Study guide

6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments

CIH Certified Industrial Hygienist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The CIH Exam and How to Use This Guide

1.1 CIH Exam Format, Scoring, and Test-Day Logistics 1.2 Eligibility, Application Windows, Fees, and Certification Maintenance 1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan

2 Chapter 2: Basic Science & Calculations

2.1 Gas Laws and Vapor Calculations 2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure 2.3 Fluid Mechanics and Airflow Fundamentals

3 Chapter 3: Air Sampling & Instrumentation

3.1 Active and Passive Air Sampling Strategies 3.2 Particulate and Aerosol Sampling 3.3 Direct-Reading Instruments and Calibration

4 Chapter 4: Analytical Chemistry & Lab Methods

4.1 Gas Chromatography and Mass Spectrometry 4.2 High-Performance Liquid Chromatography and Ion Chromatography 4.3 Spectroscopy and Elemental Analysis 4.4 Gravimetric, Microscopy, and Wet Chemical Methods 4.5 Laboratory Quality Assurance, Chain of Custody, and Desorption Efficiency

5 Chapter 5: Biostatistics & Epidemiology

5.1 Lognormal Distributions and Exposure Data Statistics 5.2 Upper Confidence Limits (UCL95) and Compliance Decision Rules 5.3 Epidemiological Study Designs and Measures of Association 5.4 Sampling Strategy: Sample Size, Power, and Worker Selection

6 Chapter 6: Toxicology & Biological Monitoring

6.1 Dose-Response Relationships and Points of Departure 6.2 Toxicokinetics: Absorption, Distribution, Metabolism, and Elimination 6.3 Aerosol Deposition, Clearance, and Respiratory Tract Dosimetry 6.4 Hepatic, Renal, Neurologic, and Hematologic Target Organ Toxicity 6.5 Pulmonary Toxicology, Carcinogenicity, and Reproductive Hazards 6.6 OEL Frameworks, Classifications, and Excursion Limits 6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments 6.8 Biological Exposure Indices (BEIs) and Biomonitoring

7 Chapter 7: Biohazards & Indoor Environmental Quality

7.1 Mold, Fungi, and Microbial Contaminants 7.2 Infectious Agents, Bloodborne Pathogens, and Biosafety Levels 7.3 Indoor Environmental Quality (IEQ) Investigations 7.4 Sanitation, Potable Water, and Personal Hygiene Programs

8 Chapter 8: Community Exposure & Environmental Health

8.1 Clean Air Act Framework, NAAQS, and New Source Review 8.2 Hazardous Air Pollutants, CEMS, and EPA Reference Methods 8.3 Atmospheric Stability, Lapse Rates, and Plume Morphology 8.4 Gaussian Plume Modeling, Plume Rise, and Environmental Fate 8.5 HAZWOPER Scope, Mandates, and Training Tiers 8.6 Protection Levels, Site Zoning, Incident Command, and Decontamination 8.7 Water Pollution, Hazardous Waste, and Community Right-to-Know

9 Chapter 9: Health Risk Analysis & Hazard Communication

9.1 GHS Hazard Classification: Health and Physical Hazard Criteria 9.2 GHS Labels, Safety Data Sheets, and Trade Secret Rules 9.3 The AIHA Exposure Assessment Strategy and Similar Exposure Groups 9.4 Qualitative Exposure Profiling and the AIHA Risk Matrix 9.5 Quantitative Health Risk Characterization: HQ, HI, and ELCR 9.6 NIOSH Occupational Exposure Banding 9.7 Risk Communication and Reporting to Affected Parties

10 Chapter 10: Industrial Ventilation Principles & LEV Design

10.1 Elimination, Substitution, Isolation, Containment, and Process Change 10.2 LEV Hood Taxonomy and Capture Velocity Selection 10.3 Hood Airflow Equations, Entry Losses, and Hood Static Pressure 10.4 Particulate Transport Aerodynamics and Duct Sizing 10.5 Duct Friction, Fitting Losses, and System Balancing 10.6 Fan Categories and Pressure Dynamics Across the Fan 10.7 System Curves, the Fan Laws, and Density Corrections

