Study guide

19.4 Exposure Records Access and Medical Surveillance

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

19.4 Exposure Records Access and Medical Surveillance

Key Takeaways Explain This Topic AI

Under 29 CFR 1910.1020 employee exposure records must be retained 30 years and medical records for the duration of employment plus 30 years; a worker employed less than one year is exempt if the records are given to the employee on termination.

Access must be provided within 15 working days to the employee, a designated representative with written authorisation, and OSHA.

Material safety data sheets and analyses using exposure or medical records are treated as exposure records, and analyses must have personal identifiers removed before release.

Medical surveillance is substance-triggered: the lead, benzene, asbestos, silica, cadmium, and noise standards each specify their own baseline, periodic, and exit examination content and action levels.

Last updated: August 2026

Exposure Records Access and Medical Surveillance

Industrial hygiene programs operate within a rigorous legal and regulatory framework designed to document workplace exposures, track worker health trajectories over multi-decade careers, and ensure transparency. In the United States, the primary federal mandates governing occupational health records, medical surveillance, and injury/illness logging are enforced by the Occupational Safety and Health Administration (OSHA) under 29 CFR 1910.1020 ( Access to Employee Exposure and Medical Records ) and 29 CFR Part 1904 ( Recording and Reporting Occupational Injuries and Illnesses ).

For Certified Industrial Hygienist (CIH) candidates, a thorough mastery of record retention timelines, medical surveillance triggers, Medical Removal Protection ( MRP ), recordability decision logic, the 14 statutory first-aid exemptions, and OSHA inspection/citation contest workflows is essential for board examination success and regulatory management.

1. OSHA 29 CFR 1910.1020: Access to Exposure & Medical Records

Codified under 29 CFR 1910.1020 (and mirrored in construction under 29 CFR 1926.33), this standard grants employees, their designated representatives, and OSHA the legal right to examine and copy relevant exposure and medical records. +-------------------------------------------------------------------------+

  • | OSHA 29 CFR 1910.1020 RECORD RETENTION TIMELINES |
  • +-------------------------------------------------------------------------+
  • | |
  • | [ EMPLOYEE EXPOSURE RECORDS ] -------------> RETENTION: 30 YEARS |
  • | - Personal air sampling & pump logs |
  • | - Noise dosimetry & sound level surveys |
  • | - Dermal wipe samples & radiation dosimetry |
  • | - Master Chemical Inventory / SDS library |
  • | |
  • | [ EMPLOYEE MEDICAL RECORDS ] --------------> RETENTION: DURATION OF |
  • | - Baseline & periodic medical physicals EMPLOYMENT |
  • | - Audiometric testing data & spirometry curves + 30 YEARS |
  • | - Biological monitoring results (blood, urine) |
  • | - Physician's Written Medical Opinions |
  • | |
  • | [ BACKGROUND SAMPLING SHEETS ] ------------> RETENTION: 1 YEAR |
  • | - Raw field calibration sheets, pump run sheets |
  • | (provided summary exposure data are kept 30 yrs) |
  • | |
  • | [ SHORT-TERM EMPLOYEES (< 1 YEAR) ] -------> NO POST-EMPLOYMENT |
  • | - If medical records are handed directly to RETENTION |
  • | the employee upon termination of employment REQUIRED |
  • +-------------------------------------------------------------------------+
  • Core Definitions under 29 CFR 1910.1020

Employee Exposure Record: A record containing information concerning employee exposure to toxic substances or harmful physical agents, including:

Workplace environmental monitoring or measurement (airborne industrial hygiene personal and area sampling, noise surveys, radiation dosimetry, wipe tests);

Biological monitoring results which assess the absorption of a substance (e.g., blood lead level, urinary mandelic acid), excluding routine tests not assessing toxic substance uptake;

Safety Data Sheets (SDSs) indicating that the material may endanger human health; or in the absence of an SDS, a chemical inventory record indicating where and when the chemical was used.

Employee Medical Record: A record concerning the health status of an employee made or maintained by a physician, nurse, or other health care professional, including medical questionnaires, laboratory test results (audiograms, spirometry, blood chemistries), medical opinions, and diagnoses.

Exemptions from Medical Records: Health insurance records maintained separately from employer medical files; voluntary Employee Assistance Program (EAP) records; first-aid records of one-time treatment for minor scratches, burns, or splinters.

Access Protocols & Timelines

Timeline for Access: Whenever an employee or designated representative requests an exposure or medical record, the employer must provide access or a copy within 15 working days . If the employer cannot meet this deadline, they must provide a written explanation stating the delay reason and the earliest date records will be available.

Cost: The employer must provide the first copy of any requested record free of charge .

Designated Representatives: A designated representative (e.g., union representative, attorney, family member) must possess specific written consent from the employee to access medical records. However, designated representatives have the right to access employee exposure records (and chemical inventories) without individual written consent.

OSHA Access: OSHA representatives must be granted immediate access to all exposure and medical records (subject to OSHA Medical Access Order protocols for personally identifiable medical records).

