Study guide

12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria

Key Takeaways Explain This Topic AI

Noise dose is the sum of actual exposure time divided by allowable time at each level, expressed as a percentage; 100% dose corresponds to the criterion level for a full shift.

Allowable duration follows T = 8 / 2^((L − Lc)/q), where Lc is the criterion level and q is the exchange rate.

OSHA uses a 90 dBA criterion level, a 5 dB exchange rate, and an 80 dBA threshold for dose accumulation under the hearing conservation amendment; the action level is an 85 dBA TWA.

ACGIH uses an 85 dBA TLV with a 3 dB exchange rate and no threshold, so an ACGIH-configured dosimeter routinely reports a much higher dose than an OSHA-configured one in the same environment.

Last updated: August 2026

Noise Dose Metrics and OSHA versus ACGIH Criteria

Personal noise dosimetry is the primary quantitative exposure assessment method used by industrial hygienists to evaluate worker exposure to fluctuating, intermittent, and continuous sound levels throughout the work shift. Because workplace acoustic environments rarely feature static sound levels, a personal noise dosimeter integrates sound energy over time to calculate a cumulative Noise Dose (%) and an equivalent 8-hour Time-Weighted Average (TWA) .

1. Fundamental Dosimetry Metrics and Mathematical Formulas +-------------------------------------------------------------------------+

  • | CUMULATIVE NOISE DOSE INTEGRATION |
  • +-------------------------------------------------------------------------+
  • | |
  • | Sound Level (dBA) |
  • | 100 | [ Task 2: 95 dBA (C2 = 2 hr) ] |
  • | 90 | [ Task 1: 90 dBA (C1 = 4 hr) ] [ Task 3: 85 dBA (2 hr) ] |
  • | 80 |---|----------------------------------|-----------------------| |
  • | 0 hr 4 hr 6 hr 8 hr|
  • | |
  • | Dose (%) = 100 × [ (C1 / T1) + (C2 / T2) + ... + (Cn / Tn) ] |
  • | |
  • | Where Ti is the reference allowable duration at exposure level Li. |
  • +-------------------------------------------------------------------------+
  • Noise Dose Formula (%)

The Noise Dose (D, expressed as a percentage) represents the ratio of actual exposure time (Ci) spent at a specific sound level (Li) relative to the maximum allowable exposure time (Ti) permitted at that exact level: D = 100 × ∑ i = 1 n ( C i T i ) = 100 × ( C 1 T 1 + C 2 T 2 + ⋯ + C n T n ) D = 100 \times \sum_{i=1}^n \left( \frac{C_i}{T_i} \right) = 100 \times \left( \frac{C_1}{T_1} + \frac{C_2}{T_2} + \dots + \frac{C_n}{T_n} \right) D = 100 × i = 1 ∑ n ​ ( T i ​ C i ​ ​ ) = 100 × ( T 1 ​ C 1 ​ ​ + T 2 ​ C 2 ​ ​ + ⋯ + T n ​ C n ​ ​ )

Where:

Ci = Total duration of exposure at sound level Li (hours).

Ti = Maximum allowable reference duration at sound level Li (hours).

Allowable Exposure Duration Formula (T)

The maximum allowable exposure time (T) for any measured sound level (L) is defined mathematically by the standard's Criterion Level (Lc) , Criterion Duration (Tc = 8 hours) , and Exchange Rate (q) : T = T c 2 ( L − L c q ) = 8 2 ( L − L c q ) T = \frac{T_c}{2^{\left(\frac{L - L_c}{q}\right)}} = \frac{8}{2^{\left(\frac{L - L_c}{q}\right)}} T = 2 ( q L − L c ​ ​ ) T c ​ ​ = 2 ( q L − L c ​ ​ ) 8 ​

OSHA Standard (q = 5 dB, Lc = 90 dBA): T OSHA = 8 2 ( L − 90 5 ) T_{\text{OSHA}} = \frac{8}{2^{\left(\frac{L - 90}{5}\right)}} T OSHA ​ = 2 ( 5 L − 90 ​ ) 8 ​

ACGIH / NIOSH Standard (q = 3 dB, Lc = 85 dBA): T ACGIH = 8 2 ( L − 85 3 ) T_{\text{ACGIH}} = \frac{8}{2^{\left(\frac{L - 85}{3}\right)}} T ACGIH ​ = 2 ( 3 L − 85 ​ ) 8 ​

8-Hour Time-Weighted Average (TWA) Formulas

The 8-hour TWA is the constant sound level that, if experienced continuously over a standard 8-hour shift (Tc = 8 hr), would yield the exact same cumulative noise dose as the actual fluctuating exposures: TWA = q log ⁡ 10 ( 2 ) log ⁡ 10 ( D 100 ) + L c \text{TWA} = \frac{q}{\log_{10}(2)} \log_{10}\left( \frac{D}{100} \right) + L_c TWA = lo g 10 ​ ( 2 ) q ​ lo g 10 ​ ( 100 D ​ ) + L c ​