11 Chapter 11: General Ventilation, Air Cleaning & Diagnostics

11.1 Dilution Ventilation Principles and Steady-State Modeling 11.2 Transient Purging and Air Distribution Geometry 11.3 Particulate Air Cleaning: Cyclones, Baghouses, Scrubbers, and ESPs 11.4 Gaseous Emission Control and Air Cleaner Selection 11.5 Ventilation System Troubleshooting and Testing

12 Chapter 12: Noise Measurement & Hearing Conservation

12.1 Acoustic Physics and Decibel Mathematics 12.2 Sound Propagation, Octave Bands, and Frequency Weighting 12.3 Noise Dose Metrics and OSHA versus ACGIH Criteria 12.4 Exchange Rates, Extended Shifts, and Dosimetry Field Protocols 12.5 Engineering Noise Controls and Hearing Protector Attenuation 12.6 Hearing Conservation Programs and Standard Threshold Shifts 12.7 Hand-Arm and Whole-Body Vibration

13 Chapter 13: Thermal Stress Assessment & Control

13.1 Wet Bulb Globe Temperature (WBGT) and Heat Stress Indices 13.2 Heat-Related Disorders, Acclimatization, and Work/Rest Regimens 13.3 Cold Stress Evaluation and Wind Chill

14 Chapter 14: Ionizing Radiation Protection

14.1 Ionizing Radiation Physics and Radioactive Decay Kinetics 14.2 Radiation Units, Radiobiology, and Health Effects 14.3 ALARA, Stay-Time, and the Inverse Square Law 14.4 Shielding Physics, Material Selection, and Gamma Constants 14.5 Radiation Detection Instruments and Spectrometry 14.6 Personnel Dosimetry, Dose Limits, and Contamination Surveys

15 Chapter 15: Non-Ionizing Radiation & Laser Safety

15.1 The Non-Ionizing Spectrum and Static/ELF Field Exposures 15.2 Radiofrequency and Microwave Exposure: SAR, Standards, and Surveys 15.3 Ultraviolet, Visible, and Infrared Radiation Hazards 15.4 Laser Safety Classifications and Optical Density Calculations 15.5 Illumination, Lighting Design, and Visual Performance

16 Chapter 16: Non-Engineering Controls & Personal Protective Equipment

16.1 Respiratory Protection Programs and Assigned Protection Factors 16.2 Maximum Use Concentration, Oxygen Deficiency, and Breathing Air 16.3 Particulate Filters, Sorbent Cartridges, and Change Schedules 16.4 Respirator Fit Testing Protocols 16.5 Chemical Protective Clothing and Dermal Exposure Control

17 Chapter 17: Ergonomics & Workstation Design

17.1 Soft-Tissue Biomechanics and WMSD Pathophysiology 17.2 Ergonomic Risk Factors and Their Interaction Effects 17.3 The Revised NIOSH Lifting Equation 17.4 RULA, REBA, the Strain Index, and the ACGIH HAL TLV 17.5 Anthropometry and Workstation Geometry 17.6 VDT Workstations, Hand Tool Design, and Administrative Ergonomics

18 Chapter 18: Work Environments & Industrial Processes

18.1 Welding Fume Emissions, Metal Fume Fever, and Cr(VI)/Manganese Toxicology 18.2 Foundry Operations and Hot Work Fire Prevention 18.3 Vapor Degreasing, Pickling, Electroplating, and Cyanide Baths 18.4 Spray Coatings, Isocyanates, and Semiconductor Manufacturing 18.5 Confined Spaces and High-Hazard Industrial Operations 18.6 Asbestos, Lead, and Silica: Regulated Substance Programs 18.7 Abrasive Blasting and Surface Preparation

19 Chapter 19: IH Program Management & Professional Ethics

19.1 The BGC Code of Ethics: Canons and Enforcement 19.2 Professional Liability, Standard of Care, and Expert Testimony 19.3 Occupational Health & Safety Management Systems (ISO 45001, ANSI Z10) 19.4 Exposure Records Access and Medical Surveillance 19.5 OSHA Injury and Illness Recordkeeping and Enforcement

6.7 Chemical Mixtures and Extended Work-Shift OEL Adjustments

Key Takeaways Explain This Topic AI

For agents with additive effects on the same target organ, the mixture exposure index is the sum of Ci/Ti; a value above 1.0 means the mixture exceeds the limit even when no single agent does.

Additivity is the default assumption only when agents share a target organ or mechanism; independent effects are evaluated agent by agent.

