Study guide

9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules

Key Takeaways Explain This Topic AI

Six label elements are mandatory: product identifier, signal word, hazard statement(s), pictogram(s), precautionary statement(s), and supplier identification.

Only two signal words exist — DANGER for the more severe categories and WARNING for the less severe — and only one may appear on a label.

The safety data sheet has a fixed 16-section order; OSHA does not enforce sections 12 through 15 (ecological, disposal, transport, regulatory) because they fall outside its jurisdiction.

Trade secret protection permits withholding the specific chemical identity from the SDS, but the identity must be released immediately to treating physicians and nurses in a medical emergency.

Last updated: August 2026

GHS Labels, Safety Data Sheets, and Trade Secret Rules

Classification determines what a chemical is ; labelling and the safety data sheet determine what a worker is told . OSHA prescribes both the required label elements and the fixed 16-section SDS order, and exam items routinely test whether a specific piece of information belongs on the label, in a numbered SDS section, or neither.

1. Mandatory GHS Container Label Elements

Under 29 CFR 1910.1200(f), manufacturers, importers, and distributors must ensure that every container of hazardous chemicals leaving the workplace is labeled with six mandatory elements : +-------------------------------------------------------------------------+

  • | STANDARDIZED GHS SHIPPED CONTAINER LABEL |
  • +-------------------------------------------------------------------------+
  • | [1] PRODUCT IDENTIFIER: Acetone Technical Grade, UN 1090 |
  • | |
  • | [2] SIGNAL WORD: DANGER |
  • | |
  • | [3] HAZARD STATEMENTS: |
  • | - H225: Highly flammable liquid and vapor. |
  • | - H319: Causes serious eye irritation. |
  • | - H336: May cause drowsiness or dizziness. |
  • | |
  • | [4] PRECAUTIONARY STATEMENTS: |
  • | - P210: Keep away from heat, hot surfaces, sparks, open flames. |
  • | - P280: Wear protective gloves/eye protection/face protection. |
  • | - P305+P351+P338: IF IN EYES: Rinse cautiously with water... |
  • | - P403+P235: Store in a well-ventilated place. Keep cool. |
  • | - P501: Dispose of contents/container in accordance with regs. |
  • | |
  • | [5] GHS PICTOGRAMS: [6] SUPPLIER IDENTIFICATION: |
  • | +-------+ +-------+ Industrial Chemical Supply Corp. |
  • | | Flame | | Excl. | 1000 Solvents Way, Austin, TX |
  • | | | | Mark | Emergency Phone: (800) 424-9300 |
  • | +-------+ +-------+ |
  • +-------------------------------------------------------------------------+
  • The 6 Core Label Components Explained

Product Identifier: The chemical name, code number, or batch identifier that matches the exact identifier used on the SDS (Section 1) and master chemical inventory.

Signal Word: A single word used to indicate the relative severity of the hazard:

"DANGER": Used for more severe hazard categories (e.g., Acute Toxicity Cat 1–2, Flammable Liquid Cat 1–2, Carcinogen Cat 1A–1B).

"WARNING": Used for less severe hazard categories (e.g., Acute Toxicity Cat 4, Flammable Liquid Cat 3–4, Skin Irritation Cat 2).

Precedence Rule: If "Danger" applies, "Warning" must not appear on the label.

Hazard Statements (H-Codes): Standardized phrases assigned to a hazard class and category describing the nature of the hazard (e.g., H300: Fatal if swallowed , H350: May cause cancer ).

Precautionary Statements (P-Codes): Standardized phrases describing recommended measures to minimize or prevent adverse effects from exposure, handling, or improper storage. Divided into four functional categories:

Prevention (P2xx): e.g., P260: Do not breathe dust/fume/gas/mist/vapors.

Response (P3xx): e.g., P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.

Storage (P4xx): e.g., P405: Store locked up.

Disposal (P5xx): e.g., P501: Dispose of contents in accordance with local regulations.

Supplier Identification: The name, physical address, and emergency telephone number of the chemical manufacturer, importer, or responsible party.

GHS Pictograms: Diamond-shaped symbols with a black hazard glyph, white background, and red border (set on a point).

