Study guide

9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups

Key Takeaways Explain This Topic AI

The AIHA strategy is a cycle: basic characterisation, exposure assessment, further information gathering, health hazard control, and reassessment — not a one-time survey.

Basic characterisation collects the workplace, workforce, and environmental agent information — processes, materials, controls, tasks, work practices, and existing data — before any judgement is made.

A similar exposure group is a set of workers whose agent, task, and control profile is close enough that a sample from one member represents the whole group; SEGs are defined by process and task, not by job title alone.

Misclassified SEGs are the dominant source of error: a heterogeneous group produces a high GSD and a monitoring result that represents nobody.

Last updated: August 2026

The AIHA Exposure Assessment Strategy and Similar Exposure Groups

Comprehensive worker health protection requires an occupational hygiene strategy that systematically identifies, evaluates, and controls chemical, physical, and biological exposures across an entire enterprise. Because resources and time prohibit monitoring every individual worker for every possible contaminant on every shift, the industrial hygiene profession relies on the AIHA Exposure Assessment Strategy ( A Strategy for Assessing and Managing Occupational Exposures , American Industrial Hygiene Association).

Central to this strategy is the formation and characterization of Similar Exposure Groups (SEGs) and the application of qualitative exposure assessment models . Qualitative profiling allows the Industrial Hygienist (IH) to rank workplace risks, allocate quantitative air sampling resources effectively, establish baseline exposure profiles, and ensure ongoing compliance.

1. The AIHA Exposure Assessment Strategy Framework

The AIHA strategy is an iterative, closed-loop management framework designed to achieve continuous occupational exposure control: +-------------------------------------------------------------------------+

  • | AIHA EXPOSURE ASSESSMENT MANAGEMENT CYCLE |
  • +-------------------------------------------------------------------------+
  • | |
  • | +------------------------------+ |
  • | | BASIC CHARACTERIZATION | |
  • | | Workplace, Workforce, Env. | |
  • | +--------------+---------------+ |
  • | | |
  • | v |
  • | +------------------------------+ |
  • | | ESTABLISH SEGs | |
  • | | Process, Task, Job, Location | |
  • | +--------------+---------------+ |
  • | | |
  • | v |
  • | +------------------------------+ |
  • | | QUALITATIVE RISK PROFILING | |
  • | | Hazard Rating x Exp. Rating | |
  • | +--------------+---------------+ |
  • | | |
  • | v |
  • | +------------------------------+ |
  • | | QUANTITATIVE MONITORING | |
  • | | Baseline Sampling (n=6-10) | |
  • | +--------------+---------------+ |
  • | | |
  • | v |
  • | +------------------------------+ |
  • | | RISK CHARACTERIZATION | |
  • | | Acceptable / Unacceptable / ?| |
  • | +--------------+---------------+ |
  • | | |
  • | v |
  • | +------------------------------+ |
  • | | PERIODIC REASSESSMENT | |
  • | | Management of Change (MOC) | |
  • | +--------------+---------------+ |
  • | | |
  • | +--- (Continuous Feedback Loop) ----> |
  • | |
  • +-------------------------------------------------------------------------+
  • The Six Core Steps of the Strategy

Basic Characterization: Gathering comprehensive data regarding the physical facility, workforce demographics, operational processes, raw materials, chemical reaction intermediates, environmental conditions, and installed engineering controls.

Establish Similar Exposure Groups (SEGs): Grouping workers who share common exposure profiles into manageable, representative units.

Information Gathering & Qualitative Profiling: Assessing the toxicological hazard (Hazard Rating, HR) and potential for airborne release and contact (Exposure Rating, ER) to compute a Risk Priority Rank for each SEG.

Quantitative Monitoring (Air Sampling & Biomonitoring): Collecting rigorous, statistically sound exposure measurements (n = 6 to 10 samples per SEG) to test qualitative assumptions and establish baseline statistics.

Risk Characterization & Decision Making: Comparing measured or modeled exposures against Occupational Exposure Limits (OELs) to determine whether exposures are acceptable, unacceptable, or uncertain.

Periodic Reassessment & Management of Change: Re-evaluating SEGs on scheduled audit intervals or immediately following operational modifications.