The OSHA formula for a mixture PEL applies to liquid mixtures where the airborne composition mirrors the liquid composition; it is not interchangeable with the additive mixture index.

The Brief and Scala model reduces the OEL for extended shifts by (8/h)·((24−h)/16), so a 12-hour shift gives a reduction factor of 0.5, while the OSHA noise adjustment uses a different logarithmic formula.

Last updated: August 2026

Chemical Mixtures and Extended Work-Shift OEL Adjustments

A single-agent, eight-hour comparison is the easy case. Real workplaces present several agents at once and shifts that are not eight hours long, and both situations have specific arithmetic that appears on every CIH exam.

1. Chemical Mixture Exposure Assessment

In industrial hygiene practice, workers are rarely exposed to single isolated chemicals. Painting, degreasing, printing, and composite fabrication involve multi-solvent vapors and chemical mixtures.

Toxicological Interaction Types

Interaction Type Mathematical Representation Toxicological Mechanism & Example

Additive 1 + 1 = 2 Chemicals act on the same target organ or share metabolic/toxic mechanisms (e.g., Acetone and Methyl Ethyl Ketone causing CNS depression).

Synergistic 1 + 1 = 5 Combined effect is significantly greater than the sum of individual effects (e.g., Asbestos exposure and cigarette smoking in producing lung cancer; Carbon tetrachloride and Ethanol hepatotoxicity).

Potentiation 0 + 1 = 4 A non-toxic substance enhances the toxicity of another chemical (e.g., Isopropanol potentiating Carbon tetrachloride liver injury via CYP2E1 induction).

Antagonistic 1 + 1 = 0.5 (or 0) One chemical interferes with or counteracts the action of another (e.g., Ethanol competitively blocking alcohol dehydrogenase bioactivation of Ethylene Glycol or Methanol).

Independent 1 + 1 = 1, 1 Chemicals act on completely different target organs and physiological systems (e.g., Lead dust targeting kidneys and Acetone vapor causing acute CNS narcosis).

The Additive Mixture Formula (OSHA & ACGIH)

When two or more hazardous chemicals in a mixture share similar toxicological target organs or biological mechanisms, their combined effect is evaluated as additive : ∑ i = 1 n C i T i = C 1 T 1 + C 2 T 2 + C 3 T 3 + ⋯ + C n T n ≤ 1.0 \mathbf{\sum_{i=1}^{n} \frac{C_i}{T_i} = \frac{C_1}{T_1} + \frac{C_2}{T_2} + \frac{C_3}{T_3} + \dots + \frac{C_n}{T_n} \le 1.0} i = 1 ∑ n ​ T i ​ C i ​ ​ = T 1 ​ C 1 ​ ​ + T 2 ​ C 2 ​ ​ + T 3 ​ C 3 ​ ​ + ⋯ + T n ​ C n ​ ​ ≤ 1.0

Where:

Ci = Measured airborne concentration of chemical i (in ppm or mg/m³)

Ti = Corresponding Occupational Exposure Limit (PEL or TLV) for chemical i (in identical units)

Interpretation:

If Σ Ci/Ti ≤ 1.0, the combined exposure is within acceptable limits .

If Σ Ci/Ti > 1.0, the exposure limit for the mixture is exceeded , even if every individual chemical concentration is below its respective standalone OEL (Ci < Ti).

Calculating Equivalent Mixture Exposure Limit (Tmix)

When evaluating a liquid solvent mixture with known liquid composition and vapor fractions, the equivalent mixture threshold limit (Tmix) in mg/m³ or ppm is: T mix = C total ∑ i = 1 n C i T i = 1.0 ∑ i = 1 n f i T i T_{\text{mix}} = \frac{C_{\text{total}}}{\sum_{i=1}^{n} \frac{C_i}{T_i}} = \frac{1.0}{\sum_{i=1}^{n} \frac{f_i}{T_i}} T mix ​ = ∑ i = 1 n ​ T i ​ C i ​ ​ C total ​ ​ = ∑ i = 1 n ​ T i ​ f i ​ ​ 1.0 ​

Where fi = Ci / Ctotal is the concentration fraction of component i in the airborne vapor mixture.

