Study guide

9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix

Key Takeaways Explain This Topic AI

Qualitative exposure judgements combine an estimated exposure rating with the OEL and a confidence rating, producing an acceptable, uncertain, or unacceptable classification without sampling.

The AIHA exposure rating categories run 0 to 4 against fractions of the OEL, with category 3 (50 to 100% of the OEL) and category 4 (above the OEL) requiring action.

The risk matrix crosses the exposure rating with a health effect severity rating, so a low-exposure/high-severity combination can outrank a higher exposure with a mild endpoint.

Management of change triggers reassessment: new materials, process modification, control changes, production rate changes, new tasks, or a health complaint all invalidate a prior judgement.

Last updated: August 2026

Qualitative Exposure Profiling and the AIHA Risk Matrix

Once the workplace is characterised and grouped, each similar exposure group must be given an exposure judgement. Most of those judgements are made qualitatively, before any pump is deployed, and the AIHA risk matrix is what converts them into a prioritised action list.

1. Step 3: Qualitative Hazard and Exposure Profiling

When quantitative sampling data are not yet available, the IH conducts a semi-quantitative risk ranking by assigning a Hazard Rating (HR) and an Exposure Rating (ER) to each SEG.

4.1 Hazard Rating (HR 1 to 4) Scale

The Hazard Rating reflects the intrinsic toxicological potency of the chemical agent, based on published Occupational Exposure Limits (OELs, TLVs, PELs), toxicological endpoints, and GHS classifications:

Hazard Rating Toxicity Level Benchmark OEL Criteria Health Effect Endpoints / GHS Classes

HR 1 Minor / Nuisance OEL > 100 ppm or > 10 mg/m³ Transient mild sensory irritation; reversible effects; nuisance particulates.

HR 2 Moderate OEL 10--100 ppm or 1--10 mg/m³ Moderate reversible organ toxicity; significant skin/eye irritant; CNS depression (STOT-SE 3).

HR 3 High OEL 1--10 ppm or 0.1--1 mg/m³ Severe irreversible organ damage; skin/respiratory sensitizers; corrosives; STOT-RE 1–2.

HR 4 Extreme / Critical OEL < 1 ppm or < 0.1 mg/m³ Known/suspected human carcinogens (IARC 1/2A, ACGIH A1/A2); germ cell mutagens; reproductive toxicants.

4.2 Exposure Rating (ER 1 to 4) Scale

The Exposure Rating estimates the magnitude, frequency, and duration of worker contact with the airborne agent, integrating volatility, handling mass, and engineering control efficiency: Exposure Potential ∝ Volatility / Dustiness × Quantity Handled × Duration Confinement × Ventilation Efficiency \text{Exposure Potential} \propto \frac{\text{Volatility / Dustiness} \times \text{Quantity Handled} \times \text{Duration}}{\text{Confinement} \times \text{Ventilation Efficiency}} Exposure Potential ∝ Confinement × Ventilation Efficiency Volatility / Dustiness × Quantity Handled × Duration ​

Exposure Rating Exposure Potential Estimated Workplace Concentration Operational & Control Characteristics

ER 1 Low / De Minimis < 10% of OEL Fully enclosed, automated process; high-efficiency LEV; tiny quantities (< 1 kg/L); task duration < 15 min/shift.

ER 2 Moderate 10% to 50% of OEL Semi-enclosed process; standard LEV capture hoods; moderate quantities (1--100 kg/L); task duration 15 min to 2 hr/shift.

ER 3 High 50% to 100% of OEL Open manual handling; general dilution ventilation only; large quantities (100--1000 kg/L); prolonged duration (2--6 hr/shift).

ER 4 Very High / Extreme > 100% of OEL Open pouring, manual spraying, or elevated temperature operations; poor/no ventilation; > 1000 kg/L; continuous full-shift exposure (> 6 hr).

2. The AIHA Exposure Risk Matrix & Prioritization

By cross-tabulating the Hazard Rating (HR) and Exposure Rating (ER), the IH calculates the Risk Priority Rank : Risk Priority Rank = Hazard Rating (HR) × Exposure Rating (ER) \mathbf{\text{Risk Priority Rank} = \text{Hazard Rating (HR)} \times \text{Exposure Rating (ER)}} Risk Priority Rank = Hazard Rating (HR) × Exposure Rating (ER) +-------------------------------------------------------------------------+

