collisions with nuclei of equal mass (Mtarget ≈ Mneutron). By conservation of momentum, maximum energy transfer occurs with Hydrogen (¹H, fractional energy loss per collision ≈ 100%). Materials: Water (H2O), paraffin wax, High-Density Polyethylene (HDPE, (C2H4)n), and borated polyethylene.
Stage 2: Thermal Neutron Capture: Once thermalized (Ek ≈ 0.025 eV), neutrons are absorbed by elements possessing massive thermal neutron capture cross-sections:
Boron-10: ¹⁰B + n → ⁷Li + α + 2.31 MeV (Cross section σ = 3,840 barns).
Cadmium-113: ¹¹³Cd + n → ¹¹⁴Cd + γ (Cross section σ = 20,600 barns).
Stage 3: Secondary Capture Gamma Shielding: Radiative neutron capture in hydrogen (¹H(n, γ)²H) releases an energetic 2.22 MeV capture gamma ray . Therefore, a final outer layer of lead, bismuth, or heavy concrete is required.
3. Gamma Exposure Rate Constants (Γ) and Source Calculations
The exposure rate from an unshielded point gamma source is calculated directly using the Specific Gamma-Ray Constant (Γ) : X ˙ = Γ × A d 2 \mathbf{\dot{X} = \frac{\Gamma \times A}{d^2}} X ˙ = d 2 Γ × A
Where:
- X = Exposure rate (e.g., R/hr or mR/hr)
- Γ = Specific gamma-ray constant (expressed in R·cm²/hr·mCi or R·m²/hr·Ci)
- A = Source activity (in mCi or Ci, matching Γ)
- d = Distance from source to exposure point (in cm or m, matching Γ)
- Gamma-Ray Constants for Common Industrial Radionuclides
- Radionuclide Primary Gamma Energies (E(γ)) Γ (R·cm² / hr·mCi) Γ (R·m² / hr·Ci) Γ (µSv·m² / hr·MBq)
- Cobalt-60 (⁶⁰Co) 1.17, 1.33 MeV 13.0 1.30 0.351
- Cesium-137 (¹³⁷Cs) 0.662 MeV 3.30 0.330 0.089
- Iridium-192 (¹⁹²Ir) 0.30--0.61 MeV 4.80 0.480 0.130
- Radium-226 (²²⁶Ra + daughters, 0.5 mm Pt) Multi-line spectrum 8.25 0.825 0.223
- Iodine-131 (¹³¹I) 0.364 MeV 2.20 0.220 0.059
- Technetium-99m ((99m)Tc) 0.140 MeV 0.76 0.076 0.021
- The 6CEn Rule of Thumb
For quick field estimations of gamma exposure rates from unshielded point sources (valid for photon energies between 0.07 MeV and 2.0 MeV): X ˙ ( R/hr at 1 foot ) ≈ 6 × C × E × n \mathbf{\dot{X} \, (\text{R/hr at 1 foot}) \approx 6 \times C \times E \times n} X ˙ ( R/hr at 1 foot ) ≈ 6 × C × E × n X ˙ ( R/hr at 1 meter ) ≈ 0.5 × C × E × n \mathbf{\dot{X} \, (\text{R/hr at 1 meter}) \approx 0.5 \times C \times E \times n} X ˙ ( R/hr at 1 meter ) ≈ 0.5 × C × E × n
Where:
- C = Source activity in Curies (Ci)
- E = Gamma photon energy in MeV
- n = Number of gamma photons per disintegration (branching fraction)
- 4. Worked Step-by-Step Calculation Examples
- Worked Example 13.3: Distance, Inverse Square Law, and Stay-Time Assessment
Scenario: An unshielded Cesium-137 (¹³⁷Cs, Γ = 0.33 R·m²/(hr·Ci)) radiography source with an activity of 15.0 Ci (555 GBq) is stuck exposed in a valve bay.
Calculate the exposure rate at a distance of 2.0 meters from the source.
Calculate the exposure rate at an exclusion boundary set at 10.0 meters.
An emergency response technician is assigned to manually retract the source. The administrative dose limit for this emergency entry is 100 mrem (1.0 mSv). If the recovery operation requires working at an average distance of 2.0 meters, calculate the maximum permissible stay-time (Tstay) in minutes (assume 1 R ≈ 1 rem).