Independent Mixture Assessment

If the components act on entirely distinct physiological systems with completely unrelated health endpoints, additivity does not apply. Each substance is evaluated independently against its own standard: C 1 T 1 ≤ 1.0 , C 2 T 2 ≤ 1.0 , … , C n T n ≤ 1.0 \frac{C_1}{T_1} \le 1.0, \quad \frac{C_2}{T_2} \le 1.0, \quad \dots, \quad \frac{C_n}{T_n} \le 1.0 T 1 ​ C 1 ​ ​ ≤ 1.0 , T 2 ​ C 2 ​ ​ ≤ 1.0 , … , T n ​ C n ​ ​ ≤ 1.0

2. Extended Work Shifts and OEL Adjustments

Traditional 8-hour workday / 40-hour workweek schedules are increasingly replaced in modern industrial facilities by non-traditional schedules (e.g., 10-hour shifts, 12-hour shifts, or 14-day rotational offshore shifts). Extended shifts cause a dual physiological stress :

Increased daily exposure duration (t_ extexp > 8 hours).

Reduced daily biological recovery and elimination time (24 - t_ extexp < 16 hours).

Consequently, body burden accumulates to higher steady-state levels than would occur under an 8-hour shift, requiring downward adjustment of exposure limits. +-------------------------------------------------------------+

  • | EXTENDED SHIFT ADJUSTMENT MODELS |
  • +-------------------------------------------------------------+
  • | |
  • | BRIEF & SCALA MODEL |
  • | - Most widely used, highly conservative empirical model |
  • | - Daily: RF = (8 / h) * ((24 - h) / 16) |
  • | - Weekly: RF = (40 / h_w) * ((168 - h_w) / 128) |
  • | - Applies to systemic toxicants with t1/2 ~ 4 to 24 hours |
  • | |
  • | OSHA ADJUSTMENT MODELS |
  • | - Category 1A (Irritants / Ceiling): NO reduction |
  • | - Category 1B (Acute Toxicants): PEL_adj = PEL * (8 / h) |
  • | - Category 2 (Cumulative Toxicants / Lead): |
  • | PEL_adj = PEL * (40 / h_w) or PEL * (8 / h) |
  • | (e.g., Lead PEL_adj = 400 / h ug/m3) |
  • | |
  • | PHARMACOKINETIC MODELS (Hickey-Keith, Pharmacokinetic) |
  • | - Uses specific biological elimination half-life (t1/2) |
  • | - Avoids over-regulation for very long or very short t1/2 |
  • +-------------------------------------------------------------+
  • The Brief & Scala Model

The Brief & Scala Model is an empirical mathematical adjustment developed to modify 8-hour TLVs for non-standard schedules:

1. Daily Reduction Factor (RFdaily) for shifts > 8 hours/day: R F daily = ( 8 h ) × ( 24 − h 16 ) \mathbf{RF_{\text{daily}} = \left(\frac{8}{h}\right) \times \left(\frac{24 - h}{16}\right)} R F daily ​ = ( h 8 ​ ) × ( 16 24 − h ​ ) O E L adj = O E L × R F daily = O E L × ( 8 h ) × ( 24 − h 16 ) \mathbf{OEL_{\text{adj}} = OEL \times RF_{\text{daily}} = OEL \times \left(\frac{8}{h}\right) \times \left(\frac{24 - h}{16}\right)} OE L adj ​ = OEL × R F daily ​ = OEL × ( h 8 ​ ) × ( 16 24 − h ​ )

Where h is the daily work shift length in hours (h > 8).

2. Weekly Reduction Factor (RFweekly) for schedules > 40 hours/week: R F weekly = ( 40 h w ) × ( 168 − h w 128 ) \mathbf{RF_{\text{weekly}} = \left(\frac{40}{h_w}\right) \times \left(\frac{168 - h_w}{128}\right)} R F weekly ​ = ( h w ​ 40 ​ ) × ( 128 168 − h w ​ ​ )

Where hw is the total hours worked per 7-day week (168 hours total in a week, 128 hours non-work in standard schedule). If both daily and weekly hours are non-standard, the more restrictive (smaller) RF is selected.