2. Occupational Medical Surveillance & Biological Monitoring

Medical surveillance is the systematic assessment of target employees over time to detect early biological indicators of exposure or subclinical organ damage before irreversible occupational disease develops. +-------------------------------------------------------------------------+

  • | STRUCTURE OF AN IH MEDICAL SURVEILLANCE PROGRAM |
  • +-------------------------------------------------------------------------+
  • | |
  • | [ 1. BASELINE / PRE-PLACEMENT EXAM ] |
  • | - Establishes baseline health, organ function, and biological metrics |
  • | - Baseline audiogram, spirometry, chest X-ray (B-reader), CBC, LFTs |
  • | - Determines medical clearance for respirator use (29 CFR 1910.134) |
  • | | |
  • | v |
  • | [ 2. PERIODIC SURVEILLANCE & BIOLOGICAL MONITORING ] |
  • | - Triggered by exposure > OSHA Action Level (e.g., 30+ days/year) |
  • | - Annual physicals, targeted biological testing (blood/urine BEIs) |
  • | - Compares metrics against baseline to detect clinical trends |
  • | | |
  • | v (If biological threshold exceeded) |
  • | [ 3. MEDICAL REMOVAL PROTECTION (MRP) ] |
  • | - Mandatory temporary reassignment away from exposure zone |
  • | - Full retention of earnings, seniority, and employment benefits |
  • | - Continues until medical return criteria are satisfied |
  • | | |
  • | v |
  • | [ 4. EXIT / TERMINATION MEDICAL EVALUATION ] |
  • | - Final documentation of health status upon departure |
  • | - Provides long-term liability and epidemiological baseline |
  • +-------------------------------------------------------------------------+
  • Regulatory Triggers & Substance-Specific Standards

OSHA expanded health standards mandate medical surveillance when airborne concentrations exceed the Action Level (AL) (typically 50% of the Permissible Exposure Limit [PEL]) for a specified frequency (often ≥ 30 days/year):

Substance OSHA Action Level (AL) OSHA PEL Medical Surveillance Triggers & Biomarkers Medical Removal Protection (MRP) Triggers

Lead (General Industry) (1910.1025) 30 µg/m³ (8-hr TWA) 50 µg/m³ Blood lead level (BLL) & ZPP monitoring every 6 mos (every 2 mos if BLL ≥ 40 µg/dL). BLL ≥ 60 µg/dL (or avg of last 3 tests ≥ 50 µg/dL). Return when BLL < 40 µg/dL.

Lead (Construction) (1926.62) 30 µg/m³ (8-hr TWA) 50 µg/m³ Initial BLL/ZPP monitoring; periodic testing every 2 months for elevated BLL. BLL ≥ 50 µg/dL. Return when two consecutive tests show BLL < 40 µg/dL.

Respirable Crystalline Silica (1910.1053) 25 µg/m³ (8-hr TWA) 50 µg/m³ Mandatory if exposed ≥ AL for ≥ 30 days/year. Exam every 3 yrs: Chest X-ray (ILO/B-reader), Spirometry (FVC, FEV1), TB test. Physician's written recommendation for limitation or removal from silica exposure.

Benzene (1910.1028) 0.5 ppm (8-hr TWA) 1.0 ppm (STEL 5.0 ppm) Mandatory if exposed ≥ AL for ≥ 30 days/year. Baseline and annual Complete Blood Count (CBC) with differential. Abnormal hematological profile (e.g., persistent cytopenia); removal pending hematologist evaluation.

Asbestos (1910.1001) 0.1 f/cc (8-hr TWA) 0.1 f/cc (Excursion 1.0 f/cc) Exposed at/above AL for ≥ 30 days/year or wearing negative-pressure respirator. Chest X-ray, Spirometry (FVC, FEV1). Physician's written recommendation based on pulmonary impairment or inability to wear respirator.

Methylene Chloride (1910.1052) 12.5 ppm (8-hr TWA) 25 ppm (STEL 125 ppm) Exposed at/above AL ≥ 30 days/year or PEL ≥ 10 days/year. Physical exam, liver function, cardiac/CNS review. Medical removal if health care professional identifies adverse health effects or hepatic/cardiac impairment.

The Physician's Written Medical Opinion (PWMO)

To protect worker privacy, OSHA standards strictly regulate what medical information an employer is permitted to receive:

What the Employer Receives: The Physician's Written Medical Opinion contains ONLY:

The physician's determination of whether the employee has any detected medical conditions that place them at increased risk of impairment from exposure;

Any recommended limitations on the employee's exposure or on the use of personal protective equipment (e.g., respirator restrictions);

A statement that the employee has been informed by the physician of the results of the medical examination and any medical conditions requiring follow-up.

What Remains Confidential: Specific findings, clinical laboratory numerical values (outside explicit regulatory biological triggers like BLL), personal medical history, and unrelated diagnoses must not be revealed to the employer.