Because log10(2) ≈ 0.30103:

For OSHA (q = 5 dB, Lc = 90 dBA) : 5/0.30103 = 16.61 TWA OSHA = 16.61 log ⁡ 10 ( D 100 ) + 90 [ dBA ] \mathbf{\text{TWA}_{\text{OSHA}} = 16.61 \log_{10}\left(\frac{D}{100}\right) + 90} \quad [\text{dBA}] TWA OSHA ​ = 16.61 lo g 10 ​ ( 100 D ​ ) + 90 [ dBA ]

For ACGIH / NIOSH (q = 3 dB, Lc = 85 dBA) : 3/0.30103 = 9.966 ≈ 10.0 TWA ACGIH = 10.0 log ⁡ 10 ( D 100 ) + 85 [ dBA ] \mathbf{\text{TWA}_{\text{ACGIH}} = 10.0 \log_{10}\left(\frac{D}{100}\right) + 85} \quad [\text{dBA}] TWA ACGIH ​ = 10.0 lo g 10 ​ ( 100 D ​ ) + 85 [ dBA ]

Equivalent Continuous Sound Level (Leq) vs. Average Sound Level (Lavg)

Leq (Equivalent Continuous Sound Level): The true RMS energy-averaged sound level integrated over the measurement period using a 3 dB exchange rate with no threshold cutoff (0 dB threshold). Leq represents true physical acoustic energy.

Lavg (Average Sound Level): The average sound level integrated over the measurement period using specific instrument parameters (e.g., 5 dB exchange rate, 80 dBA threshold). When q = 5 dB, Lavg = 16.61 log10(D / 100 × 8 / Tsample) + 90.

2. Comparative Matrix: OSHA Regulatory vs. ACGIH Consensus Standards

The table below presents the side-by-side technical parameters governing occupational noise monitoring under OSHA 29 CFR 1910.95 versus ACGIH TLV / NIOSH REL consensus guidelines:

Parameter / Feature OSHA Action Level (Hearing Conservation) OSHA Permissible Exposure Limit (PEL) ACGIH TLV / NIOSH REL (Consensus Standard)

  • Reference Standard 29 CFR 1910.95(c) 29 CFR 1910.95(a),(b) ACGIH TLVs and BEIs / NIOSH Pub 98-126
  • Criterion Level (Lc) 90 dBA (or 85 dBA AL) 90 dBA (8-hr TWA) 85 dBA (8-hr TWA)
  • Dose at Standard Level 50% Dose = 85 dBA TWA 100% Dose = 90 dBA TWA 100% Dose = 85 dBA TWA
  • Exchange Rate (q) 5 dB (Trading Rule) 5 dB (Trading Rule) 3 dB (Equal Energy Rule)
  • Dosimeter Threshold 80 dBA 90 dBA 80 dBA (ACGIH) / None (0 dB, NIOSH)
  • Frequency Weighting A-Weighting (dBA) A-Weighting (dBA) A-Weighting (dBA)
  • Dynamic Time Response Slow Response (τ = 1.0 s) Slow Response (τ = 1.0 s) Slow Response (τ = 1.0 s)
  • Upper Ceiling Limit 115 dBA (max 15 min) 115 dBA (max 15 min) 140 dBC (Peak Ceiling)
  • Peak / Impact Limit 140 dB peak / 140 dBC 140 dB peak / 140 dBC 140 dBC / 140 dBP

Mandatory Actions Hearing Conservation Program, annual audiograms, training, HPD availability Feasible engineering and administrative controls mandatory; HPD enforcement Engineering & administrative controls; strict HCP enforcement +-------------------------------------------------------------------------+

  • | OSHA DUAL-DOSIMETER INTEGRATION SCHEME |
  • +-------------------------------------------------------------------------+
  • | |
  • | Modern IH noise dosimeters run TWO parallel calculation channels: |
  • | |
  • | CHANNEL 1: OSHA Action Level (HCP Compliance) |
  • | - Criterion = 90 dBA, Exchange Rate = 5 dB, Threshold = 80 dBA |
  • | - Evaluates if employee exceeds 50% Dose (85 dBA TWA). |
  • | |
  • | CHANNEL 2: OSHA PEL (Engineering Control Compliance) |
  • | - Criterion = 90 dBA, Exchange Rate = 5 dB, Threshold = 90 dBA |
  • | - Evaluates if employee exceeds 100% Dose (90 dBA TWA). |
  • | - Note: Ignores all noise between 80 and 89.9 dBA! |
  • +-------------------------------------------------------------------------+