Reduction Factor Matrix for Common Work Schedules

  • Shift Duration (h) Non-Work Recovery Time (24 - h) Brief & Scala RFdaily Adjusted Limit (% of 8-hr TLV)
  • 8 Hours 16 hours (8/8) × (16/16) = 1.000 100.0% (Standard)
  • 10 Hours 14 hours (8/10) × (14/16) = 0.700 70.0%
  • 12 Hours 12 hours (8/12) × (12/16) = 0.500 50.0% (Half the 8-hr TLV)
  • 14 Hours 10 hours (8/14) × (10/16) = 0.357 35.7%
  • Critical Restrictions on OEL Adjustments

Ceiling Limits (C): NEVER adjusted. Peak concentrations causing immediate acute damage or irritant threshold breach are independent of work shift duration.

Pure Sensory Irritants: Exposure limits based strictly on upper respiratory or ocular irritation (e.g., Ammonia, Formaldehyde) are NOT adjusted , because sensory irritation depends on instantaneous peak concentration rather than cumulative dose over time.

Substances with Very Long Half-Lives (t(1/2) > 1,000 hours): For cumulative toxins like Lead or Cadmium, daily shift fluctuations do not change steady-state bone/organ burdens; adjust based purely on weekly hours (40 / hw) rather than daily Brief & Scala.

  • 3. Worked Step-by-Step Calculation Examples
  • Worked Example 5.3.1: 8-Hour Time-Weighted Average (TWA) Calculation

Problem: An industrial hygiene personal air monitoring survey is performed for a degreasing operator exposed to trichloroethylene (TCE, OSHA PEL = 100 ppm, ACGIH TLV = 10 ppm). The monitoring results across the shift are as follows:

  • 08:00 to 10:00 (120 min): C1 = 15.0 ppm
  • 10:00 to 12:00 (120 min): C2 = 30.0 ppm
  • 12:00 to 13:00 (60 min, lunch in clean breakroom): C3 = 0.0 ppm
  • 13:00 to 16:00 (180 min): C4 = 8.0 ppm

Calculate the employee's 8-hour Time-Weighted Average exposure (TWA8).

Evaluate compliance against both the OSHA PEL (100 ppm) and ACGIH TLV (10 ppm).

Solution Steps:

Calculate total cumulative concentration-time product: ∑ ( C i × t i ) = ( 15.0 × 120 ) + ( 30.0 × 120 ) + ( 0.0 × 60 ) + ( 8.0 × 180 ) \sum (C_i \times t_i) = (15.0 \times 120) + (30.0 \times 120) + (0.0 \times 60) + (8.0 \times 180) ∑ ( C i ​ × t i ​ ) = ( 15.0 × 120 ) + ( 30.0 × 120 ) + ( 0.0 × 60 ) + ( 8.0 × 180 ) ∑ ( C i × t i ) = 1 , 800 + 3 , 600 + 0 + 1 , 440 = 6 , 840 ppm ⋅ min \sum (C_i \times t_i) = 1,800 + 3,600 + 0 + 1,440 = 6,840\,\text{ppm}\cdot\text{min} ∑ ( C i ​ × t i ​ ) = 1 , 800 + 3 , 600 + 0 + 1 , 440 = 6 , 840 ppm ⋅ min

Divide by full 8-hour shift duration (480 minutes): T W A 8 = 6 , 840 ppm ⋅ min 480 min = 14.25 ppm TWA_8 = \frac{6,840\,\text{ppm}\cdot\text{min}}{480\,\text{min}} = 14.25\,\text{ppm} T W A 8 ​ = 480 min 6 , 840 ppm ⋅ min ​ = 14.25 ppm

Compliance Evaluation:

OSHA PEL (100 ppm): 14.25 ppm ≤ 100 ppm → In Compliance.

ACGIH TLV (10 ppm): 14.25 ppm > 10 ppm → Exceeds TLV.

Result: The employee's 8-hour TWA is 14.3 ppm , complying with the OSHA PEL but exceeding the health-based ACGIH TLV.

Worked Example 5.3.2: Multicomponent Solvent Mixture Evaluation (Additive Formula)

Problem: In a spray painting booth, air monitoring reveals the simultaneous presence of three solvents with additive central nervous system depression effects:

  • Acetone: Measured C1 = 150 ppm (ACGIH TLV T1 = 250 ppm)
  • Methyl Ethyl Ketone (MEK): Measured C2 = 60 ppm (ACGIH TLV T2 = 200 ppm)
  • Methyl Isobutyl Ketone (MIBK): Measured C3 = 12 ppm (ACGIH TLV T3 = 20 ppm)

Calculate the additive mixture exposure index (Imix).