2. Step 1: Basic Characterization

Basic characterization provides the contextual foundation upon which all exposure decisions are made. The IH systematically audits four operational dimensions: +-------------------------------------------------------------------------+

  • | FOUR PILLARS OF BASIC CHARACTERIZATION |
  • +-------------------------------------------------------------------------+
  • | |
  • | 1. WORKPLACE 2. WORKFORCE |
  • | - Building dimensions - Job titles & headcount |
  • | - Air exchange rate (ACH) - Shift length (8-hr vs 12-hr) |
  • | - General HVAC layout - Task rotation schedule |
  • | - Local climate / seasons - Worker work practices & training |
  • | |
  • | 3. ENVIRONMENTAL AGENTS 4. PROCESSES & CONTROLS |
  • | - Physical state (gas/dust) - Open vs closed operations |
  • | - Vapor pressure (P°) - Operating temperature & pressure |
  • | - Evaporation rate - Local Exhaust Ventilation (LEV hoods) |
  • | - Particle size distribution- Administrative controls & PPE |
  • +-------------------------------------------------------------------------+
  • Physical-Chemical Parameters Influencing Vapor Generation

Vapor Pressure (P°): The pressure exerted by a vapor in thermodynamic equilibrium with its liquid phase at a given temperature. High vapor pressure (P° > 10 mmHg at 20°C) indicates high volatility and rapid atmospheric emission.

Boiling Point (Tbp): Liquids with low boiling points generate high vapor concentrations under ambient conditions.

Process Operating Temperature (Top): If a process operates at elevated temperatures (Top > Tambient), the effective vapor pressure increases exponentially according to the Clausius-Clapeyron equation : ln ⁡ ( P 2 ∘ P 1 ∘ ) = − Δ H v a p R ( 1 T 2 − 1 T 1 ) \ln\left(\frac{P_2^\circ}{P_1^\circ}\right) = -\frac{\Delta H_{vap}}{R} \left(\frac{1}{T_2} - \frac{1}{T_1}\right) ln ( P 1 ∘ ​ P 2 ∘ ​ ​ ) = − R Δ H v a p ​ ​ ( T 2 ​ 1 ​ − T 1 ​ 1 ​ )

Dustiness (Friability / Particle Dispersibility): For solid materials, the propensity of particles to become airborne during handling. Fine powders (< 10 µm) possess vastly higher aerosolization potential than coarse granular pellets or pastilles.

3. Step 2: Establishing Similar Exposure Groups (SEGs)

A Similar Exposure Group (SEG) is defined as a group of workers who have the same general exposure profile for the chemical or physical agent(s) being evaluated because of the similarity and frequency of the tasks performed, the materials and processes with which they work, and the similarity of the way they perform those tasks.

Approaches to SEG Formation

Process-Based Grouping: Workers assigned to a specific, continuous industrial unit process (e.g., fluid catalytic cracking operators, continuous galvanizing line technicians). Excellent for continuous chemical manufacturing.

Task-Based Grouping: Workers who perform specific, discrete, intermittent tasks with high release potential, regardless of department (e.g., solvent parts washing, manual bulk bag dumping, filter press cake removal). Highly effective for capturing peak short-term exposures.

Job-Title / Departmental Grouping: Grouping workers strictly by administrative job descriptions (e.g., "Maintenance Mechanic B"). Caution: Job titles often encompass widely divergent tasks; this approach must be verified for actual exposure similarity.

Environmental / Geographic Grouping: Grouping workers based on shared physical work zones (e.g., control room operators, tank farm outside operators, warehouse forklift drivers).

Observational vs. Statistical SEG Validation

Observational Approach: The IH groups workers based on professional judgment, walk-through surveys, and process knowledge.

Statistical Homogeneity Validation: Once quantitative baseline monitoring data (n ≥ 6) are collected, the IH calculates the Geometric Standard Deviation (GSD) of the lognormal exposure distribution: G S D = e s y = exp ⁡ ( ∑ ( ln ⁡ X i − y ˉ ) 2 n − 1 ) GSD = e^{s_y} = \exp\left(\sqrt{\frac{\sum (\ln X_i - \bar{y})^2}{n-1}}\right) GS D = e s y ​ = exp ( n − 1 ∑ ( ln X i ​ − y ˉ ​ ) 2 ​ ​ )

True Homogeneous SEG: A GSD ≤ 2.0 to 2.5 indicates that within-group and between-worker exposures are tightly clustered, confirming a valid SEG.

Heterogeneous Group (GSD > 3.0): Indicates substantial variability among workers or shifts. The IH must split the group into distinct sub-SEGs based on specific task differences, work practices, or micro-environments.