Solution Steps:
Calculate Exposure Rate at 2.0 meters: X ˙ 1 = Γ × A d 2 = 0.33 R ⋅ m 2 / ( hr ⋅ Ci ) × 15.0 Ci ( 2.0 m ) 2 = 4.95 4.0 = 1.2375 R/hr = 1 , 237.5 mR/hr \dot{X}_1 = \frac{\Gamma \times A}{d^2} = \frac{0.33\text{ R}\cdot\text{m}^2/(\text{hr}\cdot\text{Ci}) \times 15.0\text{ Ci}}{(2.0\text{ m})^2} = \frac{4.95}{4.0} = 1.2375\text{ R/hr} = 1,237.5\text{ mR/hr} X ˙ 1 = d 2 Γ × A = ( 2.0 m ) 2 0.33 R ⋅ m 2 / ( hr ⋅ Ci ) × 15.0 Ci = 4.0 4.95 = 1.2375 R/hr = 1 , 237.5 mR/hr
Calculate Exposure Rate at Exclusion Perimeter (10.0 meters) using Inverse Square Law: X ˙ 2 = X ˙ 1 ( r 1 r 2 ) 2 = 1.2375 R/hr × ( 2.0 m 10.0 m ) 2 = 1.2375 × ( 1 5 ) 2 = 1.2375 25 = 0.0495 R/hr = 49.5 mR/hr \dot{X}_2 = \dot{X}_1 \left(\frac{r_1}{r_2}\right)^2 = 1.2375\text{ R/hr} \times \left(\frac{2.0\text{ m}}{10.0\text{ m}}\right)^2 = 1.2375 \times \left(\frac{1}{5}\right)^2 = \frac{1.2375}{25} = 0.0495\text{ R/hr} = 49.5\text{ mR/hr} X ˙ 2 = X ˙ 1 ( r 2 r 1 ) 2 = 1.2375 R/hr × ( 10.0 m 2.0 m ) 2 = 1.2375 × ( 5 1 ) 2 = 25 1.2375 = 0.0495 R/hr = 49.5 mR/hr
Calculate Maximum Permissible Stay-Time (Tstay) at 2.0 meters: T stay = D limit D ˙ = 100 mrem 1 , 237.5 mrem/hr = 0.0808 hours T_{\text{stay}} = \frac{D_{\text{limit}}}{\dot{D}} = \frac{100\text{ mrem}}{1,237.5\text{ mrem/hr}} = 0.0808\text{ hours} T stay = D ˙ D limit = 1 , 237.5 mrem/hr 100 mrem = 0.0808 hours Stay-Time in minutes = 0.0808 hr × 60 min/hr = 4.85 minutes ≈ 4 minutes, 51 seconds \text{Stay-Time in minutes} = 0.0808\text{ hr} \times 60\text{ min/hr} = 4.85\text{ minutes} \approx 4\text{ minutes, } 51\text{ seconds} Stay-Time in minutes = 0.0808 hr × 60 min/hr = 4.85 minutes ≈ 4 minutes, 51 seconds
Conclusion: The exposure rate at 2.0 m is 1.24 R/hr , the rate at 10.0 m is 49.5 mR/hr , and the technician must complete the recovery in under 4.85 minutes .
Worked Example 13.4: Half-Value Layer (HVL) Shielding Barrier Design
Scenario: A calibration facility houses an unshielded Cobalt-60 (⁶⁰Co) source creating an unshielded dose rate of 320 mR/hr at the operator console. The health physicist establishes an ALARA design target to reduce the operator console dose rate to no more than 5.0 mR/hr.
The Half-Value Layer (HVL) for ⁶⁰Co in lead is 1.25 cm.
The Tenth-Value Layer (TVL) for ⁶⁰Co in concrete is 21.6 cm.
Calculate the required number of Half-Value Layers (n) and the exact thickness of lead required.
Calculate the required thickness of concrete to achieve the same target dose rate using Tenth-Value Layers.
Solution Steps:
Calculate Required Lead Shielding Thickness: I I 0 = ( 1 2 ) n ⟹ 5.0 mR/hr 320 mR/hr = 1 64 = 0.015625 \frac{I}{I_0} = \left(\frac{1}{2}\right)^n \implies \frac{5.0\text{ mR/hr}}{320\text{ mR/hr}} = \frac{1}{64} = 0.015625 I 0 I = ( 2 1 ) n ⟹ 320 mR/hr 5.0 mR/hr = 64 1 = 0.015625 2 n = 64 ⟹ n = 6.0 HVLs ( since 2 6 = 64 ) 2^n = 64 \implies n = 6.0\text{ HVLs} \quad (\text{since } 2^6 = 64) 2 n = 64 ⟹ n = 6.0 HVLs ( since 2 6 = 64 ) Lead Thickness ( x lead ) = n × H V L = 6.0 × 1.25 cm = 7.50 cm ( 2.95 inches ) \text{Lead Thickness } (x_{\text{lead}}) = n \times HVL = 6.0 \times 1.25\text{ cm} = 7.50\text{ cm} \quad (2.95\text{ inches}) Lead Thickness ( x lead ) = n × H V L = 6.0 × 1.25 cm = 7.50 cm ( 2.95 inches )
Calculate Required Concrete Shielding Thickness via TVL: I I 0 = 10 − m ⟹ 5.0 320 = 0.015625 \frac{I}{I_0} = 10^{-m} \implies \frac{5.0}{320} = 0.015625 I 0 I = 1 0 − m ⟹ 320 5.0 = 0.015625 − m = log 10 ( 0.015625 ) = − 1.8062 ⟹ m = 1.8062 TVLs -m = \log_{10}(0.015625) = -1.8062 \implies m = 1.8062\text{ TVLs} − m = lo g 10 ( 0.015625 ) = − 1.8062 ⟹ m = 1.8062 TVLs Concrete Thickness ( x concrete ) = m × T V L = 1.8062 × 21.6 cm = 39.01 cm ( 15.36 inches ) \text{Concrete Thickness } (x_{\text{concrete}}) = m \times TVL = 1.8062 \times 21.6\text{ cm} = 39.01\text{ cm} \quad (15.36\text{ inches}) Concrete Thickness ( x concrete ) = m × T V L = 1.8062 × 21.6 cm = 39.01 cm ( 15.36 inches )
Conclusion: The required barrier is either 7.50 cm (75 mm) of lead or 39.0 cm of solid concrete .