Determine whether the mixture exposure complies with ACGIH additive standards.

Solution Steps:

Calculate individual exposure ratios (Ci / Ti): C acetone T acetone = 150 ppm 250 ppm = 0.60 \frac{C_{\text{acetone}}}{T_{\text{acetone}}} = \frac{150\,\text{ppm}}{250\,\text{ppm}} = 0.60 T acetone ​ C acetone ​ ​ = 250 ppm 150 ppm ​ = 0.60 C MEK T MEK = 60 ppm 200 ppm = 0.30 \frac{C_{\text{MEK}}}{T_{\text{MEK}}} = \frac{60\,\text{ppm}}{200\,\text{ppm}} = 0.30 T MEK ​ C MEK ​ ​ = 200 ppm 60 ppm ​ = 0.30 C MIBK T MIBK = 12 ppm 20 ppm = 0.60 \frac{C_{\text{MIBK}}}{T_{\text{MIBK}}} = \frac{12\,\text{ppm}}{20\,\text{ppm}} = 0.60 T MIBK ​ C MIBK ​ ​ = 20 ppm 12 ppm ​ = 0.60

Apply the Additive Mixture Formula: I mix = ∑ i = 1 n C i T i = 0.60 + 0.30 + 0.60 = 1.50 I_{\text{mix}} = \sum_{i=1}^{n} \frac{C_i}{T_i} = 0.60 + 0.30 + 0.60 = 1.50 I mix ​ = i = 1 ∑ n ​ T i ​ C i ​ ​ = 0.60 + 0.30 + 0.60 = 1.50

Compliance Determination:

Because every individual chemical is below its standalone TLV (150 < 250, 60 < 200, 12 < 20), a naive single-chemical assessment would assume compliance.

However, because Imix = 1.50 > 1.00, the mixture limit is exceeded by 50% , representing an unacceptable combined narcotic exposure.

Result: The mixture index is 1.50 , indicating an overexposure under the additive mixture standard.

Worked Example 5.3.3: Extended Work Shift (12-Hour) Adjustment via Brief & Scala Model

Problem: Chemical processing operators work 12-hour shifts (h = 12) at a petrochemical refinery. An operator is exposed to n-hexane (8-hour ACGIH TLV-TWA = 50 ppm, skin).

Calculate the Brief & Scala daily reduction factor (RFdaily).

Calculate the adjusted TLV-TWA for this 12-hour work schedule.

If 12-hour personal sampling demonstrates an unadjusted TWA concentration of 32 ppm, determine compliance.

Solution Steps:

Calculate the Brief & Scala daily reduction factor: R F daily = ( 8 h ) × ( 24 − h 16 ) = ( 8 12 ) × ( 24 − 12 16 ) = ( 2 3 ) × ( 12 16 ) = 2 3 × 3 4 = 0.500 RF_{\text{daily}} = \left(\frac{8}{h}\right) \times \left(\frac{24 - h}{16}\right) = \left(\frac{8}{12}\right) \times \left(\frac{24 - 12}{16}\right) = \left(\frac{2}{3}\right) \times \left(\frac{12}{16}\right) = \frac{2}{3} \times \frac{3}{4} = 0.500 R F daily ​ = ( h 8 ​ ) × ( 16 24 − h ​ ) = ( 12 8 ​ ) × ( 16 24 − 12 ​ ) = ( 3 2 ​ ) × ( 16 12 ​ ) = 3 2 ​ × 4 3 ​ = 0.500

Calculate the adjusted TLV (TLVadj): T L V adj = T L V × R F daily = 50 ppm × 0.500 = 25.0 ppm TLV_{\text{adj}} = TLV \times RF_{\text{daily}} = 50\,\text{ppm} \times 0.500 = 25.0\,\text{ppm} T L V adj ​ = T L V × R F daily ​ = 50 ppm × 0.500 = 25.0 ppm

Compliance Evaluation:

Measured 12-hour TWA = 32 ppm.

Compared to standard 8-hour TLV (50 ppm), it appears compliant (32 < 50).

Compared to adjusted 12-hour TLV (25.0 ppm), 32 ppm > 25.0 ppm → Non-Compliant.

Result: The Brief & Scala reduction factor is 0.500 , lowering the allowable 12-hour limit to 25.0 ppm ; the worker's exposure of 32 ppm represents a verified overexposure.