The 9 Standard GHS Pictograms

Pictogram Name Symbol Appearance Hazards Represented

Health Hazard Exploding chest / silhouette Carcinogen, Mutagenicity, Reproductive Toxicity, Respiratory Sensitizer, STOT-SE 1–2, STOT-RE 1–2, Aspiration Hazard

Flame Burning flame Flammables, Pyrophorics, Self-Heating, Emits Flammable Gas, Self-Reactives, Organic Peroxides

Exclamation Mark Bold exclamation point Irritant (skin/eye), Skin Sensitizer, Acute Toxicity (Cat 4), STOT-SE 3 (narcotic / respiratory), Hazardous to Ozone Layer

Gas Cylinder Gas cylinder bottle Gases Under Pressure (Compressed, Liquefied, Dissolved, Refrigerated)

Corrosion Liquid pouring on hands & steel Skin Corrosion (Cat 1A–1C), Serious Eye Damage (Cat 1), Corrosive to Metals

  • Exploding Bomb Exploding mass Explosives, Self-Reactives (Type A–B), Organic Peroxides (Type A–B)
  • Flame Over Circle Flame resting on a circle ("O") Oxidizing Gases, Oxidizing Liquids, Oxidizing Solids

Skull and Crossbones Skull with crossed bones Acute Toxicity (Fatal or Toxic: Oral, Dermal, Inhalation Categories 1, 2, 3)

Environment (Non-mandatory for OSHA) Dead tree and dead fish Aquatic Toxicity (Acute 1, Chronic 1–2). Enforced by EPA, not OSHA. +-------------------------------------------------------------------------+

  • | SUMMARY OF GHS PICTOGRAM SYMBOLS |
  • +-------------------------------------------------------------------------+
  • | |
  • | [ HEALTH HAZARD ] [ FLAME ] [ EXCLAMATION MARK ] |
  • | - Carcinogen - Flammable Liquid/Gas - Acute Toxicity Cat 4 |
  • | - Mutagen - Pyrophoric - Skin/Eye Irritant |
  • | - Repro Toxicant - Self-Heating - Skin Sensitizer |
  • | - Resp Sensitizer - Organic Peroxide - STOT-SE Cat 3 |
  • | |
  • | [ CORROSION ] [ GAS CYLINDER ] [ SKULL & CROSSBONES ] |
  • | - Skin Burns (Cat 1) - Compressed Gas - Acute Toxicity Cat 1-3|
  • | - Eye Damage (Cat 1) - Liquefied Gas - Fatal / Toxic Ingest, |
  • | - Corrosive to Metal - Cryogenic Gas Dermal, Inhalation |
  • | |
  • | [ FLAME OVER CIRCLE ] [ EXPLODING BOMB ] [ ENVIRONMENT ] |
  • | - Oxidizing Liquids - Unstable Explosive - Aquatic Toxicity |
  • | - Oxidizing Solids - Self-Reactive A/B - Non-Mandatory |
  • | - Oxidizing Gases - Organic Peroxide A/B under OSHA |
  • +-------------------------------------------------------------------------+
  • 2. Standardized 16-Section Safety Data Sheet (SDS) Layout

Under 29 CFR 1910.1200(g), manufacturers and importers must provide an SDS for each hazardous chemical. The document must strictly adhere to the 16-section standardized format in the exact sequential order prescribed by GHS. OSHA enforces compliance with Sections 1 through 11 and Section 16 ; Sections 12 through 15 handle matters outside OSHA's statutory jurisdiction (governed instead by EPA and DOT):

Section # Section Title Mandatory OSHA Content & Regulatory Scope

Section 1 Identification Product identifier, manufacturer/distributor name, address, phone, emergency phone, recommended uses, and restrictions.

Section 2 Hazard(s) Identification GHS hazard classification, signal word, hazard statements, precautionary statements, pictograms, and hazards not otherwise classified (HNOC).

Section 3 Composition / Ingredients Chemical identity, common names/synonyms, CAS number, concentration (exact percentage or claimed trade secret concentration ranges).

Section 4 First-Aid Measures Initial care by route of exposure (inhalation, skin, eye, ingestion), acute/delayed symptoms, and immediate medical attention needs.

Section 5 Fire-Fighting Measures Suitable/unsuitable extinguishing media, specific chemical fire hazards (hazardous combustion products), protective equipment for firefighters.