  • | AIHA 4x4 EXPOSURE RISK MATRIX |
  • +-------------------------------------------------------------------------+
  • | Hazard Rating |
  • | (Toxicity) |
  • | ^ |
  • | | |
  • | 4 | Cat 2 (4) Cat 3 (8) Cat 4 (12) Cat 4 (16) |
  • | | [Medium] [High] [CRITICAL] [CRITICAL] |
  • | | |
  • | 3 | Cat 2 (3) Cat 3 (6) Cat 3 (9) Cat 4 (12) |
  • | | [Medium] [High] [High] [CRITICAL] |
  • | | |
  • | 2 | Cat 1 (2) Cat 2 (4) Cat 3 (6) Cat 3 (8) |
  • | | [Low] [Medium] [High] [High] |
  • | | |
  • | 1 | Cat 1 (1) Cat 1 (2) Cat 2 (3) Cat 2 (4) |
  • | | [Low] [Low] [Medium] [Medium] |
  • | +-------------------------------------------------------------> |
  • | ER 1 ER 2 ER 3 ER 4 |
  • | (<10% OEL) (10-50% OEL) (50-100% OEL) (>100% OEL) |
  • | |
  • | Exposure Rating |
  • +-------------------------------------------------------------------------+
  • Prioritization Categories and Action Protocols

Risk Category Matrix Rank (HR × ER) Risk Level Action & Monitoring Priority Protocol

Category 4 12 to 16 Critical / Unacceptable Immediate Intervention: Implement interim engineering controls, PPE, or process shutdown. High-priority quantitative air sampling required immediately to verify control efficacy. Re-audit monthly/continuously.

Category 3 6 to 9 High Priority Priority Monitoring: Schedule baseline quantitative air sampling (n = 6 to 10 full-shift personal samples). Evaluate LEV capture velocity. Re-audit annually.

Category 2 3 to 4 Moderate / Medium Routine Baseline: Acceptable under current controls; schedule routine baseline air monitoring (n = 3 to 6 samples) when higher categories are controlled. Re-audit every 2 years.

Category 1 1 to 2 Low / De Minimis Exposures Acceptable: No quantitative air monitoring required unless processes change. Maintain existing general controls. Re-audit every 3 years.

3. SEG Management of Change (MOC) and Reassessment Triggers

Qualitative and quantitative exposure assessments represent a point-in-time snapshot. An industrial hygiene program must be linked to the facility's Management of Change (MOC) protocol to trigger exposure reassessments. +-------------------------------------------------------------------------+

  • | MANAGEMENT OF CHANGE (MOC) TRIGGERS |
  • +-------------------------------------------------------------------------+
  • | |
  • | RAW MATERIAL SUBSTITUTION ---> Solvent changes, purity adjustments |
  • | PROCESS EQUIPMENT MODS ---> Higher throughput, increased pressure |
  • | OPERATING TEMPERATURE ---> Heating a previously ambient bath |
  • | VENTILATION ALTERATIONS ---> LEV duct additions, fan degradation |
  • | WORK PRACTICE CHANGES ---> Manual pouring vs automated pumping |
  • | REGULATORY / OEL REDUCTIONS ---> ACGIH TLV lowered, OSHA PEL updated |
  • +-------------------------------------------------------------------------+
  • Periodic Audit Cadence

In the absence of an MOC trigger, SEGs are reassessed based on their assigned risk tier:

Category 4 SEGs: Audited monthly to quarterly until engineering controls reduce risk to Category 2 or 1.

Category 3 SEGs: Audited annually.

Category 2 SEGs: Audited every 2 years.

Category 1 SEGs: Audited every 3 years.

  • 4. Worked Step-by-Step Qualitative Profiling Examples
  • Worked Example 8.2.1: Multi-SEG Qualitative Risk Ranking and Prioritization in a Chemical Formulation Facility

Problem: An industrial hygienist conducts an exposure assessment in a paint and coatings manufacturing plant. The walk-through survey identifies three distinct SEGs:

SEG 1 (Pigment Weighing & Charging): Operators manually dump 25 kg bags of crystalline silica flour (quartz, OEL = 0.025 mg/m³) into open hopper openings. Process is unventilated, generating visible dust clouds for 4 hours per shift. Handling: open manual.

SEG 2 (Solvent Blending Tank Cleaning): Maintenance technicians clean vessel interiors using toluene (OEL = 20 ppm). Tank has dedicated local exhaust extraction (Q = 1500 cfm), but cleaning requires open solvent wiping for 45 minutes once per week.

SEG 3 (Automated Canning & Packaging): Operators oversee an automated, fully enclosed packaging line filling cans with water-based latex resin (OEL = 10 mg/m³). No manual chemical handling; line operates with local canopy hood exhaust.

For each SEG:

Assign the Hazard Rating (HR 1–4) and Exposure Rating (ER 1–4) with detailed toxicological and operational justification.

Compute the Risk Priority Rank (HR × ER).

Assign the AIHA Risk Priority Category (1 to 4) and establish the immediate action protocol.

Solution Steps:

Evaluate SEG 1 (Pigment Weighing & Charging - Crystalline Silica):

Hazard Rating: Crystalline silica is an IARC Group 1 and ACGIH A2 confirmed human carcinogen (pulmonary silicosis, lung cancer) with an ACGIH TLV of 0.025 mg/m³ (< 0.1 mg/m³). → HR = 4.

Exposure Rating: Solid fine dust, open manual dumping, unventilated, visible dust, duration 4 hours/shift (> 50% of shift), estimated exposure > 100% of OEL. → ER = 4.

Risk Priority Rank: Rank = 4 × 4 = 16.

Risk Category: Category 4 (Critical / Unacceptable Risk) .

Action Protocol: Immediate stop-work or mandatory supplied-air/P100 respiratory protection; install local exhaust bag-dump hoppers; immediate baseline sampling.

Evaluate SEG 2 (Solvent Blending Tank Cleaning - Toluene):

Hazard Rating: Toluene has an ACGIH TLV-TWA of 20 ppm (10--100 ppm range), produces moderate CNS depression and reproductive concerns. → HR = 2.

Exposure Rating: Volatile solvent (P° = 22 mmHg at 20°C), semi-enclosed tank, active LEV present, short duration (45 min/week), estimated exposure between 10% and 50% of OEL. → ER = 2.

Risk Priority Rank: Rank = 2 × 2 = 4.

Risk Category: Category 2 (Moderate / Medium Risk) .

Action Protocol: Routine baseline monitoring (n=3--6 samples); verify LEV airflow and chemical-resistant glove selection; 2-year audit cycle.

Evaluate SEG 3 (Automated Canning - Latex Resin):

Hazard Rating: Latex resin particulate/mist has an OEL of 10 mg/m³ (nuisance particulate, low systemic toxicity). → HR = 1.

Exposure Rating: Fully automated, enclosed canning equipment, dedicated canopy LEV, no direct manual handling, estimated exposure < 10% of OEL. → ER = 1.

Risk Priority Rank: Rank = 1 × 1 = 1.

Risk Category: Category 1 (Low / De Minimis Risk) .

Action Protocol: Exposures are acceptable. No quantitative air sampling required; maintain existing preventative maintenance on exhaust; 3-year audit cycle.

Worked Example 8.2.2: Management of Change (MOC) Exposure Rating Recalculation Following Solvent Substitution

Problem: A metal degreasing operation previously cleaned precision parts in an open ultrasonic tank using 1,1,1-trichloroethane (TCA; OEL = 100 ppm, P° = 100 mmHg at 20°C), which was rated as HR=2, ER=3 (Rank=6, Category 3).

Under an MOC initiative, engineering substitutes TCA with trichloroethylene (TCE) , a solvent with OEL = 10 ppm, IARC Group 1 carcinogenicity (P° = 58 mmHg at 20°C). Concurrently, engineering adds a heated vapor degreasing cycle operating at 87°C (where TCE vapor pressure reaches 760 mmHg), but leaves the open tank lip exhaust unchanged (Q = 600 cfm, imperfect capture).

Re-evaluate the new Hazard Rating (HR) and Exposure Rating (ER) for the TCE degreasing SEG.

Calculate the revised Risk Priority Rank and determine the new AIHA Risk Category.

Detail the required IH intervention.

Solution Steps:

Determine Revised Hazard Rating (HR):

TCE is an IARC Group 1 human carcinogen (renal cell carcinoma, non-Hodgkin lymphoma) and an ACGIH A2 suspected human carcinogen with a TLV-TWA of 10 ppm. Under AIHA hazard profiling, confirmed human carcinogens receive the maximum rating.

Revised Hazard Rating: HR = 4.

Determine Revised Exposure Rating (ER):

Although ambient P° is 58 mmHg, the process operates at 87°C (boiling point), causing P° to reach 760 mmHg (100% saturation above bath).

The tank is open, and the existing lip exhaust has not been upgraded to handle boiling vapor thermal buoyancy. Exposure potential is high to extreme (> 100% of the lowered 10 ppm OEL).

Revised Exposure Rating: ER = 4.

Calculate Revised Risk Priority Rank & Action:

Revised Rank = HR × ER = 4 × 4 = 16.

Revised Category: Category 4 (Critical / Unacceptable Risk) (escalated from Category 3).

Action: The MOC substitution created an unacceptable cancer risk. The IH must mandate an immediate halt to open heated TCE degreasing, require an enclosed vacuum-degreasing system or complete vapor trap chillers, mandate supplied-air respirators during any interim operation, and execute urgent quantitative personal monitoring.