Section 6 Accidental Release Measures Personal precautions, PPE, emergency procedures, environmental containment, cleanup methods (absorbents, neutralizers).

Section 7 Handling and Storage Safe handling precautions, incompatible chemical storage conditions, hygiene practices, ventilation requirements.

Section 8 Exposure Controls / Personal Protection OSHA PELs, ACGIH TLVs, NIOSH RELs, biological exposure indices (BEIs), engineering controls (LEV), and PPE specifications (respirators, gloves).

Section 9 Physical and Chemical Properties Appearance, odor, odor threshold, pH, melting/boiling point, flash point, evaporation rate, flammability limits (LEL/UEL), vapor pressure, vapor density, relative density, solubility, octanol-water partition coefficient (log Kow), autoignition temperature, and viscosity.

Section 10 Stability and Reactivity Chemical stability, reactivity hazards, hazardous decomposition products, incompatible materials, conditions to avoid (heat, shock).

Section 11 Toxicological Information Routes of entry, acute and chronic health effects, numeric toxicity measures (LD50/LC50), epidemiological data, IARC/NTP/OSHA carcinogen status.

Section 12 Ecological Information Non-Mandatory for OSHA (EPA): Ecotoxicity, persistence and degradability, bioaccumulative potential (BCF), mobility in soil.

Section 13 Disposal Considerations Non-Mandatory for OSHA (EPA RCRA): Waste characterization, hazardous waste numbers, safe disposal and container handling.

Section 14 Transport Information Non-Mandatory for OSHA (DOT): UN number, proper shipping name, hazard class, packing group (PG I, II, III), marine pollutant status.

Section 15 Regulatory Information Non-Mandatory for OSHA (EPA/TSCA/SARA): SARA Title III 302/313, CERCLA reportable quantities, TSCA inventory, California Proposition 65.

Section 16 Other Information Date of SDS preparation, last revision date, NFPA 704 / HMIS ratings, key/legend to abbreviations.

3. Trade Secrets and Emergency Medical Disclosure Rules

Under 29 CFR 1910.1200(i), chemical manufacturers, importers, or employers may withhold the specific chemical identity (chemical name, CAS number) or the exact percentage concentration of a substance from an SDS, provided they can support that the information is a bona fide trade secret .

Rules for Withholding Information

The claim that the information is withheld as a trade secret must be explicitly stated in Section 3 of the SDS.

The SDS must disclose all physical and health properties, toxicological effects, and required precautions, even if the specific chemical name is withheld.

Emergency Medical Disclosure (29 CFR 1910.1200(i)(2))

Where a treating physician or nurse determines that a medical emergency exists and the specific chemical identity of a trade secret chemical is necessary for emergency or first-aid treatment, the chemical manufacturer, importer, or employer MUST immediately disclose the specific chemical identity to that physician or nurse.

No Advance Written Agreement Required: The manufacturer cannot delay disclosure to demand a written confidentiality agreement or statement of need prior to release.

Post-Emergency Follow-up: The manufacturer may require the treating physician or nurse to provide a written statement of need and a confidentiality agreement as soon as circumstances permit after the emergency has stabilized .

Non-Emergency Disclosure (29 CFR 1910.1200(i)(3))

In non-emergency industrial hygiene or occupational health scenarios (e.g., assessing health risks, designing local exhaust ventilation, conducting biological monitoring, establishing medical surveillance):

The health professional (IH, toxicologist, physician) must submit a written request detailing the specific occupational health need.

The request must explain why alternative non-confidential information is insufficient.

The health professional must sign a written confidentiality agreement agreeing not to use the trade secret for any purpose other than the health need.

If the employer refuses disclosure, the dispute may be referred to the OSHA Area Director for evaluation and citation.

  • 4. Worked Step-by-Step Classification Examples
  • Worked Example 8.1.1: Multi-Endpoint Health Hazard Classification & Label Specification

Problem: An industrial formulation facility blends a liquid solvent mixture. Laboratory toxicological bioassays and physical testing yield the following empirical data:

  • Oral LD50 (rat): 180 mg/kg
  • Inhalation LC50 (rat, 4-hour vapor): 3.2 mg/L

Skin contact (rabbit, 4-hour occluded patch): Reversible erythema and edema (mean Draize score 2.8), completely clearing at Day 10.

Flash Point: 28°C (closed cup); Initial Boiling Point: 110°C.

Ames Test: Negative; No evidence of carcinogenicity or reproductive toxicity.

Determine:

The GHS hazard classifications for acute oral toxicity, acute inhalation toxicity, skin irritation, and flammability.

The assigned Signal Word for the shipped label.

The mandatory GHS Pictograms required on the container label.

Solution Steps:

Evaluate Acute Oral Toxicity:

Experimental value: LD50 = 180 mg/kg.

Cutoff criteria: Category 3 is > 50 to ≤ 300 mg/kg.

Classification: Acute Toxicity (Oral) — Category 3 (Signal Word: Danger; Pictogram: Skull and Crossbones; Statement: H301: Toxic if swallowed ).

Evaluate Acute Inhalation Toxicity (Vapor):

Experimental value: LC50 = 3.2 mg/L (4-hour vapor).

Cutoff criteria: Category 3 vapor is > 2.0 to ≤ 10.0 mg/L.

Classification: Acute Toxicity (Inhalation: Vapor) — Category 3 (Signal Word: Danger; Pictogram: Skull and Crossbones; Statement: H331: Toxic if inhaled ).

Evaluate Skin Irritation / Corrosion:

Observations: Reversible tissue irritation clearing at Day 10 (mean score 2.8 ≥ 2.3), no full-thickness dermal necrosis.

Classification: Skin Corrosion/Irritation — Category 2 (Skin Irritation) (Signal Word: Warning; Pictogram: Exclamation Mark; Statement: H315: Causes skin irritation ).

Evaluate Flammability:

Flash Point = 28°C (≥ 23°C and ≤ 60°C).

Classification: Flammable Liquid — Category 3 (Signal Word: Warning; Pictogram: Flame; Statement: H226: Flammable liquid and vapor ).

Determine the Overall Shipped Label Signal Word:

Acute Oral Cat 3 requires "Danger". Acute Inhalation Cat 3 requires "Danger". Skin Irritation Cat 2 and Flammable Liquid Cat 3 require "Warning".

Rule: When both "Danger" and "Warning" apply, "Danger" takes precedence and "Warning" must not appear.

Assigned Signal Word: DANGER .

Determine Required Label Pictograms:

  • Skull and Crossbones (for Acute Oral Cat 3 and Inhalation Cat 3)
  • Flame (for Flammable Liquid Cat 3)
  • Exclamation Mark (for Skin Irritation Cat 2)

Note on Precedence: GHS rules dictate that when Skull and Crossbones is present, the Exclamation Mark is omitted if used for acute toxicity , but it is retained for skin irritation (Cat 2) .

Required Pictograms: Skull and Crossbones, Flame, Exclamation Mark .

Worked Example 8.1.2: Flammable Liquid Category & Precautionary Profile Determination

Problem: A chemical manufacturing process utilizes a volatile raw solvent with a measured closed-cup Flash Point of 18°C (64.4°F) and an Initial Boiling Point of 32°C (89.6°F).

Classify the liquid into the appropriate GHS flammable liquid category.

State the required GHS Signal Word and Hazard Statement.

List the core standard Precautionary Statements across Prevention, Storage, and Disposal.

Solution Steps:

Evaluate Category Cutoffs:

Flash Point = 18°C < 23°C.

Initial Boiling Point = 32°C ≤ 35°C.

Under 29 CFR 1910.1200 Appendix B.6, a liquid with FP < 23°C and BP ≤ 35°C meets the criteria for Category 1 .

(Note: If Boiling Point were > 35°C, it would be Category 2).

Determine Signal Word and Hazard Statement:

Classification: Flammable Liquid — Category 1 .

Signal Word: DANGER .

Hazard Statement: H224: Extremely flammable liquid and vapor .

Assign Core Precautionary Statements:

Prevention (P2xx):

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P233: Keep container tightly closed.

P240: Ground and bond container and receiving equipment.

P241: Use explosion-proof electrical/ventilating/lighting equipment.

P280: Wear protective gloves/protective clothing/eye protection/face protection.

Storage (P4xx):

P403+P235: Store in a well-ventilated place. Keep cool.

Disposal (P5xx):

P501: Dispose of contents/container in accordance with local/regional/national/international regulations.